[Sat Dec 31 13:34:33 2011] Detection parameters:
  Position = (265.6, 392.0) = 14 42 18.59 -62 7 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.0 +/- 26.4
  Background counts = 172.8
  Rate = 0.006 +/- 0.0007

[Sat Dec 31 13:34:39 2011] Off-axis axis estimate = 7.19'
[Sat Dec 31 13:48:37 2011] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 13:48:37 2011] Initial guess for spatial extent in simple fitting = 10.02"
[Sat Dec 31 13:48:37 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.954
[Sat Dec 31 13:48:37 2011] Giving source the simple spatial ID 90 for pass 0, mean size = 10.02"
[Sun Jan  1 01:12:21 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src90.ximg exists
[Sun Jan  1 01:12:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src90.csv
[Sun Jan  1 01:12:21 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src90_1.ximg exists
[Sun Jan  1 01:12:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src90.csv
[Sun Jan  1 01:12:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 01:12:24 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Sun Jan  1 01:12:24 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Sun Jan  1 01:12:24 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Sun Jan  1 23:37:48 2012] Spatial fit model total counts = 1755.060000, observed total counts = 1757.000000
[Sun Jan  1 23:37:48 2012] Offset between fit and detection position for source 95 = 2.799526 pixels
[Sun Jan  1 23:37:48 2012] Warning, changing simple spatial fit ID from 90 to 83
[Sun Jan  1 23:37:48 2012] 1857.485000 total counts/ 1253.140000 bgd. counts: snr = 17.072029
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 2.799526 pixels
  Position = (267.8, 390.2) = 14 42 17.24 -62 8 2.0
  Extent = 16.2 (14.1-17.7)", rotation angle = 0
  Source counts = 604.3 +/- 43.1
  Background counts = 1253.1
  Rate = 0.01 +/- 0.0007
[Sun Jan  1 23:37:48 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:37:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:37:48 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:37:48 2012] Source does appear to be extended
[Sun Jan  1 23:37:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:37:48 2012] Source is confused with source 24
[Sun Jan  1 23:39:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:39:59 2012] Initial guess for spatial extent in simple fitting = 16.16"
[Sun Jan  1 23:39:59 2012] source mask rpix=3.7, npix_max = 71, mask sum = 64, frac = 0.901
[Sun Jan  1 23:39:59 2012] Giving source the simple spatial ID 87 for pass 1, mean size = 16.16"
[Mon Jan  2 15:34:16 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src87.ximg exists
[Mon Jan  2 15:34:16 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src87_1.ximg exists
[Mon Jan  2 15:34:16 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src87 appears to have run properly
[Mon Jan  2 15:34:18 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Mon Jan  2 15:34:18 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Mon Jan  2 15:34:18 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Tue Jan  3 21:35:39 2012] Spatial fit model total counts = 1770.330000, observed total counts = 1757.000000
[Tue Jan  3 21:35:39 2012] Offset between fit and detection position for source 95 = 0.950762 pixels
[Tue Jan  3 21:35:39 2012] Warning, changing simple spatial fit ID from 87 to 80
[Tue Jan  3 21:35:39 2012] 1688.826000 total counts/ 1066.440000 bgd. counts: snr = 19.058627
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 0.950762 pixels
  Position = (267.7, 391.2) = 14 42 17.28 -62 7 57.9
  Extent = 15.6 (14.6-17.4)", rotation angle = 0
  Source counts = 622.4 +/- 41.1
  Background counts = 1066.4
  Rate = 0.01 +/- 0.0007
[Tue Jan  3 21:35:39 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:35:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:35:39 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:35:39 2012] Source does appear to be extended
[Tue Jan  3 21:35:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 21:37:32 2012] XMMSAS src. selection expression = ellipse(23245.054000, 33984.434000, 938.364027, 938.364027, 0.000000, X, Y)
[Tue Jan  3 21:37:32 2012] Writing source region out to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src95_src.reg
[Tue Jan  3 21:37:32 2012] Extracting stamp from image fullrun_pn_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (214, 337) - (322, 445)
[Tue Jan  3 21:37:32 2012] XMMSAS bgd. selection expression = annulus(23245.054000, 33984.434000, 1563.940045, 3127.880090, X, Y) && !ellipse(25295.720000, 28023.738200, 3486.240100, 3486.240100, 0.000000, X, Y) && !ellipse(19449.338380, 34524.164000, 1748.696050, 732.360821, 6.390220, X, Y) && !ellipse(20475.418091, 34693.686737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26162.071350, 33518.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21824.161026, 33145.355957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25956.408400, 33328.032000, 1535.704044, 1535.704044, 0.000000, X, Y) && !ellipse(23957.628000, 33383.392000, 1506.112043, 1506.112043, 0.000000, X, Y) && !ellipse(24392.082794, 32914.766663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21133.647200, 32751.275000, 872.960025, 872.960025, 0.000000, X, Y) && !ellipse(23014.310000, 33129.466000, 2934.288084, 1815.088052, 0.000000, X, Y) && !ellipse(20789.288000, 32724.366400, 1745.920050, 1745.920050, 0.000000, X, Y) && !ellipse(24675.634000, 32546.184000, 1023.952029, 1023.952029, 0.000000, X, Y) && !ellipse(35705.730000, 25282.916000, 10600.992305, 4246.392122, 33.823100, X, Y) && !ellipse(21022.598000, 34272.846000, 907.344026, 907.344026, 0.000000, X, Y) && !ellipse(24128.374664, 34465.508209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26504.509064, 34213.569824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21144.402000, 34921.058000, 3032.112087, 3032.112087, 0.000000, X, Y) && !ellipse(25435.870392, 34132.809143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21880.501800, 34428.547000, 1158.584033, 1158.584033, 0.000000, X, Y) && !ellipse(27107.448000, 33483.310000, 1558.528045, 1558.528045, 0.000000, X, Y) && !ellipse(20431.740204, 33864.807831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21667.814000, 33934.582000, 1516.056044, 1516.056044, 0.000000, X, Y) && !ellipse(25488.834600, 33357.298000, 899.120026, 899.120026, 0.000000, X, Y) && !ellipse(24039.662170, 32415.477783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22886.601532, 31933.651031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.893799, 31573.469757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25464.078000, 31344.698380, 1389.304040, 1389.304040, 0.000000, X, Y) && !ellipse(23831.710000, 31369.334800, 1411.040041, 869.648025, 39.671000, X, Y) && !ellipse(25811.628723, 35289.894806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25514.422089, 34744.573029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26184.956000, 34692.798000, 1583.168046, 1583.168046, 0.000000, X, Y) && !ellipse(26220.216458, 32322.404000, 1405.808040, 444.276399, 51.195038, X, Y) && !ellipse(24560.239075, 31986.435669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.734000, 30091.004000, 921.984027, 921.984027, 0.000000, X, Y)
[Tue Jan  3 21:37:32 2012] Writing fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src95.gif
[Wed Jan  4 03:25:14 2012] Mean detx,y = (2308.51, -6122.94) 
[Wed Jan  4 03:25:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 03:26:39 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 03:26:40 2012] Setting source spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Wed Jan  4 03:26:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Fri Jan  6 08:06:43 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:06:43 2012] Error reading totcts from fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Fri Jan  6 08:06:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:06:55 2012] Using photon index=1.80, rate=0.0103, arf fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src95.arf
[Fri Jan  6 08:06:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:06:55 2012] Updating source flux to 3.5e-14
[Fri Jan  6 08:28:11 2012] Flag c found in src. 95 procflags, skipping spectral fitting