[Sat Dec 31 13:37:59 2011] Detection parameters:
  Position = (307.7, 322.5) = 14 41 52.51 -62 13 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 486.9 +/- 34.2
  Background counts = 168.4
  Rate = 0.008 +/- 0.0006

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 1.87'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Jan  1 11:59:28 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.780
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 7.36"
[Sun Jan  1 23:36:59 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src38.ximg exists
[Sun Jan  1 23:36:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src38.csv
[Sun Jan  1 23:36:59 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Jan  1 23:36:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src38.csv
[Sun Jan  1 23:36:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:03 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Jan  1 23:37:03 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Jan  1 23:37:03 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun Jan  1 23:38:53 2012] Source 29 is offset by 7.420367 and 5.234040 pixels which is larger than
2 X fitted extent = 6.176966 x 6.176966, not incorporating fit results
[Sun Jan  1 23:38:54 2012] Spatial fit model total counts = 2881.390000, observed total counts = 2888.000000
[Sun Jan  1 23:38:54 2012] Offset between fit and detection position for source 29 = 1.508262 pixels
[Sun Jan  1 23:38:54 2012] Warning, changing simple spatial fit ID from 38 to 100
[Sun Jan  1 23:38:54 2012] 2712.023000 total counts/ 2463.690000 bgd. counts: snr = 5.003126
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.508262 pixels
  Position = (307.0, 323.8) = 14 41 52.92 -62 12 50.9
  Extent = 15.2 (14.9-30.4)" x 5.8 (4.4-7.6)", rotation angle = 46 (35-61) degrees
  Source counts = 248.3 +/- 52.1
  Background counts = 2463.7
  Rate = 0.003 +/- 0.0007
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.96
[Sun Jan  1 23:38:54 2012] Source is asymmetric
[Sun Jan  1 23:38:54 2012] Source is confused with source 121
[Sun Jan  1 23:38:54 2012] Source is confused with source 120
[Tue Jan  3 05:59:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Tue Jan  3 05:59:05 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.766
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 10.50"
[Tue Jan  3 21:34:50 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src38.ximg exists
[Tue Jan  3 21:34:50 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src38_1.ximg exists
[Tue Jan  3 21:34:50 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src38 appears to have run properly
[Tue Jan  3 21:34:53 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Tue Jan  3 21:34:53 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Tue Jan  3 21:34:53 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Tue Jan  3 21:36:35 2012] Warning, spatial fit 38 centroid is now closest to src. 121
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.96
[Tue Jan  3 21:36:36 2012] Source is asymmetric
[Thu Jan  5 18:24:40 2012] XMMSAS src. selection expression = ellipse(26659.606000, 28126.014000, 912.072026, 347.868010, 46.497000, X, Y)
[Thu Jan  5 18:24:40 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src29_src.reg
[Thu Jan  5 18:24:40 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (255, 271) - (359, 376)
[Thu Jan  5 18:24:40 2012] XMMSAS bgd. selection expression = annulus(26659.606000, 28126.014000, 1520.120044, 3040.240087, X, Y) && !ellipse(25502.038000, 27765.605400, 1163.568033, 1163.568033, 0.000000, X, Y) && !ellipse(24887.882000, 28173.620000, 1169.608034, 1169.608034, 0.000000, X, Y) && !ellipse(25113.799408, 27774.991028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.868000, 27034.443400, 1193.672034, 1193.672034, 0.000000, X, Y) && !ellipse(29064.123600, 26661.457000, 1250.520036, 1250.520036, 0.000000, X, Y) && !ellipse(30635.222000, 26466.975000, 1335.912038, 1335.912038, 0.000000, X, Y) && !ellipse(29587.986000, 26557.555600, 1933.272056, 807.800023, 14.259000, X, Y) && !ellipse(23585.147086, 28645.893096, 2415.744070, 1310.044271, 18.816043, X, Y) && !ellipse(28241.925720, 26764.455017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.189514, 27082.925781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26326.794678, 28425.850220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.383698, 27439.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.406000, 27862.402000, 1250.192036, 1250.192036, 0.000000, X, Y) && !ellipse(25949.964000, 29420.931000, 1270.880037, 1270.880037, 0.000000, X, Y) && !ellipse(27071.734833, 28479.688904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29766.305000, 28336.800000, 1367.144039, 1367.144039, 0.000000, X, Y) && !ellipse(25598.188263, 29281.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.719635, 31671.079254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.044000, 33797.660000, 3088.896089, 3088.896089, 0.000000, X, Y) && !ellipse(25240.492096, 31434.980774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29717.527283, 29507.286133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28960.113800, 29660.486633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.868000, 29182.546000, 1216.096035, 1216.096035, 0.000000, X, Y) && !ellipse(23843.204000, 32803.764000, 3098.176089, 3000.744086, 0.236000, X, Y) && !ellipse(28181.545044, 29863.094574, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:40 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src29.gif
[Thu Jan  5 21:39:45 2012] Mean detx,y = (-611.12, -499.91) 
[Thu Jan  5 21:39:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 21:40:06 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 21:40:06 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Jan  5 21:40:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jan  6 08:07:14 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:14 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jan  6 08:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:23 2012] Using photon index=1.80, rate=0.00346, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src29.arf
[Fri Jan  6 08:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:23 2012] Updating source flux to 4.1e-14
[Fri Jan  6 08:17:52 2012] Flag b found in src. 29 procflags, skipping spectral fitting
[Fri Jan  6 08:17:52 2012] Flag c found in src. 29 procflags, skipping spectral fitting