[Mon May  7 11:54:10 2012] Detection parameters:
  Position = (335.0, 301.0) = 14 40 18.40 -62 37 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4297.0 +/- 85.7
  Background counts = 253.1
  Rate = 0.06 +/- 0.001

[Mon May  7 11:54:26 2012] Off-axis axis estimate = 2.66'
[Thu May 10 23:27:31 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Thu May 10 23:27:31 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Thu May 10 23:27:31 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.767
[Thu May 10 23:27:31 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.76"
[Sat May 12 06:21:48 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src30.ximg exists
[Sat May 12 06:21:48 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat May 12 06:21:48 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src30 appears to have run properly
[Sat May 12 06:21:51 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat May 12 06:21:51 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat May 12 06:21:51 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sat May 12 23:04:05 2012] Spatial fit model total counts = 19870.500000, observed total counts = 19862.000000
[Sat May 12 23:04:05 2012] Offset between fit and detection position for source 216 = 1.074072 pixels
[Sat May 12 23:04:05 2012] 18782.160000 total counts/ 16742.200000 bgd. counts: snr = 15.765777
Spatial fit parameters:
  Offset between fit and detection position for source 216 = 1.074072 pixels
  Position = (335.6, 301.9) = 14 40 18.02 -62 37 13.7
  Extent = 10.4 (9.4-11.5)", rotation angle = 0
  Source counts = 2040.0 +/- 137.0
  Background counts = 16742.2
  Rate = 0.03 +/- 0.002
[Sat May 12 23:04:07 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:07 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:07 2012] Source does appear to be extended
[Sat May 12 23:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 06:48:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 06:48:28 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Tue May 15 06:48:28 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.899
[Tue May 15 06:48:28 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 10.39"
[Wed May 16 15:23:00 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src27.ximg exists
[Wed May 16 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src27.csv
[Wed May 16 15:23:00 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed May 16 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src27.csv
[Wed May 16 15:23:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 15:23:03 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed May 16 15:23:03 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed May 16 15:23:03 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly