[Sat Dec 31 13:36:04 2011] Detection parameters:
  Position = (302.9, 396.0) = 14 41 55.48 -62 7 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.0 +/- 15.8
  Background counts = 65.9
  Rate = 0.002 +/- 0.0003

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 7.08'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Sun Jan  1 01:12:24 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.770
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 9.97"
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src76.ximg exists
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src76_1.ximg exists
[Sun Jan  1 11:59:24 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src76 appears to have run properly
[Sun Jan  1 11:59:28 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Sun Jan  1 11:59:28 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Sun Jan  1 11:59:28 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Sun Jan  1 23:38:22 2012] Warning, spatial fit 76 centroid is now closest to src. 72
[Sun Jan  1 23:38:22 2012] Warning: source 92 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 11.647756 pixels away
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 15:34:18 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Mon Jan  2 15:34:18 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.770
[Mon Jan  2 15:34:18 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 9.97"
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src72.ximg exists
[Tue Jan  3 05:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src72.csv
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src72_1.ximg exists
[Tue Jan  3 05:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src72.csv
[Tue Jan  3 05:59:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Tue Jan  3 05:59:04 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Tue Jan  3 21:36:08 2012] Spatial fit model total counts = 1121.740000, observed total counts = 1120.000000
[Tue Jan  3 21:36:08 2012] Offset between fit and detection position for source 59 = 6.974190 pixels
[Tue Jan  3 21:36:08 2012] Warning, changing simple spatial fit ID from 72 to 65
[Tue Jan  3 21:36:08 2012] 1064.485000 total counts/ 840.715000 bgd. counts: snr = 7.717515
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 6.974190 pixels
  Position = (296.7, 399.2) = 14 41 59.32 -62 7 22.9
  Extent = 19.7 (19.6-39.4)", rotation angle = 0
  Source counts = 223.8 +/- 32.6
  Background counts = 840.7
  Rate = 0.003 +/- 0.0005
[Tue Jan  3 21:36:08 2012] Spatial fit model total counts = 901.970000, observed total counts = 900.000000
[Tue Jan  3 21:36:08 2012] Offset between fit and detection position for source 59 = 5.501825 pixels
[Tue Jan  3 21:36:08 2012] Warning, changing simple spatial fit ID from 65 to 72
[Tue Jan  3 21:36:08 2012] 878.110000 total counts/ 690.656000 bgd. counts: snr = 7.132862
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 5.501825 pixels
  Position = (301.2, 396.1) = 14 41 56.52 -62 7 36.6
  Extent = 19.7 (19.2-19.9)", rotation angle = 0
  Source counts = 187.5 +/- 29.6
  Background counts = 690.7
  Rate = 0.003 +/- 0.0004
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 21:36:08 2012] Source is confused with source 63
[Thu Jan  5 00:28:36 2012] XMMSAS src. selection expression = ellipse(26156.263000, 34411.002600, 1182.156034, 1182.156034, 0.000000, X, Y)
[Thu Jan  5 00:28:36 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src59_src.reg
[Thu Jan  5 00:28:36 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (233, 328) - (369, 464)
[Thu Jan  5 00:28:36 2012] XMMSAS bgd. selection expression = annulus(26156.263000, 34411.002600, 1970.260057, 3940.520113, X, Y) && !ellipse(22506.876000, 28890.961200, 1890.424054, 1890.424054, 0.000000, X, Y) && !ellipse(19626.734000, 29282.117800, 3034.392087, 3034.392087, 0.000000, X, Y) && !ellipse(21668.013443, 29610.224274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19996.522000, 34556.202400, 3465.568100, 1055.560030, 357.753000, X, Y) && !ellipse(24262.500000, 33517.730320, 1544.768044, 1544.768044, 0.000000, X, Y) && !ellipse(25574.032000, 33317.050800, 1122.264032, 1122.264032, 0.000000, X, Y) && !ellipse(31358.642000, 32710.222000, 2659.888077, 1446.896042, 35.846000, X, Y) && !ellipse(21562.596200, 34819.560140, 700.042420, 700.042420, 0.000000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(25768.046417, 32765.670837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.422000, 32753.959200, 1505.616043, 1505.616043, 0.000000, X, Y) && !ellipse(27564.457825, 33877.156372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.000000, 34446.131805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32136.228000, 28769.506000, 3253.760094, 3253.760094, 0.000000, X, Y) && !ellipse(26027.045600, 29472.635600, 1270.024037, 1270.024037, 0.000000, X, Y) && !ellipse(22020.416200, 34211.953520, 1348.440039, 299.815209, 69.311000, X, Y) && !ellipse(25540.563507, 34102.501984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23551.062439, 33357.126404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.154000, 33460.074000, 1570.616045, 1570.616045, 0.000000, X, Y) && !ellipse(25925.133400, 31572.508400, 649.733619, 649.733619, 0.000000, X, Y) && !ellipse(28531.000200, 33741.046000, 957.736028, 957.736028, 0.000000, X, Y) && !ellipse(24790.706000, 31336.168600, 1412.936041, 1412.936041, 0.000000, X, Y) && !ellipse(21510.770660, 33787.780121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.327200, 29600.795000, 1290.448037, 1290.448037, 0.000000, X, Y) && !ellipse(28038.242000, 34392.770000, 1569.032045, 1569.032045, 0.000000, X, Y) && !ellipse(30617.552000, 33236.334000, 1329.944038, 1329.944038, 0.000000, X, Y) && !ellipse(29017.474000, 29788.057600, 1369.032039, 1369.032039, 0.000000, X, Y)
[Thu Jan  5 00:28:36 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src59.gif
[Thu Jan  5 04:02:42 2012] Mean detx,y = (4637.79, 4462.00) 
[Thu Jan  5 04:02:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 04:04:01 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 04:04:01 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Thu Jan  5 04:04:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Fri Jan  6 08:07:03 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:03 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Fri Jan  6 08:07:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:10 2012] Using photon index=1.80, rate=0.0026, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src59.arf
[Fri Jan  6 08:07:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:10 2012] Updating source flux to 2.8e-14
[Fri Jan  6 08:07:34 2012] Flag c found in src. 59 procflags, skipping spectral fitting