[Sat Dec 31 13:37:58 2011] Detection parameters:
  Position = (282.2, 327.0) = 14 42 8.34 -62 12 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2032.8 +/- 59.7
  Background counts = 174.1
  Rate = 0.03 +/- 0.0009

[Sat Dec 31 13:38:05 2011] Off-axis axis estimate = 2.38'
[Sun Jan  1 11:59:28 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 11:59:28 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sun Jan  1 11:59:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.789
[Sun Jan  1 11:59:28 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.62"
[Sun Jan  1 23:36:58 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jan  1 23:36:58 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jan  1 23:36:58 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_src2 appears to have run properly
[Sun Jan  1 23:37:02 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jan  1 23:37:02 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jan  1 23:37:02 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jan  1 23:38:52 2012] Spatial fit model total counts = 8370.750000, observed total counts = 8371.000000
[Sun Jan  1 23:38:52 2012] Offset between fit and detection position for source 10 = 2.890914 pixels
[Sun Jan  1 23:38:52 2012] 8212.130000 total counts/ 6525.280000 bgd. counts: snr = 20.882231
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.890914 pixels
  Position = (279.5, 327.9) = 14 42 10.05 -62 12 33.1
  Extent = 15.2 (15.2-30.5)" x 8.8 (7.9-9.7)", rotation angle = 0 (360-0) degrees
  Source counts = 1686.8 +/- 90.6
  Background counts = 6525.3
  Rate = 0.02 +/- 0.001
[Sun Jan  1 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:54 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:54 2012] Source does appear to be extended
[Sun Jan  1 23:38:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.57
[Sun Jan  1 23:38:54 2012] Source is asymmetric
[Sun Jan  1 23:38:54 2012] Source is confused with source 23
[Tue Jan  3 05:59:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan  3 05:59:05 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Tue Jan  3 05:59:05 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.986
[Tue Jan  3 05:59:05 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.02"
[Tue Jan  3 21:34:49 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jan  3 21:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src2.csv
[Tue Jan  3 21:34:49 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jan  3 21:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src2.csv
[Tue Jan  3 21:34:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jan  3 21:34:52 2012] fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jan  3 21:34:52 2012] Fit fullrun_mos2_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jan  3 21:36:35 2012] Spatial fit model total counts = 9064.900000, observed total counts = 9061.000000
[Tue Jan  3 21:36:35 2012] Offset between fit and detection position for source 10 = 5.127426 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 5.127426 pixels
  Position = (283.6, 324.8) = 14 42 7.50 -62 12 46.5
  Extent = 23.9 (23.8-24.0)", rotation angle = 0
  Source counts = 8100.7 +/- 90.0
  Background counts = 0.0
  Rate = 0.1 +/- 0.001
[Tue Jan  3 21:36:36 2012] Spatial fit model total counts = 4042.000000, observed total counts = 4044.000000
[Tue Jan  3 21:36:36 2012] Offset between fit and detection position for source 10 = 3.106035 pixels
[Tue Jan  3 21:36:36 2012] Warning, changing simple spatial fit ID from 2 to 87
[Tue Jan  3 21:36:36 2012] 3984.274000 total counts/ 3657.880000 bgd. counts: snr = 5.396690
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.106035 pixels
  Position = (286.6, 324.4) = 14 42 5.59 -62 12 48.5
  Extent = 14.6 (10.5-16.7)", rotation angle = 0
  Source counts = 326.4 +/- 63.1
  Background counts = 3657.9
  Rate = 0.005 +/- 0.0009
[Tue Jan  3 21:36:36 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:36 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:36 2012] Source does appear to be extended
[Tue Jan  3 21:36:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 18:24:32 2012] XMMSAS src. selection expression = ellipse(24887.882000, 28173.620000, 877.206025, 877.206025, 0.000000, X, Y)
[Thu Jan  5 18:24:32 2012] Writing source region out to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src10_src.reg
[Thu Jan  5 18:24:32 2012] Extracting stamp from image fullrun_mos2_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (236, 274) - (337, 375)
[Thu Jan  5 18:24:32 2012] XMMSAS bgd. selection expression = annulus(24887.882000, 28173.620000, 1462.010042, 2924.020084, X, Y) && !ellipse(25502.038000, 27765.605400, 1163.568033, 1163.568033, 0.000000, X, Y) && !ellipse(25113.799408, 27774.991028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.868000, 27034.443400, 1193.672034, 1193.672034, 0.000000, X, Y) && !ellipse(29587.986000, 26557.555600, 1933.272056, 807.800023, 14.259000, X, Y) && !ellipse(21326.090000, 28972.729000, 1464.824042, 1464.824042, 0.000000, X, Y) && !ellipse(23585.147086, 28645.893096, 2415.744070, 1310.044271, 18.816043, X, Y) && !ellipse(21927.096000, 28746.733504, 1333.944038, 639.304018, 204.235000, X, Y) && !ellipse(22248.359039, 28660.276031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28241.925720, 26764.455017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.606000, 28126.014000, 1216.096035, 463.824013, 46.497000, X, Y) && !ellipse(26326.794678, 28425.850220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.383698, 27439.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.772000, 29293.234000, 2813.232081, 2813.232081, 0.000000, X, Y) && !ellipse(27870.406000, 27862.402000, 1250.192036, 1250.192036, 0.000000, X, Y) && !ellipse(25949.964000, 29420.931000, 1270.880037, 1270.880037, 0.000000, X, Y) && !ellipse(27071.734833, 28479.688904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25598.188263, 29281.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.719635, 31671.079254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.044000, 33797.660000, 3088.896089, 3088.896089, 0.000000, X, Y) && !ellipse(25240.492096, 31434.980774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.868000, 29182.546000, 1216.096035, 1216.096035, 0.000000, X, Y) && !ellipse(23843.204000, 32803.764000, 3098.176089, 3000.744086, 0.236000, X, Y) && !ellipse(28181.545044, 29863.094574, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 18:24:32 2012] Writing fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src10.gif
[Thu Jan  5 18:31:11 2012] Mean detx,y = (432.97, 673.59) 
[Thu Jan  5 18:31:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 18:31:40 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 18:31:40 2012] Setting source spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jan  5 18:31:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jan  6 08:07:11 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:11 2012] Error reading totcts from fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jan  6 08:07:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:21 2012] Using photon index=1.80, rate=0.00454, arf fullrun_mos2_xmm0504810301_pi300-10000_pass1_cl_src10.arf
[Fri Jan  6 08:07:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:21 2012] Updating source flux to 4.3e-14
[Fri Jan  6 08:17:52 2012] Flag c found in src. 10 procflags, skipping spectral fitting