[Sat Dec 31 13:34:31 2011] Detection parameters:
  Position = (77.6, 340.0) = 14 44 15.52 -62 11 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.2 +/- 27.5
  Background counts = 207.0
  Rate = 0.003 +/- 0.0004

[Sat Dec 31 13:34:39 2011] Off-axis axis estimate = 16.29'
[Sat Dec 31 13:48:37 2011] Using EEF radius (= 14.57 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 13:48:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 31 13:48:37 2011] Initial guess for spatial extent in simple fitting = 14.57"
[Sat Dec 31 13:48:37 2011] source mask rpix=3.4, npix_max = 59, mask sum = 42, frac = 0.708
[Sat Dec 31 13:48:37 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 14.57"
[Sun Jan  1 01:12:19 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src34.ximg exists
[Sun Jan  1 01:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src34.csv
[Sun Jan  1 01:12:19 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun Jan  1 01:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src34.csv
[Sun Jan  1 01:12:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 01:12:23 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun Jan  1 01:12:23 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun Jan  1 01:12:23 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Sun Jan  1 23:37:48 2012] Warning, spatial fit 34 centroid is now closest to src. 46
[Sun Jan  1 23:37:48 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:37:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:37:48 2012] Assessing source extent using major
[Sun Jan  1 23:37:48 2012] Source does appear to be extended
[Sun Jan  1 23:37:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:37:48 2012] Source is confused with source 47
[Sun Jan  1 23:39:59 2012] Using EEF radius (= 14.57 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:39:59 2012] Initial guess for spatial extent in simple fitting = 14.57"
[Sun Jan  1 23:39:59 2012] source mask rpix=3.4, npix_max = 59, mask sum = 42, frac = 0.708
[Sun Jan  1 23:39:59 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 14.57"
[Mon Jan  2 15:34:15 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src32.ximg exists
[Mon Jan  2 15:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src32.csv
[Mon Jan  2 15:34:15 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src32_1.ximg exists
[Mon Jan  2 15:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src32.csv
[Mon Jan  2 15:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 15:34:17 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Mon Jan  2 15:34:17 2012] fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Mon Jan  2 15:34:17 2012] Fit fullrun_pn_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Tue Jan  3 21:35:39 2012] Warning, spatial fit 32 centroid is now closest to src. 46
[Tue Jan  3 21:35:39 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 15.710156 pixels away
[Tue Jan  3 21:35:39 2012] Source 38 is offset by 7.058269 and 7.006964 pixels which is larger than
2 X fitted extent = 6.205288 x 6.205288, not incorporating fit results
[Tue Jan  3 21:35:39 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:35:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:35:39 2012] Assessing source extent using major
[Tue Jan  3 21:35:39 2012] Source does appear to be extended
[Tue Jan  3 21:35:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 21:37:26 2012] XMMSAS src. selection expression = ellipse(6703.101440, 29531.377869, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan  3 21:37:26 2012] Writing source region out to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src38_src.reg
[Tue Jan  3 21:37:26 2012] Extracting stamp from image fullrun_pn_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (40, 302) - (115, 377)
[Tue Jan  3 21:37:26 2012] XMMSAS bgd. selection expression = annulus(6703.101440, 29531.377869, 1087.500000, 2175.000000, X, Y) && !ellipse(8256.542000, 28812.526000, 1696.440049, 1696.440049, 0.000000, X, Y) && !ellipse(8750.265460, 29463.681400, 689.519220, 689.519220, 0.000000, X, Y) && !ellipse(7601.984177, 29359.637299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(6099.000000, 28999.570000, 769.603222, 769.603222, 0.000000, X, Y) && !ellipse(7509.101560, 29020.932000, 1572.626231, 879.210100, 79.264134, X, Y) && !ellipse(6410.208000, 28059.942000, 1743.328050, 1743.328050, 0.000000, X, Y) && !ellipse(7896.028671, 28166.945038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7512.692000, 27190.784000, 2287.440066, 2287.440066, 0.000000, X, Y) && !ellipse(6078.454000, 26420.610000, 2332.176067, 2332.176067, 0.000000, X, Y) && !ellipse(5888.046000, 25993.704000, 2331.464067, 2331.464067, 0.000000, X, Y) && !ellipse(6379.090958, 26747.757538, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 21:37:26 2012] Writing fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src38.gif
[Wed Jan  4 00:03:11 2012] Mean detx,y = (-12581.82, -14196.98) 
[Wed Jan  4 00:03:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 00:03:46 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 00:03:47 2012] Setting source spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Jan  4 00:03:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Wed Jan  4 19:43:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan  4 19:43:56 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:06:39 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:06:39 2012] Error reading totcts from fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jan  6 08:06:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:06:52 2012] Using photon index=1.80, rate=0.00334, arf fullrun_pn_xmm0504810301_pi300-10000_pass1_cl_src38.arf
[Fri Jan  6 08:06:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:06:52 2012] Updating source flux to 8.9e-14
[Fri Jan  6 08:28:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting