[Mon May  7 11:53:36 2012] Detection parameters:
  Position = (312.8, 256.1) = 14 40 32.41 -62 40 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7358.0 +/- 109.7
  Background counts = 219.2
  Rate = 0.1 +/- 0.002

[Mon May  7 11:54:26 2012] Off-axis axis estimate = 3.24'
[Thu May 10 23:27:31 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Thu May 10 23:27:31 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Thu May 10 23:27:31 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.679
[Thu May 10 23:27:31 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.05"
[Sat May 12 06:21:47 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src5.ximg exists
[Sat May 12 06:21:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src5.csv
[Sat May 12 06:21:47 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat May 12 06:21:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src5.csv
[Sat May 12 06:21:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 06:21:50 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat May 12 06:21:50 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat May 12 06:21:50 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat May 12 23:04:05 2012] Spatial fit model total counts = 34108.200000, observed total counts = 34757.000000
[Sat May 12 23:04:05 2012] Offset between fit and detection position for source 5 = 2.763718 pixels
[Sat May 12 23:04:05 2012] 32264.200000 total counts/ 21394.500000 bgd. counts: snr = 74.313290
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.763718 pixels
  Position = (312.7, 258.9) = 14 40 32.43 -62 40 21.0
  Extent = 14.1 (13.4-14.9)", rotation angle = 0
  Source counts = 10869.7 +/- 179.6
  Background counts = 21394.5
  Rate = 0.1 +/- 0.002
[Sat May 12 23:04:07 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:07 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:07 2012] Source does appear to be extended
[Sat May 12 23:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:07 2012] Source is confused with source 2
[Tue May 15 06:48:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 06:48:28 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Tue May 15 06:48:28 2012] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.873
[Tue May 15 06:48:28 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.12"
[Wed May 16 15:22:59 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 16 15:22:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src5.csv
[Wed May 16 15:22:59 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 16 15:22:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src5.csv
[Wed May 16 15:22:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 15:23:02 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 16 15:23:02 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 16 15:23:02 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly