[Sat Dec 31 13:36:02 2011] Detection parameters:
  Position = (166.7, 334.0) = 14 43 20.15 -62 12 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 765.4 +/- 38.6
  Background counts = 120.5
  Rate = 0.01 +/- 0.0005

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 9.89'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Sun Jan  1 01:12:24 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.928
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 11.38"
[Sun Jan  1 11:59:22 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src20.ximg exists
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Jan  1 11:59:23 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src20 appears to have run properly
[Sun Jan  1 11:59:26 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Jan  1 11:59:26 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Jan  1 11:59:26 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Jan  1 23:38:21 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.609614 pixels away
[Sun Jan  1 23:38:22 2012] Spatial fit model total counts = 1982.600000, observed total counts = 1982.000000
[Sun Jan  1 23:38:22 2012] Offset between fit and detection position for source 4 = 2.099328 pixels
[Sun Jan  1 23:38:22 2012] Warning, changing simple spatial fit ID from 20 to 54
[Sun Jan  1 23:38:22 2012] 2037.792000 total counts/ 1374.310000 bgd. counts: snr = 17.897270
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.099328 pixels
  Position = (165.7, 335.9) = 14 43 20.80 -62 11 57.1
  Extent = 13.3 (11.2-15.6)", rotation angle = 0
  Source counts = 663.5 +/- 45.1
  Background counts = 1374.3
  Rate = 0.009 +/- 0.0006
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 15:34:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Mon Jan  2 15:34:18 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.967
[Mon Jan  2 15:34:18 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 13.30"
[Tue Jan  3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src20.ximg exists
[Tue Jan  3 05:58:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src20.csv
[Tue Jan  3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Jan  3 05:58:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src20.csv
[Tue Jan  3 05:58:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 05:59:02 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Jan  3 05:59:02 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Jan  3 05:59:02 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Jan  3 21:36:08 2012] Warning, spatial fit 20 centroid is now closest to src. 97
[Tue Jan  3 21:36:08 2012] Spatial fit model total counts = 1978.020000, observed total counts = 1982.000000
[Tue Jan  3 21:36:08 2012] Offset between fit and detection position for source 4 = 0.607429 pixels
[Tue Jan  3 21:36:08 2012] Warning, changing simple spatial fit ID from 20 to 51
[Tue Jan  3 21:36:08 2012] 1997.507000 total counts/ 1335.910000 bgd. counts: snr = 18.101098
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.607429 pixels
  Position = (166.3, 335.9) = 14 43 20.42 -62 11 57.1
  Extent = 12.2 (10.7-14.2)", rotation angle = 0
  Source counts = 661.6 +/- 44.7
  Background counts = 1335.9
  Rate = 0.009 +/- 0.0006
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 00:28:27 2012] XMMSAS src. selection expression = ellipse(14416.730000, 29171.262000, 733.416021, 733.416021, 0.000000, X, Y)
[Thu Jan  5 00:28:27 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src4_src.reg
[Thu Jan  5 00:28:27 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (124, 294) - (208, 378)
[Thu Jan  5 00:28:28 2012] XMMSAS bgd. selection expression = annulus(14416.730000, 29171.262000, 1222.360035, 2444.720070, X, Y) && !ellipse(19626.734000, 29282.117800, 3034.392087, 3034.392087, 0.000000, X, Y) && !ellipse(19996.522000, 34556.202400, 3465.568100, 1055.560030, 357.753000, X, Y) && !ellipse(13240.896000, 29178.132000, 591.340817, 591.340817, 0.000000, X, Y) && !ellipse(16626.996400, 28603.041200, 437.046413, 437.046413, 0.000000, X, Y) && !ellipse(17135.590363, 29124.821198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16652.313800, 29109.602000, 1692.648049, 1692.648049, 0.000000, X, Y) && !ellipse(16117.094000, 29134.204000, 1299.384037, 1299.384037, 0.000000, X, Y) && !ellipse(15038.909744, 29767.062164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15627.954544, 29360.447083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13901.017288, 29865.409760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12778.723129, 29535.007294, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 00:28:28 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src4.gif
[Thu Jan  5 02:34:13 2012] Mean detx,y = (8779.38, -7654.96) 
[Thu Jan  5 02:34:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 02:34:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 02:34:59 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jan  5 02:34:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jan  6 08:06:59 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:06:59 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jan  6 08:07:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:07 2012] Using photon index=1.80, rate=0.00918, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src4.arf
[Fri Jan  6 08:07:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:07 2012] Updating source flux to 1.9e-13