[Sat Dec 31 13:37:59 2011] Detection parameters:
  Position = (342.2, 311.9) = 14 41 31.01 -62 13 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 526.9 +/- 37.3
  Background counts = 168.9
  Rate = 0.008 +/- 0.0006

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 3.32'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 8.09"
[Sun Jan  1 11:59:28 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.123
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 8.09"
[Sun Jan  1 23:36:59 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src37.ximg exists
[Sun Jan  1 23:36:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src37.csv
[Sun Jan  1 23:36:59 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Jan  1 23:36:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src37.csv
[Sun Jan  1 23:36:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:03 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Jan  1 23:37:03 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Jan  1 23:37:03 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sun Jan  1 23:38:53 2012] Warning, spatial fit 37 centroid is now closest to src. 131
[Sun Jan  1 23:38:53 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.087650 pixels away
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 34
[Tue Jan  3 05:59:05 2012] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 8.09"
[Tue Jan  3 05:59:05 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.123
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 8.09"
[Tue Jan  3 21:34:50 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src37.ximg exists
[Tue Jan  3 21:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src37.csv
[Tue Jan  3 21:34:50 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src37_1.ximg exists
[Tue Jan  3 21:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src37.csv
[Tue Jan  3 21:34:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:53 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Tue Jan  3 21:34:53 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Tue Jan  3 21:34:53 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Tue Jan  3 21:36:35 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 10.037127 pixels away
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:39 2012] XMMSAS src. selection expression = ellipse(29722.189514, 27082.925781, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 18:24:39 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src30_src.reg
[Thu Jan  5 18:24:39 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (305, 274) - (380, 349)
[Thu Jan  5 18:24:40 2012] XMMSAS bgd. selection expression = annulus(29722.189514, 27082.925781, 1087.500000, 2175.000000, X, Y) && !ellipse(27730.868000, 27034.443400, 1193.672034, 1193.672034, 0.000000, X, Y) && !ellipse(29064.123600, 26661.457000, 1250.520036, 1250.520036, 0.000000, X, Y) && !ellipse(32598.650200, 26010.028200, 1461.352042, 754.500822, 14.811800, X, Y) && !ellipse(30635.222000, 26466.975000, 1335.912038, 1335.912038, 0.000000, X, Y) && !ellipse(31914.445200, 26155.831400, 1425.752041, 1425.752041, 0.000000, X, Y) && !ellipse(29587.986000, 26557.555600, 1933.272056, 807.800023, 14.259000, X, Y) && !ellipse(28241.925720, 26764.455017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.606000, 28126.014000, 1216.096035, 463.824013, 46.497000, X, Y) && !ellipse(32421.637451, 26735.204559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.383698, 27439.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33251.571800, 28512.889800, 1539.640044, 1539.640044, 0.000000, X, Y) && !ellipse(32087.602000, 29001.582000, 1503.800043, 1503.800043, 0.000000, X, Y) && !ellipse(32722.004000, 28434.642000, 2995.168086, 2995.168086, 0.000000, X, Y) && !ellipse(27870.406000, 27862.402000, 1250.192036, 1250.192036, 0.000000, X, Y) && !ellipse(31534.762000, 28899.991200, 1461.688042, 1461.688042, 0.000000, X, Y) && !ellipse(30950.289246, 28830.755463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.734833, 28479.688904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29766.305000, 28336.800000, 1367.144039, 1367.144039, 0.000000, X, Y) && !ellipse(30723.233795, 29466.417267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32991.916000, 27496.596000, 1465.744042, 1465.744042, 0.000000, X, Y) && !ellipse(29717.527283, 29507.286133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28960.113800, 29660.486633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.868000, 29182.546000, 1216.096035, 1216.096035, 0.000000, X, Y) && !ellipse(28181.545044, 29863.094574, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:40 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src30.gif
[Thu Jan  5 21:39:08 2012] Mean detx,y = (-2302.79, -3384.10) 
[Thu Jan  5 21:39:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 21:39:30 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 21:39:31 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Jan  5 21:39:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jan  6 04:22:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 04:22:19 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:07:14 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:14 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jan  6 08:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:23 2012] Using photon index=1.80, rate=0.00791, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src30.arf
[Fri Jan  6 08:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:23 2012] Updating source flux to 8e-14
[Fri Jan  6 08:17:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting