[Sat Dec 31 13:38:01 2011] Detection parameters:
  Position = (223.1, 396.7) = 14 42 44.96 -62 7 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.5 +/- 19.3
  Background counts = 75.7
  Rate = 0.004 +/- 0.0005

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 8.98'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.911
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 10.92"
[Sun Jan  1 23:37:00 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src57.ximg exists
[Sun Jan  1 23:37:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src57.csv
[Sun Jan  1 23:37:00 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src57_1.ximg exists
[Sun Jan  1 23:37:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src57.csv
[Sun Jan  1 23:37:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:04 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sun Jan  1 23:37:04 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sun Jan  1 23:37:04 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Sun Jan  1 23:38:53 2012] Warning, spatial fit 57 centroid is now closest to src. 12
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 12
[Tue Jan  3 05:59:05 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Tue Jan  3 05:59:05 2012] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.911
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 10.92"
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src57.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src57.csv
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src57_1.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src57.csv
[Tue Jan  3 21:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:54 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Tue Jan  3 21:34:54 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Tue Jan  3 21:34:54 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Tue Jan  3 21:36:35 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 14.763947 pixels away
[Tue Jan  3 21:36:36 2012] Warning, spatial fit 57 centroid is now closest to src. 12
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:41 2012] XMMSAS src. selection expression = ellipse(19362.324936, 34467.374695, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 18:24:41 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src69_src.reg
[Thu Jan  5 18:24:41 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (186, 359) - (261, 434)
[Thu Jan  5 18:24:41 2012] XMMSAS bgd. selection expression = annulus(19362.324936, 34467.374695, 1087.500000, 2175.000000, X, Y) && !ellipse(18624.110253, 34419.961514, 1764.384051, 609.940032, 359.456956, X, Y) && !ellipse(18064.766983, 34322.890656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18590.734924, 33988.577332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20655.780130, 32645.313800, 720.609621, 720.609621, 0.000000, X, Y) && !ellipse(22065.998000, 34203.116000, 1621.616047, 1621.616047, 0.000000, X, Y) && !ellipse(22648.812000, 33160.031800, 1549.088045, 1549.088045, 0.000000, X, Y) && !ellipse(21647.962662, 33720.735321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21095.012000, 34817.550000, 3243.232093, 3243.232093, 0.000000, X, Y) && !ellipse(17307.998672, 34390.705414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23843.204000, 32803.764000, 3098.176089, 3000.744086, 0.236000, X, Y)
[Thu Jan  5 18:24:41 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src69.gif
[Thu Jan  5 22:15:57 2012] Mean detx,y = (272.33, 9076.89) 
[Thu Jan  5 22:16:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 22:16:32 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 22:16:33 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Thu Jan  5 22:16:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Fri Jan  6 05:22:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 05:22:24 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:07:15 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:15 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Fri Jan  6 08:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:23 2012] Using photon index=1.80, rate=0.00391, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src69.arf
[Fri Jan  6 08:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:23 2012] Updating source flux to 2.7e-13
[Fri Jan  6 08:17:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting