[Mon May  7 11:54:16 2012] Detection parameters:
  Position = (236.9, 251.1) = 14 41 20.34 -62 40 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1218.5 +/- 57.0
  Background counts = 562.3
  Rate = 0.03 +/- 0.001

[Mon May  7 11:54:26 2012] Off-axis axis estimate = 5.63'
[Thu May 10 23:27:31 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Thu May 10 23:27:31 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Thu May 10 23:27:31 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.306
[Thu May 10 23:27:31 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.24"
[Sat May 12 06:21:49 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src61.ximg exists
[Sat May 12 06:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src61.csv
[Sat May 12 06:21:49 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat May 12 06:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src61.csv
[Sat May 12 06:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 06:21:52 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat May 12 06:21:52 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat May 12 06:21:52 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sat May 12 23:04:06 2012] Spatial fit model total counts = 10871.600000, observed total counts = 10287.000000
[Sat May 12 23:04:06 2012] Offset between fit and detection position for source 245 = 4.059207 pixels
[Sat May 12 23:04:06 2012] 10424.360000 total counts/ 6585.000000 bgd. counts: snr = 47.313050
Spatial fit parameters:
  Offset between fit and detection position for source 245 = 4.059207 pixels
  Position = (238.7, 254.7) = 14 41 19.20 -62 40 38.8
  Extent = 18.5 (18.4-37.0)", rotation angle = 0
  Source counts = 3839.4 +/- 102.1
  Background counts = 6585.0
  Rate = 0.05 +/- 0.001
[Sat May 12 23:04:07 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:07 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:07 2012] Source does appear to be extended
[Sat May 12 23:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:07 2012] Source is confused with source 234
[Tue May 15 06:48:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 06:48:28 2012] Initial guess for spatial extent in simple fitting = 18.49"
[Tue May 15 06:48:28 2012] source mask rpix=4.3, npix_max = 90, mask sum = 77, frac = 0.853
[Tue May 15 06:48:28 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 18.49"
[Wed May 16 15:23:01 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src55.ximg exists
[Wed May 16 15:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src55.csv
[Wed May 16 15:23:01 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src55_1.ximg exists
[Wed May 16 15:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src55.csv
[Wed May 16 15:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 15:23:05 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Wed May 16 15:23:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Wed May 16 15:23:05 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Wed May 16 15:23:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Wed May 16 15:23:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes