[Sat Dec 31 13:36:03 2011] Detection parameters: Position = (353.2, 315.9) = 14 41 24.17 -62 13 24.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 335.6 +/- 30.7 Background counts = 165.9 Rate = 0.005 +/- 0.0005 [Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 4.17' [Sun Jan 1 01:12:24 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting [Sun Jan 1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 8.51" [Sun Jan 1 01:12:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036 [Sun Jan 1 01:12:24 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.51" [Sun Jan 1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src35.ximg exists [Sun Jan 1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src35.csv [Sun Jan 1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src35_1.ximg exists [Sun Jan 1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src35.csv [Sun Jan 1 11:59:23 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src35_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jan 1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists [Sun Jan 1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists [Sun Jan 1 11:59:27 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly [Sun Jan 1 23:38:21 2012] Source 39 is offset by 2.757031 and 1.501995 pixels which is larger than 2 X fitted extent = 0.927991 x 0.927991, not incorporating fit results [Sun Jan 1 23:38:22 2012] Warning, spatial fit 35 centroid is now closest to src. 42 [Sun Jan 1 23:38:22 2012] Source 39 is offset by 5.635743 and -5.482717 pixels which is larger than 2 X fitted extent = 2.212851 x 2.212851, not incorporating fit results [Sun Jan 1 23:38:22 2012] Vigneting correction estimate = 1.000000 [Sun Jan 1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jan 1 23:38:22 2012] Assessing source extent using major [Sun Jan 1 23:38:22 2012] Source does appear to be extended [Sun Jan 1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jan 1 23:38:22 2012] Source is confused with source 37 [Mon Jan 2 15:34:18 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting [Mon Jan 2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 8.51" [Mon Jan 2 15:34:18 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036 [Mon Jan 2 15:34:18 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 8.51" [Tue Jan 3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src35.ximg exists [Tue Jan 3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src35_1.ximg exists [Tue Jan 3 05:58:59 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src35 appears to have run properly [Tue Jan 3 05:59:03 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Tue Jan 3 05:59:03 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Tue Jan 3 05:59:03 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Tue Jan 3 21:36:08 2012] Source 39 is offset by -4.969452 and 6.473421 pixels which is larger than 2 X fitted extent = 7.026759 x 2.800138, not incorporating fit results [Tue Jan 3 21:36:08 2012] Warning, spatial fit 35 centroid is now closest to src. 42 [Tue Jan 3 21:36:08 2012] Vigneting correction estimate = 1.000000 [Tue Jan 3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jan 3 21:36:08 2012] Assessing source extent using major [Tue Jan 3 21:36:08 2012] Source does appear to be extended [Tue Jan 3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jan 5 00:28:30 2012] XMMSAS src. selection expression = ellipse(30678.241669, 27437.053589, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jan 5 00:28:30 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src39_src.reg [Thu Jan 5 00:28:30 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (316, 278) - (391, 353) [Thu Jan 5 00:28:30 2012] XMMSAS bgd. selection expression = annulus(30678.241669, 27437.053589, 1087.500000, 2175.000000, X, Y) && !ellipse(27929.514000, 26762.842000, 2312.016067, 2312.016067, 0.000000, X, Y) && !ellipse(31678.328000, 26104.266000, 1312.064038, 1312.064038, 0.000000, X, Y) && !ellipse(31809.885400, 26209.721800, 1413.792041, 1413.792041, 0.000000, X, Y) && !ellipse(30745.900000, 26555.160000, 1559.608045, 1559.608045, 0.000000, X, Y) && !ellipse(28970.440000, 26808.542000, 506.057615, 506.057615, 0.000000, X, Y) && !ellipse(29493.952000, 26578.658200, 2344.112067, 2344.112067, 0.000000, X, Y) && !ellipse(32922.186000, 26036.512000, 2179.616063, 2179.616063, 0.000000, X, Y) && !ellipse(33576.546000, 26439.942000, 1575.712045, 882.120025, 318.795000, X, Y) && !ellipse(29244.592224, 27337.768768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32451.731600, 27236.226000, 1456.408042, 1456.408042, 0.000000, X, Y) && !ellipse(30448.954000, 27697.570000, 1344.896039, 490.825614, 43.300400, X, Y) && !ellipse(28380.377533, 27616.241516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.619629, 28410.825409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34325.732000, 27123.284000, 1823.184052, 1823.184052, 0.000000, X, Y) && !ellipse(32374.738000, 28707.877200, 2121.680061, 2121.680061, 0.000000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(32136.228000, 28769.506000, 3253.760094, 3253.760094, 0.000000, X, Y) && !ellipse(29614.932000, 28632.136000, 1286.528037, 1286.528037, 0.000000, X, Y) && !ellipse(31132.429400, 28753.016400, 575.575217, 575.575217, 0.000000, X, Y) && !ellipse(32969.172000, 28469.180000, 1514.320044, 1514.320044, 0.000000, X, Y) && !ellipse(32009.922058, 29166.728180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29020.462616, 28224.360046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.327200, 29600.795000, 1290.448037, 1290.448037, 0.000000, X, Y) && !ellipse(31924.158600, 30015.034000, 1489.064043, 1489.064043, 0.000000, X, Y) && !ellipse(29017.474000, 29788.057600, 1369.032039, 1369.032039, 0.000000, X, Y) [Thu Jan 5 00:28:30 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src39.gif [Thu Jan 5 03:07:10 2012] Mean detx,y = (-3510.94, 3109.86) [Thu Jan 5 03:07:12 2012] Setting backscal keywords in source and bgd. spectrum [Thu Jan 5 03:07:29 2012] Binned source spectrum to 10 counts/bin [Thu Jan 5 03:07:29 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src39_src_b10.pi.gz [Thu Jan 5 03:07:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src39_bgd.pi.gz [Thu Jan 5 14:20:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Jan 5 14:20:50 2012] rmf not generated due to insufficient counts [Fri Jan 6 08:07:00 2012] Updating aperture counts using extracted products [Fri Jan 6 08:07:00 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src39_src_b10.pi.gz [Fri Jan 6 08:07:08 2012] Calculating source flux in energy range 0.30-8.00 [Fri Jan 6 08:07:08 2012] Using photon index=1.80, rate=0.00533, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src39.arf [Fri Jan 6 08:07:08 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jan 6 08:07:08 2012] Updating source flux to 6.1e-14 [Fri Jan 6 08:07:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting