[Sat Dec 31 13:38:02 2011] Detection parameters:
  Position = (358.2, 382.4) = 14 41 21.16 -62 8 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.9 +/- 21.0
  Background counts = 74.1
  Rate = 0.004 +/- 0.0004

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 7.47'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.839
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 10.17"
[Sun Jan  1 23:37:00 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src54.ximg exists
[Sun Jan  1 23:37:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src54.csv
[Sun Jan  1 23:37:00 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun Jan  1 23:37:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src54.csv
[Sun Jan  1 23:37:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:04 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun Jan  1 23:37:04 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun Jan  1 23:37:04 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Sun Jan  1 23:38:53 2012] Warning, spatial fit 54 centroid is now closest to src. 79
[Sun Jan  1 23:38:53 2012] Spatial fit model total counts = 993.221000, observed total counts = 989.000000
[Sun Jan  1 23:38:53 2012] Offset between fit and detection position for source 86 = 1.570078 pixels
[Sun Jan  1 23:38:53 2012] Warning, changing simple spatial fit ID from 54 to 68
[Sun Jan  1 23:38:53 2012] 960.357000 total counts/ 411.039000 bgd. counts: snr = 27.094573
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 1.570078 pixels
  Position = (357.6, 381.0) = 14 41 21.53 -62 8 42.0
  Extent = 20.3 (20.2-40.5)", rotation angle = 0
  Source counts = 549.3 +/- 31.0
  Background counts = 411.0
  Rate = 0.008 +/- 0.0004
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 79
[Sun Jan  1 23:38:54 2012] Source is confused with source 94
[Sun Jan  1 23:38:54 2012] Source is confused with source 90
[Tue Jan  3 05:59:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 20.27"
[Tue Jan  3 05:59:05 2012] source mask rpix=4.7, npix_max = 106, mask sum = 90, frac = 0.845
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 20.27"
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src54.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src54.csv
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src54.csv
[Tue Jan  3 21:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:54 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Jan  3 21:34:54 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Jan  3 21:34:54 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Tue Jan  3 21:36:36 2012] Spatial fit model total counts = 2972.220000, observed total counts = 2972.000000
[Tue Jan  3 21:36:36 2012] Offset between fit and detection position for source 86 = 4.074418 pixels
[Tue Jan  3 21:36:36 2012] 2916.977000 total counts/ 2313.970000 bgd. counts: snr = 12.535553
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 4.074418 pixels
  Position = (361.4, 379.6) = 14 41 19.16 -62 8 48.1
  Extent = 19.4 (16.9-22.8)", rotation angle = 0
  Source counts = 603.0 +/- 54.0
  Background counts = 2314.0
  Rate = 0.008 +/- 0.0008
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:40 2012] XMMSAS src. selection expression = ellipse(31393.230000, 32974.538000, 1165.248034, 1165.248034, 0.000000, X, Y)
[Thu Jan  5 18:24:40 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src86_src.reg
[Thu Jan  5 18:24:40 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (294, 313) - (428, 447)
[Thu Jan  5 18:24:41 2012] XMMSAS bgd. selection expression = annulus(31393.230000, 32974.538000, 1942.080056, 3884.160112, X, Y) && !ellipse(26659.606000, 28126.014000, 1216.096035, 463.824013, 46.497000, X, Y) && !ellipse(33251.571800, 28512.889800, 1539.640044, 1539.640044, 0.000000, X, Y) && !ellipse(34777.466187, 35507.081512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32087.602000, 29001.582000, 1503.800043, 1503.800043, 0.000000, X, Y) && !ellipse(26781.717000, 33501.330000, 1544.448044, 1544.448044, 0.000000, X, Y) && !ellipse(32722.004000, 28434.642000, 2995.168086, 2995.168086, 0.000000, X, Y) && !ellipse(27870.406000, 27862.402000, 1250.192036, 1250.192036, 0.000000, X, Y) && !ellipse(31534.762000, 28899.991200, 1461.688042, 1461.688042, 0.000000, X, Y) && !ellipse(28627.037000, 34122.613400, 1532.224044, 278.941608, 49.781788, X, Y) && !ellipse(30950.289246, 28830.755463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30003.293396, 34150.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31161.345490, 32599.606720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.734833, 28479.688904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29766.305000, 28336.800000, 1367.144039, 1367.144039, 0.000000, X, Y) && !ellipse(30723.233795, 29466.417267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31148.553558, 31442.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29597.193390, 33758.609314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33446.115021, 31325.630737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.044000, 33797.660000, 3088.896089, 3088.896089, 0.000000, X, Y) && !ellipse(29717.527283, 29507.286133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28960.113800, 29660.486633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.888306, 33626.070251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.868000, 29182.546000, 1216.096035, 1216.096035, 0.000000, X, Y) && !ellipse(28181.545044, 29863.094574, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:41 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src86.gif
[Thu Jan  5 22:12:55 2012] Mean detx,y = (-7536.70, -144.05) 
[Thu Jan  5 22:12:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 22:13:37 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 22:13:38 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Thu Jan  5 22:13:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Fri Jan  6 08:07:15 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:15 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Fri Jan  6 08:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:23 2012] Using photon index=1.80, rate=0.00839, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src86.arf
[Fri Jan  6 08:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:23 2012] Updating source flux to 1.1e-13
[Fri Jan  6 08:17:52 2012] Flag c found in src. 86 procflags, skipping spectral fitting