[Sat Dec 31 13:38:03 2011] Detection parameters:
  Position = (301.9, 340.1) = 14 41 56.09 -62 11 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.6 +/- 23.9
  Background counts = 154.5
  Rate = 0.002 +/- 0.0004

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 3.03'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Sun Jan  1 11:59:28 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.739
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 7.94"
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src91.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src91.csv
[Sun Jan  1 23:37:01 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src91_1.ximg exists
[Sun Jan  1 23:37:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src91.csv
[Sun Jan  1 23:37:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:37:06 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Sun Jan  1 23:37:06 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Sun Jan  1 23:37:06 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Sun Jan  1 23:38:54 2012] Spatial fit model total counts = 2023.600000, observed total counts = 2021.000000
[Sun Jan  1 23:38:54 2012] Offset between fit and detection position for source 111 = 3.346877 pixels
[Sun Jan  1 23:38:54 2012] 2012.494000 total counts/ 1767.170000 bgd. counts: snr = 5.835806
Spatial fit parameters:
  Offset between fit and detection position for source 111 = 3.346877 pixels
  Position = (298.8, 338.7) = 14 41 57.99 -62 11 46.1
  Extent = 15.9 (15.8-31.8)", rotation angle = 0
  Source counts = 245.3 +/- 44.9
  Background counts = 1767.2
  Rate = 0.003 +/- 0.0006
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:54 2012] Source is confused with source 116
[Sun Jan  1 23:38:54 2012] Source is confused with source 108
[Tue Jan  3 05:59:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 15.89"
[Tue Jan  3 05:59:05 2012] source mask rpix=3.7, npix_max = 68, mask sum = 64, frac = 0.928
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 87 for pass 1, mean size = 15.89"
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src87.ximg exists
[Tue Jan  3 21:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src87.csv
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src87_1.ximg exists
[Tue Jan  3 21:34:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src87.csv
[Tue Jan  3 21:34:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Tue Jan  3 21:34:55 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Tue Jan  3 21:34:55 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Tue Jan  3 21:36:36 2012] Warning, spatial fit 87 centroid is now closest to src. 10
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:44 2012] XMMSAS src. selection expression = ellipse(25949.964000, 29420.931000, 953.160027, 953.160027, 0.000000, X, Y)
[Thu Jan  5 18:24:44 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src111_src.reg
[Thu Jan  5 18:24:44 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (244, 284) - (354, 394)
[Thu Jan  5 18:24:44 2012] XMMSAS bgd. selection expression = annulus(25949.964000, 29420.931000, 1588.600046, 3177.200091, X, Y) && !ellipse(25502.038000, 27765.605400, 1163.568033, 1163.568033, 0.000000, X, Y) && !ellipse(24887.882000, 28173.620000, 1169.608034, 1169.608034, 0.000000, X, Y) && !ellipse(25113.799408, 27774.991028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.868000, 27034.443400, 1193.672034, 1193.672034, 0.000000, X, Y) && !ellipse(29064.123600, 26661.457000, 1250.520036, 1250.520036, 0.000000, X, Y) && !ellipse(29587.986000, 26557.555600, 1933.272056, 807.800023, 14.259000, X, Y) && !ellipse(21326.090000, 28972.729000, 1464.824042, 1464.824042, 0.000000, X, Y) && !ellipse(23585.147086, 28645.893096, 2415.744070, 1310.044271, 18.816043, X, Y) && !ellipse(21927.096000, 28746.733504, 1333.944038, 639.304018, 204.235000, X, Y) && !ellipse(22248.359039, 28660.276031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28241.925720, 26764.455017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.189514, 27082.925781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.606000, 28126.014000, 1216.096035, 463.824013, 46.497000, X, Y) && !ellipse(26326.794678, 28425.850220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.383698, 27439.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.772000, 29293.234000, 2813.232081, 2813.232081, 0.000000, X, Y) && !ellipse(24559.580600, 33585.568400, 1545.968044, 1545.968044, 0.000000, X, Y) && !ellipse(24804.037800, 32732.738620, 1486.456043, 1486.456043, 0.000000, X, Y) && !ellipse(22065.998000, 34203.116000, 1621.616047, 1621.616047, 0.000000, X, Y) && !ellipse(25328.906800, 33142.779000, 924.168027, 924.168027, 0.000000, X, Y) && !ellipse(22648.812000, 33160.031800, 1549.088045, 1549.088045, 0.000000, X, Y) && !ellipse(21095.012000, 34817.550000, 3243.232093, 3243.232093, 0.000000, X, Y) && !ellipse(26781.717000, 33501.330000, 1544.448044, 1544.448044, 0.000000, X, Y) && !ellipse(27870.406000, 27862.402000, 1250.192036, 1250.192036, 0.000000, X, Y) && !ellipse(28627.037000, 34122.613400, 1532.224044, 278.941608, 49.781788, X, Y) && !ellipse(26195.880493, 33457.258179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.734833, 28479.688904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29766.305000, 28336.800000, 1367.144039, 1367.144039, 0.000000, X, Y) && !ellipse(25598.188263, 29281.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.719635, 31671.079254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.044000, 33797.660000, 3088.896089, 3088.896089, 0.000000, X, Y) && !ellipse(25240.492096, 31434.980774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29717.527283, 29507.286133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28960.113800, 29660.486633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.868000, 29182.546000, 1216.096035, 1216.096035, 0.000000, X, Y) && !ellipse(23843.204000, 32803.764000, 3098.176089, 3000.744086, 0.236000, X, Y) && !ellipse(28181.545044, 29863.094574, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:44 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src111.gif
[Thu Jan  5 23:16:04 2012] Mean detx,y = (-1179.41, 860.44) 
[Thu Jan  5 23:16:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 23:16:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 23:16:44 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Thu Jan  5 23:16:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src111_bgd.pi.gz
[Fri Jan  6 08:07:17 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:17 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Fri Jan  6 08:07:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:25 2012] Using photon index=1.80, rate=0.00341, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src111.arf
[Fri Jan  6 08:07:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:25 2012] Updating source flux to 3.2e-14
[Fri Jan  6 08:17:52 2012] Flag c found in src. 111 procflags, skipping spectral fitting