[Sat Dec 31 13:38:01 2011] Detection parameters:
  Position = (307.8, 386.9) = 14 41 52.46 -62 8 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.7 +/- 20.1
  Background counts = 83.5
  Rate = 0.003 +/- 0.0004

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 6.45'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 9.65"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 9.65"
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src80.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src80.csv
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src80_1.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src80.csv
[Sun Jan  1 23:37:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:05 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Sun Jan  1 23:37:05 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Sun Jan  1 23:37:05 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Sun Jan  1 23:38:54 2012] Spatial fit model total counts = 1365.130000, observed total counts = 1366.000000
[Sun Jan  1 23:38:54 2012] Offset between fit and detection position for source 81 = 1.415971 pixels
[Sun Jan  1 23:38:54 2012] 1356.496000 total counts/ 1008.060000 bgd. counts: snr = 10.974376
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 1.415971 pixels
  Position = (308.4, 385.6) = 14 41 52.06 -62 8 22.1
  Extent = 19.3 (19.3-38.6)", rotation angle = 0
  Source counts = 348.4 +/- 36.8
  Background counts = 1008.1
  Rate = 0.005 +/- 0.0005
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 82
[Sun Jan  1 23:38:54 2012] Source is confused with source 73
[Sun Jan  1 23:38:54 2012] Source is confused with source 80
[Tue Jan  3 05:59:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 19.31"
[Tue Jan  3 05:59:05 2012] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.025
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 19.31"
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src77.ximg exists
[Tue Jan  3 21:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src77.csv
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src77_1.ximg exists
[Tue Jan  3 21:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src77.csv
[Tue Jan  3 21:34:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Tue Jan  3 21:34:55 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Tue Jan  3 21:36:36 2012] Warning, spatial fit 77 centroid is now closest to src. 73
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:42 2012] XMMSAS src. selection expression = ellipse(26781.717000, 33501.330000, 1158.336033, 1158.336033, 0.000000, X, Y)
[Thu Jan  5 18:24:42 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src81_src.reg
[Thu Jan  5 18:24:42 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (242, 319) - (375, 452)
[Thu Jan  5 18:24:43 2012] XMMSAS bgd. selection expression = annulus(26781.717000, 33501.330000, 1930.560056, 3861.120111, X, Y) && !ellipse(23585.147086, 28645.893096, 2415.744070, 1310.044271, 18.816043, X, Y) && !ellipse(21927.096000, 28746.733504, 1333.944038, 639.304018, 204.235000, X, Y) && !ellipse(20588.772000, 29293.234000, 2813.232081, 2813.232081, 0.000000, X, Y) && !ellipse(23755.658200, 33372.695000, 582.836817, 582.836817, 0.000000, X, Y) && !ellipse(31393.230000, 32974.538000, 1553.664045, 1553.664045, 0.000000, X, Y) && !ellipse(24559.580600, 33585.568400, 1545.968044, 1545.968044, 0.000000, X, Y) && !ellipse(24804.037800, 32732.738620, 1486.456043, 1486.456043, 0.000000, X, Y) && !ellipse(22065.998000, 34203.116000, 1621.616047, 1621.616047, 0.000000, X, Y) && !ellipse(25328.906800, 33142.779000, 924.168027, 924.168027, 0.000000, X, Y) && !ellipse(22648.812000, 33160.031800, 1549.088045, 1549.088045, 0.000000, X, Y) && !ellipse(21095.012000, 34817.550000, 3243.232093, 3243.232093, 0.000000, X, Y) && !ellipse(32087.602000, 29001.582000, 1503.800043, 1503.800043, 0.000000, X, Y) && !ellipse(32722.004000, 28434.642000, 2995.168086, 2995.168086, 0.000000, X, Y) && !ellipse(31534.762000, 28899.991200, 1461.688042, 1461.688042, 0.000000, X, Y) && !ellipse(28627.037000, 34122.613400, 1532.224044, 278.941608, 49.781788, X, Y) && !ellipse(25949.964000, 29420.931000, 1270.880037, 1270.880037, 0.000000, X, Y) && !ellipse(30950.289246, 28830.755463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26195.880493, 33457.258179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30003.293396, 34150.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22654.251953, 34626.028625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31161.345490, 32599.606720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29766.305000, 28336.800000, 1367.144039, 1367.144039, 0.000000, X, Y) && !ellipse(25598.188263, 29281.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30723.233795, 29466.417267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31148.553558, 31442.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29597.193390, 33758.609314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.719635, 31671.079254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.044000, 33797.660000, 3088.896089, 3088.896089, 0.000000, X, Y) && !ellipse(25240.492096, 31434.980774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29717.527283, 29507.286133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28960.113800, 29660.486633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.888306, 33626.070251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.868000, 29182.546000, 1216.096035, 1216.096035, 0.000000, X, Y) && !ellipse(23843.204000, 32803.764000, 3098.176089, 3000.744086, 0.236000, X, Y) && !ellipse(28181.545044, 29863.094574, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:43 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src81.gif
[Thu Jan  5 22:46:43 2012] Mean detx,y = (-4564.73, 3402.28) 
[Thu Jan  5 22:46:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 22:47:59 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 22:47:59 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Thu Jan  5 22:47:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Fri Jan  6 08:07:16 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:16 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Fri Jan  6 08:07:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:24 2012] Using photon index=1.80, rate=0.00485, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src81.arf
[Fri Jan  6 08:07:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:24 2012] Updating source flux to 5.9e-14
[Fri Jan  6 08:17:52 2012] Flag c found in src. 81 procflags, skipping spectral fitting