[Sat Dec 31 13:36:05 2011] Detection parameters:
  Position = (297.6, 363.8) = 14 41 58.73 -62 9 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.9 +/- 21.2
  Background counts = 119.4
  Rate = 0.002 +/- 0.0003

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 4.74'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Sun Jan  1 01:12:24 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 8.80"
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src82.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src82.csv
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src82_1.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src82.csv
[Sun Jan  1 11:59:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:28 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Sun Jan  1 11:59:28 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Sun Jan  1 11:59:28 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Sun Jan  1 23:38:22 2012] Warning, spatial fit 82 centroid is now closest to src. 82
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 15:34:19 2012] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:19 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Mon Jan  2 15:34:19 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Mon Jan  2 15:34:19 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 8.80"
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src77.ximg exists
[Tue Jan  3 05:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src77.csv
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src77_1.ximg exists
[Tue Jan  3 05:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src77.csv
[Tue Jan  3 05:59:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Tue Jan  3 05:59:05 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Tue Jan  3 21:36:08 2012] Spatial fit model total counts = 1531.700000, observed total counts = 1530.000000
[Tue Jan  3 21:36:08 2012] Offset between fit and detection position for source 84 = 0.960291 pixels
[Tue Jan  3 21:36:08 2012] 1501.377000 total counts/ 1371.930000 bgd. counts: snr = 3.494830
Spatial fit parameters:
  Offset between fit and detection position for source 84 = 0.960291 pixels
  Position = (298.5, 363.5) = 14 41 58.17 -62 9 58.5
  Extent = 8.1 (4.4-17.6)", rotation angle = 0
  Source counts = 129.4 +/- 38.7
  Background counts = 1371.9
  Rate = 0.002 +/- 0.0005
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 00:28:38 2012] XMMSAS src. selection expression = ellipse(25925.133400, 31572.508400, 487.300214, 487.300214, 0.000000, X, Y)
[Thu Jan  5 00:28:38 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src84_src.reg
[Thu Jan  5 00:28:38 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (271, 335) - (327, 391)
[Thu Jan  5 00:28:38 2012] XMMSAS bgd. selection expression = annulus(25925.133400, 31572.508400, 812.167023, 1624.334047, X, Y) && !ellipse(25146.754000, 28261.476000, 1766.600051, 1766.600051, 0.000000, X, Y) && !ellipse(23555.278000, 28708.942000, 1729.528050, 1729.528050, 0.000000, X, Y) && !ellipse(23060.878600, 28673.886800, 1298.824037, 1298.824037, 0.000000, X, Y) && !ellipse(22506.876000, 28890.961200, 1890.424054, 1890.424054, 0.000000, X, Y) && !ellipse(24262.500000, 33517.730320, 1544.768044, 1544.768044, 0.000000, X, Y) && !ellipse(25574.032000, 33317.050800, 1122.264032, 1122.264032, 0.000000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(25768.046417, 32765.670837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.422000, 32753.959200, 1505.616043, 1505.616043, 0.000000, X, Y) && !ellipse(27564.457825, 33877.156372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.045600, 29472.635600, 1270.024037, 1270.024037, 0.000000, X, Y) && !ellipse(23551.062439, 33357.126404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.579315, 29566.692413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.154000, 33460.074000, 1570.616045, 1570.616045, 0.000000, X, Y) && !ellipse(26156.263000, 34411.002600, 1576.208045, 1576.208045, 0.000000, X, Y) && !ellipse(25269.211548, 29483.789124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.494507, 29353.559937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24790.706000, 31336.168600, 1412.936041, 1412.936041, 0.000000, X, Y) && !ellipse(27216.327200, 29600.795000, 1290.448037, 1290.448037, 0.000000, X, Y) && !ellipse(28038.242000, 34392.770000, 1569.032045, 1569.032045, 0.000000, X, Y)
[Thu Jan  5 00:28:38 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src84.gif
[Thu Jan  5 04:12:32 2012] Mean detx,y = (2750.05, 2444.47) 
[Thu Jan  5 04:12:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 04:12:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 04:12:53 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Thu Jan  5 04:12:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src84_bgd.pi.gz
[Fri Jan  6 08:07:04 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:04 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Fri Jan  6 08:07:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:10 2012] Using photon index=1.80, rate=0.0018, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src84.arf
[Fri Jan  6 08:07:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:10 2012] Updating source flux to 2e-14