[Mon May  7 11:53:35 2012] Detection parameters:
  Position = (243.8, 210.1) = 14 41 16.07 -62 43 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5886.8 +/- 99.5
  Background counts = 367.9
  Rate = 0.08 +/- 0.001

[Mon May  7 11:54:26 2012] Off-axis axis estimate = 7.53'
[Thu May 10 23:27:31 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Thu May 10 23:27:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 10 23:27:31 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Thu May 10 23:27:31 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Thu May 10 23:27:31 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.19"
[Sat May 12 06:21:48 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src21.ximg exists
[Sat May 12 06:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src21.csv
[Sat May 12 06:21:48 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat May 12 06:21:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src21.csv
[Sat May 12 06:21:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 06:21:51 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat May 12 06:21:51 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat May 12 06:21:51 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat May 12 23:04:05 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.746629 pixels away
[Sat May 12 23:04:05 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.479312 pixels away
[Sat May 12 23:04:07 2012] Vigneting correction estimate = 1.000000
[Sat May 12 23:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 23:04:07 2012] Assessing source extent using major
[Sat May 12 23:04:07 2012] Source does appear to be extended
[Sat May 12 23:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 06:48:28 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Tue May 15 06:48:28 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Tue May 15 06:48:28 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Tue May 15 06:48:28 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 10.19"
[Wed May 16 15:23:00 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src18.ximg exists
[Wed May 16 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src18.csv
[Wed May 16 15:23:00 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed May 16 15:23:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src18.csv
[Wed May 16 15:23:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 15:23:03 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed May 16 15:23:03 2012] fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May 16 15:23:03 2012] Fit fullrun_mos1_xmm0504810401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly