[Mon May  7 11:54:33 2012] Detection parameters:
  Position = (312.5, 295.9) = 14 40 32.61 -62 37 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7573.3 +/- 112.1
  Background counts = 450.3
  Rate = 0.1 +/- 0.002

[Mon May  7 11:55:31 2012] Off-axis axis estimate = 1.03'
[Sat May 12 06:21:53 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Sat May 12 06:21:53 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Sat May 12 06:21:53 2012] source mask rpix=1.6, npix_max = 17, mask sum = 18, frac = 1.024
[Sat May 12 06:21:53 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.95"
[Sat May 12 23:02:35 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src11.ximg exists
[Sat May 12 23:02:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src11.csv
[Sat May 12 23:02:35 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat May 12 23:02:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src11.csv
[Sat May 12 23:02:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:02:38 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat May 12 23:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat May 12 23:02:38 2012] fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat May 12 23:02:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat May 12 23:02:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 23:04:38 2012] Spatial fit model total counts = 36827.700000, observed total counts = 31361.000000
[Sat May 12 23:04:38 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 23:04:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:40 2012] Assessing source extent using major
[Sat May 12 23:04:40 2012] Source does appear to be extended
[Sat May 12 23:04:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:40 2012] Source is confused with source 19
[Wed May 16 15:23:07 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Wed May 16 15:23:07 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Wed May 16 15:23:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 18, frac = 1.024
[Wed May 16 15:23:07 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.95"