[Sat Dec 31 13:37:58 2011] Detection parameters:
  Position = (159.9, 338.0) = 14 43 24.38 -62 11 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.4 +/- 24.3
  Background counts = 86.9
  Rate = 0.003 +/- 0.0003

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 10.45'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 11.65"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 11.65"
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src73.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src73.csv
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src73_1.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src73.csv
[Sun Jan  1 23:37:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:05 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Sun Jan  1 23:37:05 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Sun Jan  1 23:37:05 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Sun Jan  1 23:38:53 2012] Warning, spatial fit 73 centroid is now closest to src. 28
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 28
[Tue Jan  3 05:59:05 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 11.65"
[Tue Jan  3 05:59:05 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 11.65"
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src70.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src70.csv
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src70_1.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src70.csv
[Tue Jan  3 21:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Tue Jan  3 21:34:55 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Tue Jan  3 21:36:36 2012] Source 17 is offset by -8.314255 and 3.084725 pixels which is larger than
2 X fitted extent = 5.509379 x 5.509379, not incorporating fit results
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:41 2012] XMMSAS src. selection expression = ellipse(13861.349823, 29360.139099, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 18:24:41 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src17_src.reg
[Thu Jan  5 18:24:41 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (122, 301) - (197, 376)
[Thu Jan  5 18:24:42 2012] XMMSAS bgd. selection expression = annulus(13861.349823, 29360.139099, 1087.500000, 2175.000000, X, Y) && !ellipse(14479.464000, 29201.132000, 1049.200030, 1049.200030, 0.000000, X, Y) && !ellipse(17431.710000, 29629.798200, 1668.160048, 1668.160048, 0.000000, X, Y) && !ellipse(13252.702942, 29191.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15259.288000, 30152.764000, 1800.992052, 1800.992052, 0.000000, X, Y) && !ellipse(15739.801636, 29102.187073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13617.801331, 30153.265381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15515.588394, 29520.099304, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:42 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src17.gif
[Thu Jan  5 22:30:11 2012] Mean detx,y = (7737.75, 8967.91) 
[Thu Jan  5 22:30:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 22:30:25 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 22:30:25 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jan  5 22:30:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Jan  6 05:56:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 05:56:20 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:07:16 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:16 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Jan  6 08:07:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:24 2012] Using photon index=1.80, rate=0.00291, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src17.arf
[Fri Jan  6 08:07:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:24 2012] Updating source flux to 6.8e-14
[Fri Jan  6 08:17:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting