[Sat Dec 31 13:38:00 2011] Detection parameters:
  Position = (125.3, 233.1) = 14 43 46.31 -62 19 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.8 +/- 18.9
  Background counts = 38.9
  Rate = 0.002 +/- 0.0003

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 13.41'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 13.14 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 13.14"
[Sun Jan  1 11:59:28 2012] source mask rpix=3.0, npix_max = 49, mask sum = 39, frac = 0.787
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 86 for pass 0, mean size = 13.14"
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src86.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src86.csv
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src86_1.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src86.csv
[Sun Jan  1 23:37:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:06 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Sun Jan  1 23:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sun Jan  1 23:37:06 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Sun Jan  1 23:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sun Jan  1 23:37:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:38:54 2012] Warning, spatial fit 86 centroid is now closest to src. 151
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 48
[Tue Jan  3 05:59:05 2012] Using EEF radius (= 13.14 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 13.14"
[Tue Jan  3 05:59:05 2012] source mask rpix=3.0, npix_max = 49, mask sum = 39, frac = 0.787
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 13.14"
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src83.ximg exists
[Tue Jan  3 21:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src83.csv
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src83_1.ximg exists
[Tue Jan  3 21:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src83.csv
[Tue Jan  3 21:34:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Tue Jan  3 21:34:55 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Tue Jan  3 21:36:36 2012] Warning, spatial fit 83 centroid is now closest to src. 143
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:43 2012] XMMSAS src. selection expression = ellipse(10855.915070, 20231.074417, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 18:24:43 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src49_src.reg
[Thu Jan  5 18:24:43 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (88, 196) - (163, 271)
[Thu Jan  5 18:24:43 2012] XMMSAS bgd. selection expression = annulus(10855.915070, 20231.074417, 1087.500000, 2175.000000, X, Y) && !ellipse(13799.646942, 21613.793762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11161.251404, 20740.173630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13156.958603, 21951.056824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11571.838409, 21306.196671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11099.095840, 21698.823730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13431.152771, 21193.749542, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:43 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src49.gif
[Thu Jan  5 23:12:24 2012] Mean detx,y = (15994.90, 4267.04) 
[Thu Jan  5 23:12:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 23:13:02 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 23:13:02 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Jan  5 23:13:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Fri Jan  6 06:32:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 06:32:44 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:07:17 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:17 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Jan  6 08:07:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:25 2012] Using photon index=1.80, rate=0.0023, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src49.arf
[Fri Jan  6 08:07:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:25 2012] Updating source flux to 1e-13
[Fri Jan  6 08:17:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting