[Mon May  7 11:53:56 2012] Detection parameters:
  Position = (305.3, 398.5) = 14 40 37.16 -62 30 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1413.8 +/- 53.3
  Background counts = 404.2
  Rate = 0.03 +/- 0.001

[Mon May  7 11:54:26 2012] Off-axis axis estimate = 7.27'
[Thu May 10 23:27:31 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Thu May 10 23:27:31 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Thu May 10 23:27:31 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.758
[Thu May 10 23:27:31 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 10.06"
[Sat May 12 06:21:49 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src56.ximg exists
[Sat May 12 06:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src56.csv
[Sat May 12 06:21:49 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src56_1.ximg exists
[Sat May 12 06:21:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src56.csv
[Sat May 12 06:21:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 06:21:52 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sat May 12 06:21:52 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sat May 12 06:21:52 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Sat May 12 23:04:06 2012] Warning, spatial fit 56 centroid is now closest to src. 122
[Sat May 12 23:04:07 2012] Spatial fit model total counts = 12032.400000, observed total counts = 12239.000000
[Sat May 12 23:04:07 2012] Offset between fit and detection position for source 123 = 2.255842 pixels
[Sat May 12 23:04:07 2012] Warning, changing simple spatial fit ID from 56 to 81
[Sat May 12 23:04:07 2012] 11934.092000 total counts/ 11536.300000 bgd. counts: snr = 3.703589
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 2.255842 pixels
  Position = (305.5, 400.7) = 14 40 37.00 -62 30 3.9
  Extent = 7.7 (5.6-10.7)", rotation angle = 0
  Source counts = 397.8 +/- 109.2
  Background counts = 11536.3
  Rate = 0.005 +/- 0.002
[Sat May 12 23:04:07 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:07 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:07 2012] Source does appear to be extended
[Sat May 12 23:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:07 2012] Source is confused with source 122
[Tue May 15 06:48:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 06:48:28 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue May 15 06:48:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Tue May 15 06:48:28 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 7.71"
[Wed May 16 15:23:00 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src50.ximg exists
[Wed May 16 15:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src50.csv
[Wed May 16 15:23:01 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src50_1.ximg exists
[Wed May 16 15:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src50.csv
[Wed May 16 15:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 15:23:04 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Wed May 16 15:23:04 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Wed May 16 15:23:04 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly