[Sat Dec 31 13:37:58 2011] Detection parameters:
  Position = (413.5, 168.1) = 14 40 46.21 -62 24 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 915.6 +/- 44.2
  Background counts = 109.4
  Rate = 0.01 +/- 0.0006

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 12.61'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.894
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 12.73"
[Sun Jan  1 23:36:59 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jan  1 23:36:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src23.csv
[Sun Jan  1 23:36:59 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jan  1 23:36:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src23.csv
[Sun Jan  1 23:36:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:03 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jan  1 23:37:03 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jan  1 23:37:03 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Jan  1 23:38:53 2012] Warning, spatial fit 23 centroid is now closest to src. 159
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 2
[Tue Jan  3 05:59:05 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Tue Jan  3 05:59:05 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.894
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 12.73"
[Tue Jan  3 21:34:50 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src23.ximg exists
[Tue Jan  3 21:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src23.csv
[Tue Jan  3 21:34:50 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Jan  3 21:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src23.csv
[Tue Jan  3 21:34:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:53 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Jan  3 21:34:53 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Jan  3 21:34:53 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Jan  3 21:36:35 2012] Spatial fit model total counts = 5555.070000, observed total counts = 5560.000000
[Tue Jan  3 21:36:35 2012] Offset between fit and detection position for source 3 = 4.052903 pixels
[Tue Jan  3 21:36:35 2012] 3688.383000 total counts/ 2898.990000 bgd. counts: snr = 14.661213
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.052903 pixels
  Position = (417.5, 168.0) = 14 40 43.68 -62 24 7.4
  Extent = 12.9 (11.4-15.9)", rotation angle = 0
  Source counts = 789.4 +/- 60.7
  Background counts = 2899.0
  Rate = 0.01 +/- 0.0008
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:37 2012] XMMSAS src. selection expression = ellipse(36277.752000, 14570.446600, 774.570022, 774.570022, 0.000000, X, Y)
[Thu Jan  5 18:24:37 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src3_src.reg
[Thu Jan  5 18:24:37 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (373, 124) - (462, 213)
[Thu Jan  5 18:24:37 2012] XMMSAS bgd. selection expression = annulus(36277.752000, 14570.446600, 1290.950037, 2581.900074, X, Y) && !ellipse(35429.138600, 15516.456800, 1972.344057, 975.856028, 57.360200, X, Y) && !ellipse(35210.281125, 15834.944742, 3856.848111, 1777.298394, 242.153910, X, Y) && !ellipse(34654.486000, 19093.300000, 2636.536076, 1103.432032, 44.589600, X, Y) && !ellipse(34937.848000, 16411.992000, 2299.520066, 2299.520066, 0.000000, X, Y) && !ellipse(35007.638200, 18726.576000, 1773.728051, 1773.728051, 0.000000, X, Y) && !ellipse(35856.447800, 14063.409000, 2048.888059, 975.088028, 314.426000, X, Y) && !ellipse(35308.012726, 14313.478745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35024.862000, 16995.091800, 862.136025, 862.136025, 0.000000, X, Y) && !ellipse(35187.782000, 18355.800000, 1790.720052, 1790.720052, 0.000000, X, Y) && !ellipse(35547.743286, 17717.746689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34605.993774, 12837.270508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33417.289368, 11806.885498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35071.230000, 13522.356000, 1992.048057, 1992.048057, 0.000000, X, Y) && !ellipse(39326.341156, 17902.126526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34361.264000, 17762.690000, 1853.704053, 1853.704053, 0.000000, X, Y) && !ellipse(34295.575714, 15194.916611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33997.206177, 12172.897217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33864.117523, 16330.148727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31897.338000, 12119.214000, 2042.376059, 1002.488029, 342.483000, X, Y) && !ellipse(36524.817963, 15847.403336, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:37 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src3.gif
[Thu Jan  5 20:33:14 2012] Mean detx,y = (1289.94, -16735.91) 
[Thu Jan  5 20:33:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 20:33:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 20:33:45 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jan  5 20:33:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jan  6 08:07:13 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:13 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan  6 08:07:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:22 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src3.arf
[Fri Jan  6 08:07:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:22 2012] Updating source flux to 3.3e-13
[Fri Jan  6 08:17:52 2012] Flag c found in src. 3 procflags, skipping spectral fitting