[Sat Dec 31 13:36:04 2011] Detection parameters:
  Position = (271.3, 384.0) = 14 42 15.10 -62 8 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.8 +/- 22.0
  Background counts = 99.4
  Rate = 0.003 +/- 0.0004

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 6.51'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Sun Jan  1 01:12:24 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 9.68"
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src71.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src71.csv
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src71_1.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src71.csv
[Sun Jan  1 11:59:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:28 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sun Jan  1 11:59:28 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sun Jan  1 11:59:28 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Sun Jan  1 23:38:22 2012] Warning, spatial fit 71 centroid is now closest to src. 76
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:22 2012] Source is confused with source 71
[Mon Jan  2 15:34:18 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Mon Jan  2 15:34:18 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Mon Jan  2 15:34:18 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 9.68"
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src67.ximg exists
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src67_1.ximg exists
[Tue Jan  3 05:59:00 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src67 appears to have run properly
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Tue Jan  3 05:59:04 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Tue Jan  3 21:36:08 2012] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 13.165218 pixels away
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 00:28:34 2012] XMMSAS src. selection expression = ellipse(23551.062439, 33357.126404, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 00:28:34 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src68_src.reg
[Thu Jan  5 00:28:34 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (234, 346) - (309, 421)
[Thu Jan  5 00:28:35 2012] XMMSAS bgd. selection expression = annulus(23551.062439, 33357.126404, 1087.500000, 2175.000000, X, Y) && !ellipse(19626.734000, 29282.117800, 3034.392087, 3034.392087, 0.000000, X, Y) && !ellipse(19996.522000, 34556.202400, 3465.568100, 1055.560030, 357.753000, X, Y) && !ellipse(20300.134000, 34704.177000, 1732.784050, 1732.784050, 0.000000, X, Y) && !ellipse(24262.500000, 33517.730320, 1544.768044, 1544.768044, 0.000000, X, Y) && !ellipse(25574.032000, 33317.050800, 1122.264032, 1122.264032, 0.000000, X, Y) && !ellipse(21562.596200, 34819.560140, 700.042420, 700.042420, 0.000000, X, Y) && !ellipse(25768.046417, 32765.670837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.422000, 32753.959200, 1505.616043, 1505.616043, 0.000000, X, Y) && !ellipse(20597.266000, 32634.040000, 1587.784046, 1587.784046, 0.000000, X, Y) && !ellipse(22528.000000, 34446.131805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21218.461227, 32865.322052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22020.416200, 34211.953520, 1348.440039, 299.815209, 69.311000, X, Y) && !ellipse(25540.563507, 34102.501984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.154000, 33460.074000, 1570.616045, 1570.616045, 0.000000, X, Y) && !ellipse(26156.263000, 34411.002600, 1576.208045, 1576.208045, 0.000000, X, Y) && !ellipse(25925.133400, 31572.508400, 649.733619, 649.733619, 0.000000, X, Y) && !ellipse(24790.706000, 31336.168600, 1412.936041, 1412.936041, 0.000000, X, Y) && !ellipse(21510.770660, 33787.780121, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 00:28:35 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src68.gif
[Thu Jan  5 03:59:18 2012] Mean detx,y = (5633.75, 1941.31) 
[Thu Jan  5 03:59:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 03:59:48 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 03:59:49 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Thu Jan  5 03:59:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Thu Jan  5 16:42:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jan  5 16:42:06 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:07:03 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:03 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Fri Jan  6 08:07:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:09 2012] Using photon index=1.80, rate=0.00268, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src68.arf
[Fri Jan  6 08:07:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:09 2012] Updating source flux to 3.3e-14
[Fri Jan  6 08:07:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting