[Sat Dec 31 13:36:04 2011] Detection parameters:
  Position = (288.8, 383.0) = 14 42 4.25 -62 8 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.7 +/- 20.1
  Background counts = 82.4
  Rate = 0.004 +/- 0.0004

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 6.17'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Sun Jan  1 01:12:24 2012] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.727
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.51"
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src45.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src45.csv
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src45_1.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src45.csv
[Sun Jan  1 11:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sun Jan  1 11:59:27 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sun Jan  1 23:38:22 2012] Spatial fit model total counts = 1612.430000, observed total counts = 1612.000000
[Sun Jan  1 23:38:22 2012] Offset between fit and detection position for source 70 = 5.782102 pixels
[Sun Jan  1 23:38:22 2012] 1493.007000 total counts/ 1316.080000 bgd. counts: snr = 4.877002
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 5.782102 pixels
  Position = (294.5, 383.5) = 14 42 0.68 -62 8 31.3
  Extent = 14.0 (9.3-19.0)", rotation angle = 0
  Source counts = 176.9 +/- 38.6
  Background counts = 1316.1
  Rate = 0.002 +/- 0.0005
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:22 2012] Source is confused with source 74
[Sun Jan  1 23:38:22 2012] Source is confused with source 63
[Mon Jan  2 15:34:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Mon Jan  2 15:34:18 2012] source mask rpix=3.2, npix_max = 55, mask sum = 23, frac = 0.414
[Mon Jan  2 15:34:18 2012] Skipping simple spatial due to low active detector fraction
[Tue Jan  3 21:36:08 2012] Source 70 is offset by -2.744092 and -2.818371 pixels which is larger than
2 X fitted extent = 2.219494 x 2.219494, not incorporating fit results
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 00:28:30 2012] XMMSAS src. selection expression = ellipse(25574.032000, 33317.050800, 841.698024, 841.698024, 0.000000, X, Y)
[Thu Jan  5 00:28:30 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src70_src.reg
[Thu Jan  5 00:28:30 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (246, 335) - (343, 432)
[Thu Jan  5 00:28:31 2012] XMMSAS bgd. selection expression = annulus(25574.032000, 33317.050800, 1402.830040, 2805.660081, X, Y) && !ellipse(22506.876000, 28890.961200, 1890.424054, 1890.424054, 0.000000, X, Y) && !ellipse(19996.522000, 34556.202400, 3465.568100, 1055.560030, 357.753000, X, Y) && !ellipse(24262.500000, 33517.730320, 1544.768044, 1544.768044, 0.000000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(25768.046417, 32765.670837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.422000, 32753.959200, 1505.616043, 1505.616043, 0.000000, X, Y) && !ellipse(27564.457825, 33877.156372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.000000, 34446.131805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.045600, 29472.635600, 1270.024037, 1270.024037, 0.000000, X, Y) && !ellipse(22020.416200, 34211.953520, 1348.440039, 299.815209, 69.311000, X, Y) && !ellipse(25540.563507, 34102.501984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23551.062439, 33357.126404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.154000, 33460.074000, 1570.616045, 1570.616045, 0.000000, X, Y) && !ellipse(26156.263000, 34411.002600, 1576.208045, 1576.208045, 0.000000, X, Y) && !ellipse(25925.133400, 31572.508400, 649.733619, 649.733619, 0.000000, X, Y) && !ellipse(28531.000200, 33741.046000, 957.736028, 957.736028, 0.000000, X, Y) && !ellipse(24790.706000, 31336.168600, 1412.936041, 1412.936041, 0.000000, X, Y) && !ellipse(27216.327200, 29600.795000, 1290.448037, 1290.448037, 0.000000, X, Y) && !ellipse(28038.242000, 34392.770000, 1569.032045, 1569.032045, 0.000000, X, Y) && !ellipse(29017.474000, 29788.057600, 1369.032039, 1369.032039, 0.000000, X, Y)
[Thu Jan  5 00:28:31 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src70.gif
[Thu Jan  5 03:13:20 2012] Mean detx,y = (4270.92, 3337.57) 
[Thu Jan  5 03:13:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 03:13:57 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 03:13:57 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Thu Jan  5 03:13:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Fri Jan  6 08:07:01 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:01 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Fri Jan  6 08:07:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:08 2012] Using photon index=1.80, rate=0.00246, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src70.arf
[Fri Jan  6 08:07:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:08 2012] Updating source flux to 2.7e-14
[Fri Jan  6 08:07:34 2012] Flag b found in src. 70 procflags, skipping spectral fitting
[Fri Jan  6 08:07:34 2012] Flag c found in src. 70 procflags, skipping spectral fitting