[Sat Dec 31 13:38:04 2011] Detection parameters:
  Position = (227.8, 233.1) = 14 42 42.32 -62 19 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.6 +/- 19.8
  Background counts = 65.1
  Rate = 0.004 +/- 0.0005

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 6.98'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.165
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 9.92"
[Sun Jan  1 23:37:00 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src53.ximg exists
[Sun Jan  1 23:37:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src53.csv
[Sun Jan  1 23:37:00 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Jan  1 23:37:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src53.csv
[Sun Jan  1 23:37:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:04 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Jan  1 23:37:04 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Jan  1 23:37:04 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Sun Jan  1 23:38:53 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 148 at 13.775658 pixels away
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 05:59:05 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Jan  3 05:59:05 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.165
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 9.92"
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src53.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src53.csv
[Tue Jan  3 21:34:51 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src53_1.ximg exists
[Tue Jan  3 21:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src53.csv
[Tue Jan  3 21:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:54 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Tue Jan  3 21:34:54 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Tue Jan  3 21:34:54 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Tue Jan  3 21:36:36 2012] Spatial fit model total counts = 967.999000, observed total counts = 968.000000
[Tue Jan  3 21:36:36 2012] Offset between fit and detection position for source 148 = 0.079668 pixels
[Tue Jan  3 21:36:36 2012] 973.676000 total counts/ 862.180000 bgd. counts: snr = 3.797172
Spatial fit parameters:
  Offset between fit and detection position for source 148 = 0.079668 pixels
  Position = (227.9, 233.0) = 14 42 42.30 -62 19 25.6
  Extent = 4.7 (3.9-5.9)", rotation angle = 0
  Source counts = 111.5 +/- 31.2
  Background counts = 862.2
  Rate = 0.002 +/- 0.0004
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:40 2012] XMMSAS src. selection expression = ellipse(19776.746800, 20222.160000, 280.210208, 280.210208, 0.000000, X, Y)
[Thu Jan  5 18:24:40 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src148_src.reg
[Thu Jan  5 18:24:40 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (212, 217) - (244, 249)
[Thu Jan  5 18:24:40 2012] XMMSAS bgd. selection expression = annulus(19776.746800, 20222.160000, 467.017013, 934.034027, X, Y)
[Thu Jan  5 18:24:40 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src148.gif
[Thu Jan  5 22:12:23 2012] Mean detx,y = (9565.34, -1676.40) 
[Thu Jan  5 22:12:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 22:12:39 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 22:12:40 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src148_src_b10.pi.gz
[Thu Jan  5 22:12:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src148_bgd.pi.gz
[Fri Jan  6 08:07:15 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:15 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src148_src_b10.pi.gz
[Fri Jan  6 08:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:23 2012] Using photon index=1.80, rate=0.00155, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src148.arf
[Fri Jan  6 08:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:23 2012] Updating source flux to 3.6e-14