[Sat Dec 31 13:38:01 2011] Detection parameters:
  Position = (281.1, 385.9) = 14 42 8.99 -62 8 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.6 +/- 24.0
  Background counts = 88.2
  Rate = 0.004 +/- 0.0004

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 6.47'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 9.66"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.215
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 9.66"
[Sun Jan  1 23:37:00 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src56.ximg exists
[Sun Jan  1 23:37:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src56.csv
[Sun Jan  1 23:37:00 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src56_1.ximg exists
[Sun Jan  1 23:37:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src56.csv
[Sun Jan  1 23:37:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:04 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sun Jan  1 23:37:04 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sun Jan  1 23:37:04 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Sun Jan  1 23:38:53 2012] Spatial fit model total counts = 1813.350000, observed total counts = 1816.000000
[Sun Jan  1 23:38:53 2012] Offset between fit and detection position for source 78 = 1.869407 pixels
[Sun Jan  1 23:38:53 2012] 1684.939000 total counts/ 1344.630000 bgd. counts: snr = 9.280514
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 1.869407 pixels
  Position = (282.9, 386.6) = 14 42 7.91 -62 8 17.9
  Extent = 19.3 (19.3-38.6)", rotation angle = 0
  Source counts = 340.3 +/- 41.0
  Background counts = 1344.6
  Rate = 0.005 +/- 0.0006
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 83
[Tue Jan  3 05:59:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 19.32"
[Tue Jan  3 05:59:05 2012] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.023
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 19.32"
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src56.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src56.csv
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src56_1.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src56.csv
[Tue Jan  3 21:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:54 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Tue Jan  3 21:34:54 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Tue Jan  3 21:34:54 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Tue Jan  3 21:36:36 2012] Warning, spatial fit 56 centroid is now closest to src. 100
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:41 2012] XMMSAS src. selection expression = ellipse(24559.580600, 33585.568400, 1159.476033, 1159.476033, 0.000000, X, Y)
[Thu Jan  5 18:24:41 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src78_src.reg
[Thu Jan  5 18:24:41 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (216, 320) - (349, 453)
[Thu Jan  5 18:24:41 2012] XMMSAS bgd. selection expression = annulus(24559.580600, 33585.568400, 1932.460056, 3864.920111, X, Y) && !ellipse(21326.090000, 28972.729000, 1464.824042, 1464.824042, 0.000000, X, Y) && !ellipse(23585.147086, 28645.893096, 2415.744070, 1310.044271, 18.816043, X, Y) && !ellipse(21927.096000, 28746.733504, 1333.944038, 639.304018, 204.235000, X, Y) && !ellipse(19885.256600, 29112.530000, 1494.552043, 1494.552043, 0.000000, X, Y) && !ellipse(20588.772000, 29293.234000, 2813.232081, 2813.232081, 0.000000, X, Y) && !ellipse(23755.658200, 33372.695000, 582.836817, 582.836817, 0.000000, X, Y) && !ellipse(24804.037800, 32732.738620, 1486.456043, 1486.456043, 0.000000, X, Y) && !ellipse(20655.780130, 32645.313800, 720.609621, 720.609621, 0.000000, X, Y) && !ellipse(22065.998000, 34203.116000, 1621.616047, 1621.616047, 0.000000, X, Y) && !ellipse(25328.906800, 33142.779000, 924.168027, 924.168027, 0.000000, X, Y) && !ellipse(22648.812000, 33160.031800, 1549.088045, 1549.088045, 0.000000, X, Y) && !ellipse(21647.962662, 33720.735321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21095.012000, 34817.550000, 3243.232093, 3243.232093, 0.000000, X, Y) && !ellipse(26781.717000, 33501.330000, 1544.448044, 1544.448044, 0.000000, X, Y) && !ellipse(28627.037000, 34122.613400, 1532.224044, 278.941608, 49.781788, X, Y) && !ellipse(25949.964000, 29420.931000, 1270.880037, 1270.880037, 0.000000, X, Y) && !ellipse(26195.880493, 33457.258179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22654.251953, 34626.028625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25598.188263, 29281.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.719635, 31671.079254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.044000, 33797.660000, 3088.896089, 3088.896089, 0.000000, X, Y) && !ellipse(25240.492096, 31434.980774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28960.113800, 29660.486633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.888306, 33626.070251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.868000, 29182.546000, 1216.096035, 1216.096035, 0.000000, X, Y) && !ellipse(23843.204000, 32803.764000, 3098.176089, 3000.744086, 0.236000, X, Y) && !ellipse(28181.545044, 29863.094574, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:41 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src78.gif
[Thu Jan  5 22:15:04 2012] Mean detx,y = (-2848.54, 4862.22) 
[Thu Jan  5 22:15:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 22:15:43 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 22:15:44 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Thu Jan  5 22:15:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Fri Jan  6 08:07:15 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:15 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Fri Jan  6 08:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:23 2012] Using photon index=1.80, rate=0.00474, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src78.arf
[Fri Jan  6 08:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:23 2012] Updating source flux to 5.9e-14
[Fri Jan  6 08:17:52 2012] Flag c found in src. 78 procflags, skipping spectral fitting