[Sat Dec 31 13:34:33 2011] Detection parameters:
  Position = (241.4, 399.9) = 14 42 33.62 -62 7 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.3 +/- 29.0
  Background counts = 170.6
  Rate = 0.008 +/- 0.0009

[Sat Dec 31 13:34:39 2011] Off-axis axis estimate = 8.44'
[Sat Dec 31 13:48:37 2011] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 13:48:37 2011] Initial guess for spatial extent in simple fitting = 10.65"
[Sat Dec 31 13:48:37 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Sat Dec 31 13:48:37 2011] Giving source the simple spatial ID 82 for pass 0, mean size = 10.65"
[Sun Jan  1 01:12:21 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src82.ximg exists
[Sun Jan  1 01:12:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src82.csv
[Sun Jan  1 01:12:21 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src82_1.ximg exists
[Sun Jan  1 01:12:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src82.csv
[Sun Jan  1 01:12:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 01:12:24 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Sun Jan  1 01:12:24 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Sun Jan  1 01:12:24 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Sun Jan  1 23:37:48 2012] Source 87 is offset by -0.195681 and -9.230773 pixels which is larger than
2 X fitted extent = 1.256271 x 1.256271, not incorporating fit results
[Sun Jan  1 23:37:48 2012] Warning, spatial fit 82 centroid is now closest to src. 15
[Sun Jan  1 23:37:48 2012] Spatial fit model total counts = 4234.560000, observed total counts = 4236.000000
[Sun Jan  1 23:37:48 2012] Offset between fit and detection position for source 87 = 3.139927 pixels
[Sun Jan  1 23:37:48 2012] Warning, changing simple spatial fit ID from 82 to 95
[Sun Jan  1 23:37:48 2012] 4096.780000 total counts/ 3460.180000 bgd. counts: snr = 10.822243
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 3.139927 pixels
  Position = (241.8, 396.8) = 14 42 33.38 -62 7 33.3
  Extent = 20.4 (20.4-40.9)", rotation angle = 0
  Source counts = 636.6 +/- 64.0
  Background counts = 3460.2
  Rate = 0.01 +/- 0.001
[Sun Jan  1 23:37:48 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:37:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:37:48 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:37:48 2012] Source does appear to be extended
[Sun Jan  1 23:37:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:37:48 2012] Source is confused with source 15
[Sun Jan  1 23:39:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:39:59 2012] Initial guess for spatial extent in simple fitting = 20.43"
[Sun Jan  1 23:39:59 2012] source mask rpix=4.7, npix_max = 107, mask sum = 90, frac = 0.833
[Sun Jan  1 23:39:59 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 20.43"
[Mon Jan  2 15:34:16 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src79.ximg exists
[Mon Jan  2 15:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src79.csv
[Mon Jan  2 15:34:16 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src79_1.ximg exists
[Mon Jan  2 15:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src79.csv
[Mon Jan  2 15:34:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 15:34:18 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Mon Jan  2 15:34:18 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Mon Jan  2 15:34:18 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Tue Jan  3 21:35:38 2012] Spatial fit model total counts = 2666.500000, observed total counts = 2669.000000
[Tue Jan  3 21:35:38 2012] Offset between fit and detection position for source 87 = 2.325077 pixels
[Tue Jan  3 21:35:38 2012] Warning, changing simple spatial fit ID from 79 to 15
[Tue Jan  3 21:35:38 2012] 972.235000 total counts/ 598.931000 bgd. counts: snr = 15.253667
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 2.325077 pixels
  Position = (242.2, 394.5) = 14 42 33.13 -62 7 43.3
  Extent = 11.3 (9.1-15.0)", rotation angle = 0
  Source counts = 373.3 +/- 31.2
  Background counts = 598.9
  Rate = 0.006 +/- 0.0005
[Tue Jan  3 21:35:39 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:35:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:35:39 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:35:39 2012] Source does appear to be extended
[Tue Jan  3 21:35:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 21:37:31 2012] XMMSAS src. selection expression = ellipse(21022.598000, 34272.846000, 680.508020, 680.508020, 0.000000, X, Y)
[Tue Jan  3 21:37:31 2012] Writing source region out to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src87_src.reg
[Tue Jan  3 21:37:31 2012] Extracting stamp from image fullrun_pn_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (203, 355) - (281, 434)
[Tue Jan  3 21:37:32 2012] XMMSAS bgd. selection expression = annulus(21022.598000, 34272.846000, 1134.180033, 2268.360065, X, Y) && !ellipse(19022.813065, 34499.471344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19449.338380, 34524.164000, 1748.696050, 732.360821, 6.390220, X, Y) && !ellipse(20475.418091, 34693.686737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17789.454000, 34193.062000, 1804.184052, 1804.184052, 0.000000, X, Y) && !ellipse(18651.676000, 34412.409000, 1050.328030, 1050.328030, 0.000000, X, Y) && !ellipse(21824.161026, 33145.355957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.628000, 33383.392000, 1506.112043, 1506.112043, 0.000000, X, Y) && !ellipse(21133.647200, 32751.275000, 872.960025, 872.960025, 0.000000, X, Y) && !ellipse(23014.310000, 33129.466000, 2934.288084, 1815.088052, 0.000000, X, Y) && !ellipse(20789.288000, 32724.366400, 1745.920050, 1745.920050, 0.000000, X, Y) && !ellipse(24128.374664, 34465.508209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21144.402000, 34921.058000, 3032.112087, 3032.112087, 0.000000, X, Y) && !ellipse(23245.054000, 33984.434000, 1251.152036, 1251.152036, 0.000000, X, Y) && !ellipse(21880.501800, 34428.547000, 1158.584033, 1158.584033, 0.000000, X, Y) && !ellipse(20431.740204, 33864.807831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21667.814000, 33934.582000, 1516.056044, 1516.056044, 0.000000, X, Y) && !ellipse(24039.662170, 32415.477783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22886.601532, 31933.651031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.710000, 31369.334800, 1411.040041, 869.648025, 39.671000, X, Y) && !ellipse(19154.198517, 33819.390900, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 21:37:32 2012] Writing fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src87.gif
[Wed Jan  4 03:02:24 2012] Mean detx,y = (1140.42, -8002.94) 
[Wed Jan  4 03:02:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 03:02:57 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 03:02:57 2012] Setting source spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed Jan  4 03:02:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Fri Jan  6 08:06:43 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:06:43 2012] Error reading totcts from fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Fri Jan  6 08:06:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:06:54 2012] Using photon index=1.80, rate=0.00615, arf fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src87.arf
[Fri Jan  6 08:06:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:06:54 2012] Updating source flux to 2.5e-14
[Fri Jan  6 08:28:11 2012] Flag b found in src. 87 procflags, skipping spectral fitting
[Fri Jan  6 08:28:11 2012] Flag c found in src. 87 procflags, skipping spectral fitting