[Mon May  7 11:53:40 2012] Detection parameters:
  Position = (217.9, 202.1) = 14 41 32.42 -62 44 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2777.8 +/- 74.8
  Background counts = 391.9
  Rate = 0.04 +/- 0.001

[Mon May  7 11:54:26 2012] Off-axis axis estimate = 9.10'
[Thu May 10 23:27:31 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Thu May 10 23:27:31 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Thu May 10 23:27:31 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Thu May 10 23:27:31 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 10.98"
[Sat May 12 06:21:48 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src48.ximg exists
[Sat May 12 06:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src48.csv
[Sat May 12 06:21:48 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src48_1.ximg exists
[Sat May 12 06:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src48.csv
[Sat May 12 06:21:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 06:21:51 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sat May 12 06:21:51 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sat May 12 06:21:51 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Sat May 12 23:04:06 2012] Spatial fit model total counts = 14045.700000, observed total counts = 14078.000000
[Sat May 12 23:04:06 2012] Offset between fit and detection position for source 20 = 5.953826 pixels
[Sat May 12 23:04:06 2012] 15038.720000 total counts/ 8391.370000 bgd. counts: snr = 72.565821
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 5.953826 pixels
  Position = (212.4, 199.9) = 14 41 35.92 -62 44 37.0
  Extent = 22.0 (21.9-43.9)", rotation angle = 0
  Source counts = 6647.4 +/- 122.6
  Background counts = 8391.4
  Rate = 0.09 +/- 0.002
[Sat May 12 23:04:07 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:07 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:07 2012] Source does appear to be extended
[Sat May 12 23:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:07 2012] Source is confused with source 21
[Tue May 15 06:48:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 06:48:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 06:48:28 2012] Initial guess for spatial extent in simple fitting = 21.96"
[Tue May 15 06:48:28 2012] source mask rpix=5.0, npix_max = 123, mask sum = 119, frac = 0.967
[Tue May 15 06:48:28 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 21.96"
[Wed May 16 15:23:00 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src44.ximg exists
[Wed May 16 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src44.csv
[Wed May 16 15:23:00 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src44_1.ximg exists
[Wed May 16 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src44.csv
[Wed May 16 15:23:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 15:23:04 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Wed May 16 15:23:04 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Wed May 16 15:23:04 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly