[Sat Dec 31 13:38:03 2011] Detection parameters:
  Position = (356.3, 331.9) = 14 41 22.25 -62 12 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.0 +/- 22.3
  Background counts = 150.9
  Rate = 0.002 +/- 0.0004

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 4.85'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Sun Jan  1 11:59:28 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.972
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 95 for pass 0, mean size = 8.85"
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src95.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src95.csv
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src95_1.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src95.csv
[Sun Jan  1 23:37:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:06 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Sun Jan  1 23:37:06 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Sun Jan  1 23:37:06 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Sun Jan  1 23:38:54 2012] Warning: source 89 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 119 at 10.327247 pixels away
[Sun Jan  1 23:38:54 2012] Warning, spatial fit 95 centroid is now closest to src. 115
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 114
[Tue Jan  3 05:59:05 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Tue Jan  3 05:59:05 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.972
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 91 for pass 1, mean size = 8.85"
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src91.ximg exists
[Tue Jan  3 21:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src91.csv
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src91_1.ximg exists
[Tue Jan  3 21:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src91.csv
[Tue Jan  3 21:34:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:56 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Tue Jan  3 21:34:56 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Tue Jan  3 21:34:56 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src91 appears to have run properly
[Tue Jan  3 21:36:36 2012] Warning, spatial fit 91 centroid is now closest to src. 115
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:44 2012] XMMSAS src. selection expression = ellipse(30950.289246, 28830.755463, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 18:24:44 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src119_src.reg
[Thu Jan  5 18:24:44 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (319, 294) - (394, 369)
[Thu Jan  5 18:24:44 2012] XMMSAS bgd. selection expression = annulus(30950.289246, 28830.755463, 1087.500000, 2175.000000, X, Y) && !ellipse(27730.868000, 27034.443400, 1193.672034, 1193.672034, 0.000000, X, Y) && !ellipse(29064.123600, 26661.457000, 1250.520036, 1250.520036, 0.000000, X, Y) && !ellipse(32598.650200, 26010.028200, 1461.352042, 754.500822, 14.811800, X, Y) && !ellipse(30635.222000, 26466.975000, 1335.912038, 1335.912038, 0.000000, X, Y) && !ellipse(31914.445200, 26155.831400, 1425.752041, 1425.752041, 0.000000, X, Y) && !ellipse(29587.986000, 26557.555600, 1933.272056, 807.800023, 14.259000, X, Y) && !ellipse(34242.915545, 25647.989289, 1555.344045, 1393.847570, 137.022404, X, Y) && !ellipse(28241.925720, 26764.455017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.189514, 27082.925781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32421.637451, 26735.204559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.383698, 27439.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33251.571800, 28512.889800, 1539.640044, 1539.640044, 0.000000, X, Y) && !ellipse(32087.602000, 29001.582000, 1503.800043, 1503.800043, 0.000000, X, Y) && !ellipse(32722.004000, 28434.642000, 2995.168086, 2995.168086, 0.000000, X, Y) && !ellipse(34088.711800, 27379.074000, 1577.560045, 1577.560045, 0.000000, X, Y) && !ellipse(27870.406000, 27862.402000, 1250.192036, 1250.192036, 0.000000, X, Y) && !ellipse(31534.762000, 28899.991200, 1461.688042, 1461.688042, 0.000000, X, Y) && !ellipse(29766.305000, 28336.800000, 1367.144039, 1367.144039, 0.000000, X, Y) && !ellipse(30723.233795, 29466.417267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32991.916000, 27496.596000, 1465.744042, 1465.744042, 0.000000, X, Y) && !ellipse(31148.553558, 31442.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33446.115021, 31325.630737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.044000, 33797.660000, 3088.896089, 3088.896089, 0.000000, X, Y) && !ellipse(29717.527283, 29507.286133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28960.113800, 29660.486633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.545044, 29863.094574, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:44 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src119.gif
[Thu Jan  5 23:18:20 2012] Mean detx,y = (-4491.83, -2873.30) 
[Thu Jan  5 23:18:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 23:18:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 23:18:45 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src119_src_b10.pi.gz
[Thu Jan  5 23:18:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src119_bgd.pi.gz
[Fri Jan  6 07:00:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 07:00:54 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:07:17 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:17 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src119_src_b10.pi.gz
[Fri Jan  6 08:07:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:25 2012] Using photon index=1.80, rate=0.00202, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src119.arf
[Fri Jan  6 08:07:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:25 2012] Updating source flux to 2.5e-14
[Fri Jan  6 08:17:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting