[Mon May  7 11:53:39 2012] Detection parameters:
  Position = (291.0, 257.1) = 14 40 46.15 -62 40 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6885.3 +/- 107.7
  Background counts = 444.3
  Rate = 0.1 +/- 0.002

[Mon May  7 11:54:26 2012] Off-axis axis estimate = 3.04'
[Thu May 10 23:27:31 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Thu May 10 23:27:31 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Thu May 10 23:27:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.692
[Thu May 10 23:27:31 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.95"
[Sat May 12 06:21:47 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 12 06:21:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src9.csv
[Sat May 12 06:21:47 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 12 06:21:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src9.csv
[Sat May 12 06:21:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 06:21:50 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 12 06:21:50 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 12 06:21:50 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat May 12 23:04:05 2012] Spatial fit model total counts = 30969.600000, observed total counts = 31086.000000
[Sat May 12 23:04:05 2012] Offset between fit and detection position for source 16 = 2.506788 pixels
[Sat May 12 23:04:05 2012] 28963.110000 total counts/ 19699.500000 bgd. counts: snr = 66.001326
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.506788 pixels
  Position = (292.7, 259.0) = 14 40 45.09 -62 40 20.4
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source counts = 9263.6 +/- 170.2
  Background counts = 19699.5
  Rate = 0.1 +/- 0.002
[Sat May 12 23:04:07 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:07 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:07 2012] Source does appear to be extended
[Sat May 12 23:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:07 2012] Source is confused with source 240
[Tue May 15 06:48:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 06:48:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 15 06:48:28 2012] Initial guess for spatial extent in simple fitting = 15.90"
[Tue May 15 06:48:28 2012] source mask rpix=3.7, npix_max = 69, mask sum = 61, frac = 0.883
[Tue May 15 06:48:28 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 15.90"
[Wed May 16 15:22:59 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 16 15:22:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src9.csv
[Wed May 16 15:22:59 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 16 15:22:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src9.csv
[Wed May 16 15:22:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 15:23:02 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 16 15:23:02 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 16 15:23:02 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly