[Sat Dec 31 13:34:31 2011] Detection parameters:
  Position = (217.0, 338.9) = 14 42 48.90 -62 11 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1460.5 +/- 59.0
  Background counts = 447.7
  Rate = 0.04 +/- 0.002

[Sat Dec 31 13:34:39 2011] Off-axis axis estimate = 6.60'
[Sat Dec 31 13:48:37 2011] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 13:48:37 2011] Initial guess for spatial extent in simple fitting = 9.73"
[Sat Dec 31 13:48:37 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.202
[Sat Dec 31 13:48:37 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 9.73"
[Sun Jan  1 01:12:19 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src35.ximg exists
[Sun Jan  1 01:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src35.csv
[Sun Jan  1 01:12:19 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src35_1.ximg exists
[Sun Jan  1 01:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src35.csv
[Sun Jan  1 01:12:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 01:12:23 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sun Jan  1 01:12:23 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sun Jan  1 01:12:23 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Sun Jan  1 23:37:48 2012] Spatial fit model total counts = 10762.100000, observed total counts = 10756.000000
[Sun Jan  1 23:37:48 2012] Offset between fit and detection position for source 39 = 5.025247 pixels
[Sun Jan  1 23:37:48 2012] 9781.230000 total counts/ 4326.580000 bgd. counts: snr = 82.926726
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 5.025247 pixels
  Position = (221.8, 337.6) = 14 42 45.89 -62 11 50.5
  Extent = 19.5 (19.4-38.9)", rotation angle = 0
  Source counts = 5454.6 +/- 98.9
  Background counts = 4326.6
  Rate = 0.09 +/- 0.002
[Sun Jan  1 23:37:48 2012] Spatial fit model total counts = 10547.700000, observed total counts = 10544.000000
[Sun Jan  1 23:37:48 2012] Offset between fit and detection position for source 39 = 3.074736 pixels
[Sun Jan  1 23:37:48 2012] Warning, changing simple spatial fit ID from 35 to 44
[Sun Jan  1 23:37:48 2012] 10505.210000 total counts/ 3564.200000 bgd. counts: snr = 116.263030
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 3.074736 pixels
  Position = (224.6, 336.4) = 14 42 44.14 -62 11 55.8
  Extent = 18.6 (18.6-37.3)", rotation angle = 0
  Source counts = 6941.0 +/- 102.5
  Background counts = 3564.2
  Rate = 0.1 +/- 0.002
[Sun Jan  1 23:37:48 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:37:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:37:48 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:37:48 2012] Source does appear to be extended
[Sun Jan  1 23:37:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:37:48 2012] Source is confused with source 44
[Sun Jan  1 23:37:48 2012] Source is confused with source 48
[Sun Jan  1 23:39:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:39:59 2012] Initial guess for spatial extent in simple fitting = 18.63"
[Sun Jan  1 23:39:59 2012] source mask rpix=4.3, npix_max = 91, mask sum = 78, frac = 0.852
[Sun Jan  1 23:39:59 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 18.63"
[Mon Jan  2 15:34:15 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src33.ximg exists
[Mon Jan  2 15:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src33.csv
[Mon Jan  2 15:34:15 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Jan  2 15:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src33.csv
[Mon Jan  2 15:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 15:34:17 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Jan  2 15:34:17 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Jan  2 15:34:17 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Jan  3 21:35:39 2012] Warning, spatial fit 33 centroid is now closest to src. 170
[Tue Jan  3 21:35:39 2012] Spatial fit model total counts = 21849.300000, observed total counts = 21834.000000
[Tue Jan  3 21:35:39 2012] Offset between fit and detection position for source 39 = 4.533723 pixels
[Tue Jan  3 21:35:39 2012] Warning, changing simple spatial fit ID from 33 to 38
[Tue Jan  3 21:35:39 2012] 21335.616000 total counts/ 154.816000 bgd. counts: snr = 1702.293490
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 4.533723 pixels
  Position = (220.2, 337.2) = 14 42 46.91 -62 11 52.2
  Extent = 40.0 (39.9-80.0)", rotation angle = 0
  Source counts = 21180.8 +/- 146.1
  Background counts = 154.8
  Rate = 0.3 +/- 0.002
[Tue Jan  3 21:35:39 2012] Spatial fit model total counts = 10544.000000, observed total counts = 10544.000000
[Tue Jan  3 21:35:39 2012] Offset between fit and detection position for source 39 = 4.512352 pixels
[Tue Jan  3 21:35:39 2012] Warning, changing simple spatial fit ID from 38 to 42
[Tue Jan  3 21:35:39 2012] 2036.579000 total counts/ 459.869000 bgd. counts: snr = 73.524953
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 4.512352 pixels
  Position = (220.2, 341.7) = 14 42 46.89 -62 11 32.5
  Extent = 13.8 (12.3-16.1)", rotation angle = 0
  Source counts = 1576.7 +/- 45.1
  Background counts = 459.9
  Rate = 0.03 +/- 0.0007
[Tue Jan  3 21:35:39 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:35:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:35:39 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:35:39 2012] Source does appear to be extended
[Tue Jan  3 21:35:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 21:37:26 2012] Counts = 1576.710000, rescaling region sizes by 2.000000
[Tue Jan  3 21:37:26 2012] XMMSAS src. selection expression = ellipse(19107.270000, 29681.856000, 1658.652048, 1658.652048, 0.000000, X, Y)
[Tue Jan  3 21:37:26 2012] Writing source region out to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src39_src.reg
[Tue Jan  3 21:37:26 2012] Extracting stamp from image fullrun_pn_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (125, 246) - (316, 437)
[Tue Jan  3 21:37:27 2012] XMMSAS bgd. selection expression = annulus(19107.270000, 29681.856000, 5528.840159, 11057.680318, X, Y) && !ellipse(25295.720000, 28023.738200, 3486.240100, 3486.240100, 0.000000, X, Y) && !ellipse(27530.428000, 27182.428000, 532.314415, 532.314415, 0.000000, X, Y) && !ellipse(24313.098328, 28502.227448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29131.248963, 26664.482503, 1156.544033, 634.810552, 10.337808, X, Y) && !ellipse(30279.294000, 26547.021400, 1345.416039, 1345.416039, 0.000000, X, Y) && !ellipse(14492.229919, 29133.707581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23479.924000, 28612.582600, 1290.280037, 1290.280037, 0.000000, X, Y) && !ellipse(8256.542000, 28812.526000, 1696.440049, 1696.440049, 0.000000, X, Y) && !ellipse(8750.265460, 29463.681400, 689.519220, 689.519220, 0.000000, X, Y) && !ellipse(19022.813065, 34499.471344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19449.338380, 34524.164000, 1748.696050, 732.360821, 6.390220, X, Y) && !ellipse(20475.418091, 34693.686737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17789.454000, 34193.062000, 1804.184052, 1804.184052, 0.000000, X, Y) && !ellipse(26162.071350, 33518.477844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18651.676000, 34412.409000, 1050.328030, 1050.328030, 0.000000, X, Y) && !ellipse(21824.161026, 33145.355957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25956.408400, 33328.032000, 1535.704044, 1535.704044, 0.000000, X, Y) && !ellipse(30594.428000, 33235.850000, 531.182415, 531.182415, 0.000000, X, Y) && !ellipse(23957.628000, 33383.392000, 1506.112043, 1506.112043, 0.000000, X, Y) && !ellipse(24392.082794, 32914.766663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21133.647200, 32751.275000, 872.960025, 872.960025, 0.000000, X, Y) && !ellipse(23014.310000, 33129.466000, 2934.288084, 1815.088052, 0.000000, X, Y) && !ellipse(20789.288000, 32724.366400, 1745.920050, 1745.920050, 0.000000, X, Y) && !ellipse(24675.634000, 32546.184000, 1023.952029, 1023.952029, 0.000000, X, Y) && !ellipse(14216.254000, 31648.866000, 1313.168038, 533.185615, 40.639022, X, Y) && !ellipse(13533.102824, 30981.543354, 1908.080055, 768.379065, 60.533756, X, Y) && !ellipse(28535.086000, 30401.176000, 700.675576, 700.675576, 0.000000, X, Y) && !ellipse(27919.034332, 29685.143890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14847.080000, 29452.732000, 1762.864051, 1762.864051, 0.000000, X, Y) && !ellipse(7601.984177, 29359.637299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26497.667053, 29508.308319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21897.138000, 29390.088000, 1339.744039, 1339.744039, 0.000000, X, Y) && !ellipse(15863.514000, 28648.872000, 1762.864051, 1762.864051, 0.000000, X, Y) && !ellipse(18360.562000, 29499.598400, 1599.720046, 1599.720046, 0.000000, X, Y) && !ellipse(16859.134000, 28794.272000, 706.457620, 706.457620, 0.000000, X, Y) && !ellipse(7509.101560, 29020.932000, 1572.626231, 879.210100, 79.264134, X, Y) && !ellipse(19783.785614, 29142.830261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12834.326000, 29302.242000, 830.608024, 830.608024, 0.000000, X, Y) && !ellipse(30409.770416, 28197.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16418.382000, 28156.414000, 680.903220, 680.903220, 0.000000, X, Y) && !ellipse(6410.208000, 28059.942000, 1743.328050, 1743.328050, 0.000000, X, Y) && !ellipse(30847.098877, 27755.917297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28137.067993, 27690.470825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7896.028671, 28166.945038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7512.692000, 27190.784000, 2287.440066, 2287.440066, 0.000000, X, Y) && !ellipse(6078.454000, 26420.610000, 2332.176067, 2332.176067, 0.000000, X, Y) && !ellipse(22433.549988, 26504.609955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(5888.046000, 25993.704000, 2331.464067, 2331.464067, 0.000000, X, Y) && !ellipse(35705.730000, 25282.916000, 10600.992305, 4246.392122, 33.823100, X, Y) && !ellipse(17057.560379, 23261.483704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13842.270782, 22049.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11000.087807, 20642.557495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19780.862427, 20234.415771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10622.484000, 19940.506000, 1873.704054, 1323.568038, 119.998246, X, Y) && !ellipse(10312.086082, 19699.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10500.586525, 18830.697800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10578.136051, 19530.167208, 1585.984046, 1525.541212, 90.000000, X, Y) && !ellipse(9915.734000, 18573.686000, 2159.576062, 2159.576062, 0.000000, X, Y) && !ellipse(26781.295868, 23171.661407, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26731.304321, 40690.561584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21022.598000, 34272.846000, 907.344026, 907.344026, 0.000000, X, Y) && !ellipse(24128.374664, 34465.508209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26504.509064, 34213.569824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21144.402000, 34921.058000, 3032.112087, 3032.112087, 0.000000, X, Y) && !ellipse(28753.403839, 34040.515015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25435.870392, 34132.809143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23245.054000, 33984.434000, 1251.152036, 1251.152036, 0.000000, X, Y) && !ellipse(21880.501800, 34428.547000, 1158.584033, 1158.584033, 0.000000, X, Y) && !ellipse(28507.294000, 34044.586000, 1574.664045, 1574.664045, 0.000000, X, Y) && !ellipse(27107.448000, 33483.310000, 1558.528045, 1558.528045, 0.000000, X, Y) && !ellipse(20431.740204, 33864.807831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21667.814000, 33934.582000, 1516.056044, 1516.056044, 0.000000, X, Y) && !ellipse(29830.067800, 33848.861200, 1590.672046, 817.648024, 132.156000, X, Y) && !ellipse(15794.930664, 32542.364288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25488.834600, 33357.298000, 899.120026, 899.120026, 0.000000, X, Y) && !ellipse(24039.662170, 32415.477783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22886.601532, 31933.651031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.893799, 31573.469757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25464.078000, 31344.698380, 1389.304040, 1389.304040, 0.000000, X, Y) && !ellipse(23831.710000, 31369.334800, 1411.040041, 869.648025, 39.671000, X, Y) && !ellipse(16218.000290, 30461.795715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15640.774000, 30404.910000, 1119.688032, 1119.688032, 0.000000, X, Y) && !ellipse(25445.999329, 29525.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27118.686371, 29615.884796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30611.295105, 29263.296906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29531.922150, 29514.850311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30185.316000, 28908.798000, 1364.592039, 1364.592039, 0.000000, X, Y) && !ellipse(30600.316559, 28649.629364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28512.324000, 28400.572000, 1218.144035, 1218.144035, 0.000000, X, Y) && !ellipse(24718.468201, 26658.248535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21398.092545, 26407.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20649.100815, 22465.726288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11709.005188, 21604.134766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11356.015060, 21419.125687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10625.619156, 20822.569809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27728.074005, 20454.730103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18359.042465, 18228.591583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30053.733643, 41127.008575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18800.453033, 38762.086365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.628723, 35289.894806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25514.422089, 34744.573029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26184.956000, 34692.798000, 1583.168046, 1583.168046, 0.000000, X, Y) && !ellipse(30008.956573, 34127.151276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19154.198517, 33819.390900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30706.050446, 32661.113129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26220.216458, 32322.404000, 1405.808040, 444.276399, 51.195038, X, Y) && !ellipse(30733.163605, 32238.275818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24560.239075, 31986.435669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.734000, 30091.004000, 921.984027, 921.984027, 0.000000, X, Y) && !ellipse(27382.466187, 29094.235260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20531.918442, 27407.574799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20824.607544, 26361.044556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24812.586334, 26174.956207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15025.438126, 24054.461304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20279.275146, 21593.592972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30677.421265, 21169.961807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27741.986359, 21002.185196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29899.009155, 21074.062149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27627.947540, 19274.375763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.834106, 19432.338058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27731.958313, 18491.653214, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 21:37:27 2012] Writing fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src39.gif
[Wed Jan  4 00:04:44 2012] Mean detx,y = (-3781.62, -5780.96) 
[Wed Jan  4 00:04:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 00:09:11 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 00:09:12 2012] Setting source spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Jan  4 00:09:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Fri Jan  6 08:06:39 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:06:39 2012] Error reading totcts from fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Fri Jan  6 08:06:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:06:52 2012] Using photon index=1.80, rate=0.026, arf fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src39.arf
[Fri Jan  6 08:06:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:06:52 2012] Updating source flux to 8.7e-14
[Fri Jan  6 08:28:11 2012] Flag c found in src. 39 procflags, skipping spectral fitting