[Sat Dec 31 13:34:32 2011] Detection parameters:
  Position = (401.2, 295.4) = 14 40 54.24 -62 14 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2142.4 +/- 61.7
  Background counts = 277.9
  Rate = 0.03 +/- 0.0009

[Sat Dec 31 13:34:39 2011] Off-axis axis estimate = 7.45'
[Sat Dec 31 13:48:37 2011] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 13:48:37 2011] Initial guess for spatial extent in simple fitting = 10.16"
[Sat Dec 31 13:48:37 2011] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.747
[Sat Dec 31 13:48:37 2011] Giving source the simple spatial ID 60 for pass 0, mean size = 10.16"
[Sun Jan  1 01:12:20 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src60.ximg exists
[Sun Jan  1 01:12:20 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src60_1.ximg exists
[Sun Jan  1 01:12:20 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src60 appears to have run properly
[Sun Jan  1 01:12:23 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sun Jan  1 01:12:23 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sun Jan  1 01:12:23 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Sun Jan  1 23:37:48 2012] Spatial fit model total counts = 6008.680000, observed total counts = 6011.000000
[Sun Jan  1 23:37:48 2012] Offset between fit and detection position for source 64 = 6.872773 pixels
[Sun Jan  1 23:37:48 2012] Warning, changing simple spatial fit ID from 60 to 54
[Sun Jan  1 23:37:48 2012] 5847.132000 total counts/ 5242.380000 bgd. counts: snr = 8.352434
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 6.872773 pixels
  Position = (401.0, 302.2) = 14 40 54.38 -62 14 23.9
  Extent = 20.4 (20.4-40.8)", rotation angle = 0
  Source counts = 604.8 +/- 76.5
  Background counts = 5242.4
  Rate = 0.01 +/- 0.001
[Sun Jan  1 23:37:48 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:37:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:37:48 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:37:48 2012] Source does appear to be extended
[Sun Jan  1 23:37:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:37:48 2012] Source is confused with source 58
[Sun Jan  1 23:39:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:39:59 2012] Initial guess for spatial extent in simple fitting = 20.42"
[Sun Jan  1 23:39:59 2012] source mask rpix=4.7, npix_max = 107, mask sum = 99, frac = 0.918
[Sun Jan  1 23:39:59 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 20.42"
[Mon Jan  2 15:34:15 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src57.ximg exists
[Mon Jan  2 15:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src57.csv
[Mon Jan  2 15:34:15 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src57_1.ximg exists
[Mon Jan  2 15:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src57.csv
[Mon Jan  2 15:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 15:34:17 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Mon Jan  2 15:34:17 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Mon Jan  2 15:34:17 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Tue Jan  3 21:35:39 2012] Spatial fit model total counts = 6013.160000, observed total counts = 6011.000000
[Tue Jan  3 21:35:39 2012] Offset between fit and detection position for source 64 = 1.197362 pixels
[Tue Jan  3 21:35:39 2012] Warning, changing simple spatial fit ID from 57 to 52
[Tue Jan  3 21:35:39 2012] 5661.190000 total counts/ 5099.830000 bgd. counts: snr = 7.860743
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 1.197362 pixels
  Position = (401.4, 303.4) = 14 40 54.14 -62 14 19.0
  Extent = 20.4 (20.1-40.8)", rotation angle = 0
  Source counts = 561.4 +/- 75.2
  Background counts = 5099.8
  Rate = 0.009 +/- 0.001
[Tue Jan  3 21:35:39 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:35:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:35:39 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:35:39 2012] Source does appear to be extended
[Tue Jan  3 21:35:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 21:37:29 2012] XMMSAS src. selection expression = ellipse(34871.957400, 26345.396000, 1225.038035, 1225.038035, 0.000000, X, Y)
[Tue Jan  3 21:37:29 2012] Writing source region out to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src64_src.reg
[Tue Jan  3 21:37:29 2012] Extracting stamp from image fullrun_pn_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (331, 233) - (472, 374)
[Tue Jan  3 21:37:29 2012] XMMSAS bgd. selection expression = annulus(34871.957400, 26345.396000, 2041.730059, 4083.460118, X, Y) && !ellipse(32941.072000, 25905.182000, 1473.872042, 1473.872042, 0.000000, X, Y) && !ellipse(30279.294000, 26547.021400, 1345.416039, 1345.416039, 0.000000, X, Y) && !ellipse(32420.952454, 28650.338257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30409.770416, 28197.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30847.098877, 27755.917297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34922.887451, 26997.749786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36893.102000, 24695.512000, 2599.960075, 2599.960075, 0.000000, X, Y) && !ellipse(37913.572000, 24248.820000, 1821.376052, 763.224022, 33.272200, X, Y) && !ellipse(33602.368500, 25709.304400, 1541.928044, 865.024025, 40.519000, X, Y) && !ellipse(38174.884000, 24084.062000, 1892.384054, 1892.384054, 0.000000, X, Y) && !ellipse(35705.730000, 25282.916000, 10600.992305, 4246.392122, 33.823100, X, Y) && !ellipse(38698.884000, 23579.138000, 1859.120053, 1859.120053, 0.000000, X, Y) && !ellipse(33730.407593, 31015.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34526.950897, 30464.631287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30611.295105, 29263.296906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31963.798000, 29062.844000, 1499.032043, 1499.032043, 0.000000, X, Y) && !ellipse(33529.052826, 28742.074829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30185.316000, 28908.798000, 1364.592039, 1364.592039, 0.000000, X, Y) && !ellipse(30600.316559, 28649.629364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34570.203979, 28301.178009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35081.209503, 28215.173645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33006.635986, 28479.834930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31199.431885, 28638.711884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35122.864258, 27797.123352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34293.305664, 27787.405945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33789.649261, 27701.122803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32746.599762, 27841.799530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32205.799500, 27482.563446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34189.788727, 21789.165085, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 21:37:29 2012] Writing fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src64.gif
[Wed Jan  4 01:37:13 2012] Mean detx,y = (5589.00, 7354.21) 
[Wed Jan  4 01:37:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 01:37:52 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 01:37:53 2012] Setting source spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Wed Jan  4 01:37:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Fri Jan  6 08:06:41 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:06:41 2012] Error reading totcts from fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Fri Jan  6 08:06:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:06:53 2012] Using photon index=1.80, rate=0.00925, arf fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src64.arf
[Fri Jan  6 08:06:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:06:53 2012] Updating source flux to 3.3e-14
[Fri Jan  6 08:28:11 2012] Flag c found in src. 64 procflags, skipping spectral fitting