[Sat Dec 31 13:37:59 2011] Detection parameters:
  Position = (243.3, 333.2) = 14 42 32.54 -62 12 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 965.1 +/- 45.2
  Background counts = 193.4
  Rate = 0.02 +/- 0.0008

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 4.73'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 8.79"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.983
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.79"
[Sun Jan  1 23:36:58 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jan  1 23:36:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src11.csv
[Sun Jan  1 23:36:58 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jan  1 23:36:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src11.csv
[Sun Jan  1 23:36:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:02 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jan  1 23:37:02 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jan  1 23:37:02 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jan  1 23:38:53 2012] Spatial fit model total counts = 5576.500000, observed total counts = 5570.000000
[Sun Jan  1 23:38:53 2012] Offset between fit and detection position for source 19 = 2.950689 pixels
[Sun Jan  1 23:38:53 2012] 4899.730000 total counts/ 2521.410000 bgd. counts: snr = 47.364020
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.950689 pixels
  Position = (246.2, 333.2) = 14 42 30.71 -62 12 10.1
  Extent = 17.6 (15.9-35.2)", rotation angle = 0
  Source counts = 2378.3 +/- 70.0
  Background counts = 2521.4
  Rate = 0.03 +/- 0.001
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 25
[Tue Jan  3 05:59:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 17.58"
[Tue Jan  3 05:59:05 2012] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.982
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 17.58"
[Tue Jan  3 21:34:49 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jan  3 21:34:50 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jan  3 21:34:50 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src11 appears to have run properly
[Tue Jan  3 21:34:53 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jan  3 21:34:53 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jan  3 21:34:53 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jan  3 21:36:35 2012] Warning, spatial fit 11 centroid is now closest to src. 109
[Tue Jan  3 21:36:35 2012] Spatial fit model total counts = 9367.440000, observed total counts = 9365.000000
[Tue Jan  3 21:36:35 2012] Offset between fit and detection position for source 19 = 0.675240 pixels
[Tue Jan  3 21:36:35 2012] Warning, changing simple spatial fit ID from 11 to 13
[Tue Jan  3 21:36:35 2012] 8609.240000 total counts/ 5889.690000 bgd. counts: snr = 35.436501
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.675240 pixels
  Position = (245.7, 333.6) = 14 42 31.04 -62 12 8.3
  Extent = 18.3 (17.0-19.5)", rotation angle = 0
  Source counts = 2719.6 +/- 92.8
  Background counts = 5889.7
  Rate = 0.04 +/- 0.001
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:34 2012] Counts = 2719.550000, rescaling region sizes by 2.000000
[Thu Jan  5 18:24:34 2012] XMMSAS src. selection expression = ellipse(21326.090000, 28972.729000, 2197.236063, 2197.236063, 0.000000, X, Y)
[Thu Jan  5 18:24:34 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src19_src.reg
[Thu Jan  5 18:24:34 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (119, 207) - (372, 460)
[Thu Jan  5 18:24:34 2012] XMMSAS bgd. selection expression = annulus(21326.090000, 28972.729000, 7324.120211, 14648.240421, X, Y) && !ellipse(25502.038000, 27765.605400, 1163.568033, 1163.568033, 0.000000, X, Y) && !ellipse(24887.882000, 28173.620000, 1169.608034, 1169.608034, 0.000000, X, Y) && !ellipse(25113.799408, 27774.991028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.868000, 27034.443400, 1193.672034, 1193.672034, 0.000000, X, Y) && !ellipse(29064.123600, 26661.457000, 1250.520036, 1250.520036, 0.000000, X, Y) && !ellipse(32598.650200, 26010.028200, 1461.352042, 754.500822, 14.811800, X, Y) && !ellipse(30635.222000, 26466.975000, 1335.912038, 1335.912038, 0.000000, X, Y) && !ellipse(31914.445200, 26155.831400, 1425.752041, 1425.752041, 0.000000, X, Y) && !ellipse(20492.042600, 29023.254000, 436.435213, 436.435213, 0.000000, X, Y) && !ellipse(29587.986000, 26557.555600, 1933.272056, 807.800023, 14.259000, X, Y) && !ellipse(23585.147086, 28645.893096, 2415.744070, 1310.044271, 18.816043, X, Y) && !ellipse(21927.096000, 28746.733504, 1333.944038, 639.304018, 204.235000, X, Y) && !ellipse(34242.915545, 25647.989289, 1555.344045, 1393.847570, 137.022404, X, Y) && !ellipse(19885.256600, 29112.530000, 1494.552043, 1494.552043, 0.000000, X, Y) && !ellipse(36178.762297, 24802.731917, 1972.344057, 1282.764951, 38.910763, X, Y) && !ellipse(35429.138600, 15516.456800, 1972.344057, 975.856028, 57.360200, X, Y) && !ellipse(22248.359039, 28660.276031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36277.752000, 14570.446600, 1032.760030, 1032.760030, 0.000000, X, Y) && !ellipse(28241.925720, 26764.455017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36406.558000, 24446.112000, 977.216028, 977.216028, 0.000000, X, Y) && !ellipse(14479.464000, 29201.132000, 1049.200030, 1049.200030, 0.000000, X, Y) && !ellipse(26739.075592, 40695.138855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18439.556000, 29354.790000, 1164.680034, 1164.680034, 0.000000, X, Y) && !ellipse(35210.281125, 15834.944742, 3856.848111, 1777.298394, 242.153910, X, Y) && !ellipse(34248.476000, 19638.356000, 2070.064060, 2070.064060, 0.000000, X, Y) && !ellipse(34654.486000, 19093.300000, 2636.536076, 1103.432032, 44.589600, X, Y) && !ellipse(34937.848000, 16411.992000, 2299.520066, 2299.520066, 0.000000, X, Y) && !ellipse(35007.638200, 18726.576000, 1773.728051, 1773.728051, 0.000000, X, Y) && !ellipse(35856.447800, 14063.409000, 2048.888059, 975.088028, 314.426000, X, Y) && !ellipse(35308.012726, 14313.478745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.189514, 27082.925781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.606000, 28126.014000, 1216.096035, 463.824013, 46.497000, X, Y) && !ellipse(35024.862000, 16995.091800, 862.136025, 862.136025, 0.000000, X, Y) && !ellipse(17431.710000, 29629.798200, 1668.160048, 1668.160048, 0.000000, X, Y) && !ellipse(18624.110253, 34419.961514, 1764.384051, 609.940032, 359.456956, X, Y) && !ellipse(32421.637451, 26735.204559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26326.794678, 28425.850220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.383698, 27439.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17070.658966, 23201.620758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16578.005900, 28605.658200, 321.886409, 321.886409, 0.000000, X, Y) && !ellipse(13252.702942, 29191.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.772000, 29293.234000, 2813.232081, 2813.232081, 0.000000, X, Y) && !ellipse(17361.246000, 29607.300400, 1155.472033, 1155.472033, 0.000000, X, Y) && !ellipse(23755.658200, 33372.695000, 582.836817, 582.836817, 0.000000, X, Y) && !ellipse(19776.746800, 20222.160000, 373.613611, 373.613611, 0.000000, X, Y) && !ellipse(31393.230000, 32974.538000, 1553.664045, 1553.664045, 0.000000, X, Y) && !ellipse(15259.288000, 30152.764000, 1800.992052, 1800.992052, 0.000000, X, Y) && !ellipse(24559.580600, 33585.568400, 1545.968044, 1545.968044, 0.000000, X, Y) && !ellipse(19362.324936, 34467.374695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18064.766983, 34322.890656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18590.734924, 33988.577332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35187.782000, 18355.800000, 1790.720052, 1790.720052, 0.000000, X, Y) && !ellipse(24804.037800, 32732.738620, 1486.456043, 1486.456043, 0.000000, X, Y) && !ellipse(20655.780130, 32645.313800, 720.609621, 720.609621, 0.000000, X, Y) && !ellipse(33251.571800, 28512.889800, 1539.640044, 1539.640044, 0.000000, X, Y) && !ellipse(22065.998000, 34203.116000, 1621.616047, 1621.616047, 0.000000, X, Y) && !ellipse(25328.906800, 33142.779000, 924.168027, 924.168027, 0.000000, X, Y) && !ellipse(13861.349823, 29360.139099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.812000, 33160.031800, 1549.088045, 1549.088045, 0.000000, X, Y) && !ellipse(21647.962662, 33720.735321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21095.012000, 34817.550000, 3243.232093, 3243.232093, 0.000000, X, Y) && !ellipse(34777.466187, 35507.081512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32087.602000, 29001.582000, 1503.800043, 1503.800043, 0.000000, X, Y) && !ellipse(26781.717000, 33501.330000, 1544.448044, 1544.448044, 0.000000, X, Y) && !ellipse(15739.801636, 29102.187073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35547.743286, 17717.746689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34327.797150, 27777.821289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32722.004000, 28434.642000, 2995.168086, 2995.168086, 0.000000, X, Y) && !ellipse(34088.711800, 27379.074000, 1577.560045, 1577.560045, 0.000000, X, Y) && !ellipse(10855.915070, 20231.074417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.406000, 27862.402000, 1250.192036, 1250.192036, 0.000000, X, Y) && !ellipse(31534.762000, 28899.991200, 1461.688042, 1461.688042, 0.000000, X, Y) && !ellipse(28627.037000, 34122.613400, 1532.224044, 278.941608, 49.781788, X, Y) && !ellipse(25949.964000, 29420.931000, 1270.880037, 1270.880037, 0.000000, X, Y) && !ellipse(30950.289246, 28830.755463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26195.880493, 33457.258179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30003.293396, 34150.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22654.251953, 34626.028625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31161.345490, 32599.606720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.734833, 28479.688904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35071.230000, 13522.356000, 1992.048057, 1992.048057, 0.000000, X, Y) && !ellipse(29766.305000, 28336.800000, 1367.144039, 1367.144039, 0.000000, X, Y) && !ellipse(25598.188263, 29281.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30723.233795, 29466.417267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32991.916000, 27496.596000, 1465.744042, 1465.744042, 0.000000, X, Y) && !ellipse(31148.553558, 31442.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29597.193390, 33758.609314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13617.801331, 30153.265381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19218.722366, 26791.135406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34361.264000, 17762.690000, 1853.704053, 1853.704053, 0.000000, X, Y) && !ellipse(13799.646942, 21613.793762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.719635, 31671.079254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34295.575714, 15194.916611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33446.115021, 31325.630737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.044000, 33797.660000, 3088.896089, 3088.896089, 0.000000, X, Y) && !ellipse(25240.492096, 31434.980774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29717.527283, 29507.286133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15515.588394, 29520.099304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28960.113800, 29660.486633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27744.888306, 33626.070251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11161.251404, 20740.173630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20739.641296, 26561.233765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.868000, 29182.546000, 1216.096035, 1216.096035, 0.000000, X, Y) && !ellipse(33864.117523, 16330.148727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17307.998672, 34390.705414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36524.817963, 15847.403336, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23843.204000, 32803.764000, 3098.176089, 3000.744086, 0.236000, X, Y) && !ellipse(13973.320374, 22210.295212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13156.958603, 21951.056824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.545044, 29863.094574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11571.838409, 21306.196671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11099.095840, 21698.823730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13431.152771, 21193.749542, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:34 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src19.gif
[Thu Jan  5 19:23:43 2012] Mean detx,y = (2477.63, 3653.98) 
[Thu Jan  5 19:23:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 19:31:09 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 19:31:10 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jan  5 19:31:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jan  6 08:07:12 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:12 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jan  6 08:07:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:22 2012] Using photon index=1.80, rate=0.0378, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src19.arf
[Fri Jan  6 08:07:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:22 2012] Updating source flux to 4e-13
[Fri Jan  6 08:17:52 2012] Flag c found in src. 19 procflags, skipping spectral fitting