[Sat Dec 31 13:36:04 2011] Detection parameters:
  Position = (317.4, 390.0) = 14 41 46.48 -62 8 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.6 +/- 19.1
  Background counts = 69.7
  Rate = 0.003 +/- 0.0004

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 6.78'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 9.82"
[Sun Jan  1 01:12:24 2012] source mask rpix=2.3, npix_max = 30, mask sum = 20, frac = 0.658
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 9.82"
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src59.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src59.csv
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src59_1.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src59.csv
[Sun Jan  1 11:59:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sun Jan  1 11:59:27 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sun Jan  1 23:38:22 2012] Warning, spatial fit 59 centroid is now closest to src. 57
[Sun Jan  1 23:38:22 2012] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 65 at 11.803326 pixels away
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:22 2012] Source is confused with source 57
[Mon Jan  2 15:34:18 2012] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 9.82"
[Mon Jan  2 15:34:18 2012] source mask rpix=2.3, npix_max = 30, mask sum = 20, frac = 0.658
[Mon Jan  2 15:34:18 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 9.82"
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src55.ximg exists
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src55_1.ximg exists
[Tue Jan  3 05:59:00 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src55 appears to have run properly
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Tue Jan  3 05:59:04 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Tue Jan  3 21:36:08 2012] Warning, spatial fit 55 centroid is now closest to src. 72
[Tue Jan  3 21:36:08 2012] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 65 at 11.803326 pixels away
[Tue Jan  3 21:36:08 2012] Source 65 is offset by -2.051818 and 9.507935 pixels which is larger than
2 X fitted extent = 1.069733 x 1.069733, not incorporating fit results
[Tue Jan  3 21:36:08 2012] Warning: source 86 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 65 at 26.946391 pixels away
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 00:28:32 2012] XMMSAS src. selection expression = ellipse(27564.457825, 33877.156372, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 00:28:32 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src65_src.reg
[Thu Jan  5 00:28:32 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (280, 352) - (355, 427)
[Thu Jan  5 00:28:32 2012] XMMSAS bgd. selection expression = annulus(27564.457825, 33877.156372, 1087.500000, 2175.000000, X, Y) && !ellipse(24262.500000, 33517.730320, 1544.768044, 1544.768044, 0.000000, X, Y) && !ellipse(25574.032000, 33317.050800, 1122.264032, 1122.264032, 0.000000, X, Y) && !ellipse(31358.642000, 32710.222000, 2659.888077, 1446.896042, 35.846000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(25768.046417, 32765.670837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.422000, 32753.959200, 1505.616043, 1505.616043, 0.000000, X, Y) && !ellipse(32136.228000, 28769.506000, 3253.760094, 3253.760094, 0.000000, X, Y) && !ellipse(25540.563507, 34102.501984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.154000, 33460.074000, 1570.616045, 1570.616045, 0.000000, X, Y) && !ellipse(26156.263000, 34411.002600, 1576.208045, 1576.208045, 0.000000, X, Y) && !ellipse(25925.133400, 31572.508400, 649.733619, 649.733619, 0.000000, X, Y) && !ellipse(28531.000200, 33741.046000, 957.736028, 957.736028, 0.000000, X, Y) && !ellipse(24790.706000, 31336.168600, 1412.936041, 1412.936041, 0.000000, X, Y) && !ellipse(28038.242000, 34392.770000, 1569.032045, 1569.032045, 0.000000, X, Y) && !ellipse(30617.552000, 33236.334000, 1329.944038, 1329.944038, 0.000000, X, Y)
[Thu Jan  5 00:28:32 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src65.gif
[Thu Jan  5 03:41:32 2012] Mean detx,y = (3294.03, 5216.04) 
[Thu Jan  5 03:41:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 03:41:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 03:41:55 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Thu Jan  5 03:41:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Thu Jan  5 15:58:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jan  5 15:58:46 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:07:02 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:02 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Fri Jan  6 08:07:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:09 2012] Using photon index=1.80, rate=0.00301, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src65.arf
[Fri Jan  6 08:07:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:09 2012] Updating source flux to 3.6e-14
[Fri Jan  6 08:07:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting