[Sat Dec 31 13:38:04 2011] Detection parameters:
  Position = (390.1, 313.7) = 14 41 1.21 -62 13 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.5 +/- 21.9
  Background counts = 142.3
  Rate = 0.002 +/- 0.0004

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 6.73'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.990
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 9.80"
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src85.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src85.csv
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src85_1.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src85.csv
[Sun Jan  1 23:37:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:06 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sun Jan  1 23:37:06 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sun Jan  1 23:37:06 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Sun Jan  1 23:38:53 2012] Source 133 is offset by 1.991182 and 6.896178 pixels which is larger than
2 X fitted extent = 2.278915 x 2.278915, not incorporating fit results
[Sun Jan  1 23:38:54 2012] Spatial fit model total counts = 1664.810000, observed total counts = 1662.000000
[Sun Jan  1 23:38:54 2012] Offset between fit and detection position for source 133 = 2.739363 pixels
[Sun Jan  1 23:38:54 2012] Warning, changing simple spatial fit ID from 85 to 83
[Sun Jan  1 23:38:54 2012] 1699.718000 total counts/ 779.001000 bgd. counts: snr = 32.988089
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 2.739363 pixels
  Position = (392.7, 314.3) = 14 40 59.55 -62 13 31.7
  Extent = 20.0 (20.0-40.1)", rotation angle = 0
  Source counts = 920.7 +/- 41.2
  Background counts = 779.0
  Rate = 0.01 +/- 0.0006
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 129
[Tue Jan  3 05:59:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 20.04"
[Tue Jan  3 05:59:05 2012] source mask rpix=4.6, npix_max = 104, mask sum = 88, frac = 0.844
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 20.04"
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src82.ximg exists
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src82_1.ximg exists
[Tue Jan  3 21:34:52 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src82 appears to have run properly
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Tue Jan  3 21:34:55 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly
[Tue Jan  3 21:36:36 2012] Spatial fit model total counts = 2312.120000, observed total counts = 2317.000000
[Tue Jan  3 21:36:36 2012] Offset between fit and detection position for source 133 = 1.037894 pixels
[Tue Jan  3 21:36:36 2012] Warning, changing simple spatial fit ID from 82 to 80
[Tue Jan  3 21:36:36 2012] 2198.550000 total counts/ 1599.160000 bgd. counts: snr = 14.988685
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 1.037894 pixels
  Position = (392.4, 315.3) = 14 40 59.78 -62 13 27.5
  Extent = 19.7 (19.1-20.0)", rotation angle = 0
  Source counts = 599.4 +/- 46.9
  Background counts = 1599.2
  Rate = 0.008 +/- 0.0007
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:43 2012] XMMSAS src. selection expression = ellipse(34088.711800, 27379.074000, 1183.170034, 1183.170034, 0.000000, X, Y)
[Thu Jan  5 18:24:43 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src133_src.reg
[Thu Jan  5 18:24:43 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (324, 247) - (460, 383)
[Thu Jan  5 18:24:43 2012] XMMSAS bgd. selection expression = annulus(34088.711800, 27379.074000, 1971.950057, 3943.900113, X, Y) && !ellipse(29064.123600, 26661.457000, 1250.520036, 1250.520036, 0.000000, X, Y) && !ellipse(32598.650200, 26010.028200, 1461.352042, 754.500822, 14.811800, X, Y) && !ellipse(30635.222000, 26466.975000, 1335.912038, 1335.912038, 0.000000, X, Y) && !ellipse(31914.445200, 26155.831400, 1425.752041, 1425.752041, 0.000000, X, Y) && !ellipse(29587.986000, 26557.555600, 1933.272056, 807.800023, 14.259000, X, Y) && !ellipse(34242.915545, 25647.989289, 1555.344045, 1393.847570, 137.022404, X, Y) && !ellipse(36178.762297, 24802.731917, 1972.344057, 1282.764951, 38.910763, X, Y) && !ellipse(37921.130000, 24225.472000, 1555.344045, 1061.496031, 43.578400, X, Y) && !ellipse(38821.012000, 23375.944000, 1870.408054, 1870.408054, 0.000000, X, Y) && !ellipse(36406.558000, 24446.112000, 977.216028, 977.216028, 0.000000, X, Y) && !ellipse(29722.189514, 27082.925781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32421.637451, 26735.204559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33251.571800, 28512.889800, 1539.640044, 1539.640044, 0.000000, X, Y) && !ellipse(36859.436615, 23802.464508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32087.602000, 29001.582000, 1503.800043, 1503.800043, 0.000000, X, Y) && !ellipse(34327.797150, 27777.821289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32722.004000, 28434.642000, 2995.168086, 2995.168086, 0.000000, X, Y) && !ellipse(31534.762000, 28899.991200, 1461.688042, 1461.688042, 0.000000, X, Y) && !ellipse(30950.289246, 28830.755463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29766.305000, 28336.800000, 1367.144039, 1367.144039, 0.000000, X, Y) && !ellipse(30723.233795, 29466.417267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32991.916000, 27496.596000, 1465.744042, 1465.744042, 0.000000, X, Y) && !ellipse(31148.553558, 31442.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33446.115021, 31325.630737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.044000, 33797.660000, 3088.896089, 3088.896089, 0.000000, X, Y) && !ellipse(29717.527283, 29507.286133, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:43 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src133.gif
[Thu Jan  5 23:11:04 2012] Mean detx,y = (-5653.54, -6052.15) 
[Thu Jan  5 23:11:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 23:12:10 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 23:12:11 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src133_src_b10.pi.gz
[Thu Jan  5 23:12:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src133_bgd.pi.gz
[Fri Jan  6 08:07:17 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:17 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src133_src_b10.pi.gz
[Fri Jan  6 08:07:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:24 2012] Using photon index=1.80, rate=0.00834, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src133.arf
[Fri Jan  6 08:07:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:25 2012] Updating source flux to 1.1e-13
[Fri Jan  6 08:17:52 2012] Flag b found in src. 133 procflags, skipping spectral fitting
[Fri Jan  6 08:17:52 2012] Flag c found in src. 133 procflags, skipping spectral fitting