[Sat Dec 31 13:36:05 2011] Detection parameters:
  Position = (363.0, 378.9) = 14 41 18.19 -62 8 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.9 +/- 17.3
  Background counts = 80.1
  Rate = 0.003 +/- 0.0004

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 7.48'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Sun Jan  1 01:12:24 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.932
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 10.17"
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src50.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src50.csv
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src50_1.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src50.csv
[Sun Jan  1 11:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sun Jan  1 11:59:27 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Sun Jan  1 23:38:22 2012] Source 78 is offset by 7.064564 and -4.251481 pixels which is larger than
2 X fitted extent = 3.326437 x 3.326437, not incorporating fit results
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:22 2012] Source is confused with source 69
[Mon Jan  2 15:34:18 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Mon Jan  2 15:34:18 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.932
[Mon Jan  2 15:34:18 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 10.17"
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src48.ximg exists
[Tue Jan  3 05:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src48.csv
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src48_1.ximg exists
[Tue Jan  3 05:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src48.csv
[Tue Jan  3 05:59:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 05:59:03 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Tue Jan  3 05:59:03 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Tue Jan  3 05:59:03 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Tue Jan  3 21:36:08 2012] Spatial fit model total counts = 1136.860000, observed total counts = 1131.000000
[Tue Jan  3 21:36:08 2012] Offset between fit and detection position for source 78 = 5.738075 pixels
[Tue Jan  3 21:36:08 2012] 1125.298000 total counts/ 657.646000 bgd. counts: snr = 18.235879
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 5.738075 pixels
  Position = (365.9, 374.0) = 14 41 16.36 -62 9 12.3
  Extent = 20.3 (20.3-40.7)", rotation angle = 0
  Source counts = 467.7 +/- 33.5
  Background counts = 657.6
  Rate = 0.006 +/- 0.0005
[Tue Jan  3 21:36:08 2012] Spatial fit model total counts = 1933.270000, observed total counts = 1940.000000
[Tue Jan  3 21:36:08 2012] Offset between fit and detection position for source 78 = 5.512922 pixels
[Tue Jan  3 21:36:08 2012] Warning, changing simple spatial fit ID from 48 to 88
[Tue Jan  3 21:36:08 2012] 1695.627000 total counts/ 984.191000 bgd. counts: snr = 22.677551
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 5.512922 pixels
  Position = (361.0, 376.5) = 14 41 19.40 -62 9 1.3
  Extent = 33.2 (32.6-66.5)" x 18.1 (15.6-21.1)", rotation angle = 36 (27-44) degrees
  Source counts = 711.4 +/- 41.2
  Background counts = 984.2
  Rate = 0.01 +/- 0.0006
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54
[Tue Jan  3 21:36:08 2012] Source is asymmetric
[Thu Jan  5 00:28:31 2012] XMMSAS src. selection expression = ellipse(31358.642000, 32710.222000, 1994.916057, 1085.172031, 35.846000, X, Y)
[Thu Jan  5 00:28:31 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src78_src.reg
[Thu Jan  5 00:28:31 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (246, 262) - (476, 491)
[Thu Jan  5 00:28:32 2012] XMMSAS bgd. selection expression = annulus(31358.642000, 32710.222000, 3324.860096, 6649.720191, X, Y) && !ellipse(25537.510400, 27863.474200, 1672.360048, 1672.360048, 0.000000, X, Y) && !ellipse(25146.754000, 28261.476000, 1766.600051, 1766.600051, 0.000000, X, Y) && !ellipse(26630.126000, 27288.634000, 1134.040033, 1134.040033, 0.000000, X, Y) && !ellipse(27929.514000, 26762.842000, 2312.016067, 2312.016067, 0.000000, X, Y) && !ellipse(31678.328000, 26104.266000, 1312.064038, 1312.064038, 0.000000, X, Y) && !ellipse(23555.278000, 28708.942000, 1729.528050, 1729.528050, 0.000000, X, Y) && !ellipse(31809.885400, 26209.721800, 1413.792041, 1413.792041, 0.000000, X, Y) && !ellipse(30745.900000, 26555.160000, 1559.608045, 1559.608045, 0.000000, X, Y) && !ellipse(28970.440000, 26808.542000, 506.057615, 506.057615, 0.000000, X, Y) && !ellipse(29493.952000, 26578.658200, 2344.112067, 2344.112067, 0.000000, X, Y) && !ellipse(32922.186000, 26036.512000, 2179.616063, 2179.616063, 0.000000, X, Y) && !ellipse(33576.546000, 26439.942000, 1575.712045, 882.120025, 318.795000, X, Y) && !ellipse(29244.592224, 27337.768768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32451.731600, 27236.226000, 1456.408042, 1456.408042, 0.000000, X, Y) && !ellipse(30448.954000, 27697.570000, 1344.896039, 490.825614, 43.300400, X, Y) && !ellipse(28380.377533, 27616.241516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30678.241669, 27437.053589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.806274, 28256.209778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24262.500000, 33517.730320, 1544.768044, 1544.768044, 0.000000, X, Y) && !ellipse(28156.619629, 28410.825409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30831.852540, 33282.361200, 732.223221, 732.223221, 0.000000, X, Y) && !ellipse(25574.032000, 33317.050800, 1122.264032, 1122.264032, 0.000000, X, Y) && !ellipse(34325.732000, 27123.284000, 1823.184052, 1823.184052, 0.000000, X, Y) && !ellipse(32374.738000, 28707.877200, 2121.680061, 2121.680061, 0.000000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(25768.046417, 32765.670837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.422000, 32753.959200, 1505.616043, 1505.616043, 0.000000, X, Y) && !ellipse(27564.457825, 33877.156372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32136.228000, 28769.506000, 3253.760094, 3253.760094, 0.000000, X, Y) && !ellipse(24299.642000, 26187.310000, 1120.384032, 1120.384032, 0.000000, X, Y) && !ellipse(26027.045600, 29472.635600, 1270.024037, 1270.024037, 0.000000, X, Y) && !ellipse(29614.932000, 28632.136000, 1286.528037, 1286.528037, 0.000000, X, Y) && !ellipse(25540.563507, 34102.501984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24726.579315, 29566.692413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32859.531433, 32742.083557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.154000, 33460.074000, 1570.616045, 1570.616045, 0.000000, X, Y) && !ellipse(31132.429400, 28753.016400, 575.575217, 575.575217, 0.000000, X, Y) && !ellipse(26156.263000, 34411.002600, 1576.208045, 1576.208045, 0.000000, X, Y) && !ellipse(25269.211548, 29483.789124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.494507, 29353.559937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32969.172000, 28469.180000, 1514.320044, 1514.320044, 0.000000, X, Y) && !ellipse(25925.133400, 31572.508400, 649.733619, 649.733619, 0.000000, X, Y) && !ellipse(32009.922058, 29166.728180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28531.000200, 33741.046000, 957.736028, 957.736028, 0.000000, X, Y) && !ellipse(24790.706000, 31336.168600, 1412.936041, 1412.936041, 0.000000, X, Y) && !ellipse(29020.462616, 28224.360046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.327200, 29600.795000, 1290.448037, 1290.448037, 0.000000, X, Y) && !ellipse(28038.242000, 34392.770000, 1569.032045, 1569.032045, 0.000000, X, Y) && !ellipse(31924.158600, 30015.034000, 1489.064043, 1489.064043, 0.000000, X, Y) && !ellipse(30617.552000, 33236.334000, 1329.944038, 1329.944038, 0.000000, X, Y) && !ellipse(32304.104000, 31497.710000, 1349.712039, 1349.712039, 0.000000, X, Y) && !ellipse(34794.636261, 35403.599091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37177.543640, 34173.269135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29017.474000, 29788.057600, 1369.032039, 1369.032039, 0.000000, X, Y)
[Thu Jan  5 00:28:32 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src78.gif
[Thu Jan  5 03:35:28 2012] Mean detx,y = (-107.82, 7159.27) 
[Thu Jan  5 03:35:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 03:36:23 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 03:36:23 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Thu Jan  5 03:36:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Fri Jan  6 08:07:01 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:01 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Fri Jan  6 08:07:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:08 2012] Using photon index=1.80, rate=0.00987, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src78.arf
[Fri Jan  6 08:07:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:08 2012] Updating source flux to 1.3e-13
[Fri Jan  6 08:07:34 2012] Flag b found in src. 78 procflags, skipping spectral fitting
[Fri Jan  6 08:07:34 2012] Flag c found in src. 78 procflags, skipping spectral fitting