[Mon May  7 11:53:56 2012] Detection parameters:
  Position = (318.0, 400.8) = 14 40 29.19 -62 30 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1957.6 +/- 58.1
  Background counts = 276.0
  Rate = 0.04 +/- 0.001

[Mon May  7 11:54:26 2012] Off-axis axis estimate = 7.55'
[Thu May 10 23:27:31 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Thu May 10 23:27:31 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Thu May 10 23:27:31 2012] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.741
[Thu May 10 23:27:31 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 10.20"
[Sat May 12 06:21:48 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src44.ximg exists
[Sat May 12 06:21:48 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src44_1.ximg exists
[Sat May 12 06:21:48 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src44 appears to have run properly
[Sat May 12 06:21:51 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sat May 12 06:21:51 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sat May 12 06:21:51 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Sat May 12 23:04:06 2012] Spatial fit model total counts = 11420.200000, observed total counts = 11631.000000
[Sat May 12 23:04:06 2012] Offset between fit and detection position for source 120 = 2.696979 pixels
[Sat May 12 23:04:06 2012] 10045.930000 total counts/ 7289.530000 bgd. counts: snr = 32.284382
Spatial fit parameters:
  Offset between fit and detection position for source 120 = 2.696979 pixels
  Position = (317.2, 403.3) = 14 40 29.66 -62 29 52.4
  Extent = 16.1 (13.8-18.8)", rotation angle = 0
  Source counts = 2756.4 +/- 100.2
  Background counts = 7289.5
  Rate = 0.04 +/- 0.001
[Sat May 12 23:04:07 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:07 2012] Assessing source extent using major axis lower bound
[Sat May 12 23:04:07 2012] Source does appear to be extended
[Sat May 12 23:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 23:04:07 2012] Source is confused with source 122
[Tue May 15 06:48:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 15 06:48:28 2012] Initial guess for spatial extent in simple fitting = 16.13"
[Tue May 15 06:48:28 2012] source mask rpix=3.7, npix_max = 70, mask sum = 56, frac = 0.791
[Tue May 15 06:48:28 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 16.13"
[Wed May 16 15:23:00 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src40.ximg exists
[Wed May 16 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src40.csv
[Wed May 16 15:23:00 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src40_1.ximg exists
[Wed May 16 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src40.csv
[Wed May 16 15:23:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 15:23:04 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Wed May 16 15:23:04 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Wed May 16 15:23:04 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly