[Sat Dec 31 13:36:03 2011] Detection parameters:
  Position = (326.8, 318.0) = 14 41 40.61 -62 13 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 374.7 +/- 31.9
  Background counts = 160.3
  Rate = 0.006 +/- 0.0005

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 2.50'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Jan  1 01:12:24 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.68"
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src33.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src33.csv
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src33.csv
[Sun Jan  1 11:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:26 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Jan  1 11:59:27 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Jan  1 23:38:22 2012] Source 38 is offset by 5.624133 and 6.044247 pixels which is larger than
2 X fitted extent = 2.385329 x 2.385329, not incorporating fit results
[Sun Jan  1 23:38:22 2012] Source 38 is offset by 5.227535 and -2.818075 pixels which is larger than
2 X fitted extent = 1.272515 x 1.272515, not incorporating fit results
[Sun Jan  1 23:38:22 2012] Source 38 is offset by -0.354212 and -0.978971 pixels which is larger than
2 X fitted extent = 0.924487 x 0.924487, not incorporating fit results
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 15:34:18 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Mon Jan  2 15:34:18 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Mon Jan  2 15:34:18 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.68"
[Tue Jan  3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src33.ximg exists
[Tue Jan  3 05:58:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src33.csv
[Tue Jan  3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Jan  3 05:58:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src33.csv
[Tue Jan  3 05:58:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 05:59:02 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Jan  3 05:59:03 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Jan  3 05:59:03 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Jan  3 21:36:08 2012] Warning, spatial fit 33 centroid is now closest to src. 5
[Tue Jan  3 21:36:08 2012] Source 38 is offset by 5.214339 and -2.818075 pixels which is larger than
2 X fitted extent = 1.286740 x 1.286740, not incorporating fit results
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 21:36:08 2012] Source is confused with source 5
[Thu Jan  5 00:28:29 2012] XMMSAS src. selection expression = ellipse(28380.377533, 27616.241516, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 00:28:29 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src38_src.reg
[Thu Jan  5 00:28:29 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (289, 280) - (364, 355)
[Thu Jan  5 00:28:29 2012] XMMSAS bgd. selection expression = annulus(28380.377533, 27616.241516, 1087.500000, 2175.000000, X, Y) && !ellipse(25537.510400, 27863.474200, 1672.360048, 1672.360048, 0.000000, X, Y) && !ellipse(25146.754000, 28261.476000, 1766.600051, 1766.600051, 0.000000, X, Y) && !ellipse(26630.126000, 27288.634000, 1134.040033, 1134.040033, 0.000000, X, Y) && !ellipse(27929.514000, 26762.842000, 2312.016067, 2312.016067, 0.000000, X, Y) && !ellipse(31678.328000, 26104.266000, 1312.064038, 1312.064038, 0.000000, X, Y) && !ellipse(31809.885400, 26209.721800, 1413.792041, 1413.792041, 0.000000, X, Y) && !ellipse(30745.900000, 26555.160000, 1559.608045, 1559.608045, 0.000000, X, Y) && !ellipse(28970.440000, 26808.542000, 506.057615, 506.057615, 0.000000, X, Y) && !ellipse(29493.952000, 26578.658200, 2344.112067, 2344.112067, 0.000000, X, Y) && !ellipse(29244.592224, 27337.768768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30448.954000, 27697.570000, 1344.896039, 490.825614, 43.300400, X, Y) && !ellipse(30678.241669, 27437.053589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.806274, 28256.209778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.619629, 28410.825409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32374.738000, 28707.877200, 2121.680061, 2121.680061, 0.000000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(32136.228000, 28769.506000, 3253.760094, 3253.760094, 0.000000, X, Y) && !ellipse(26027.045600, 29472.635600, 1270.024037, 1270.024037, 0.000000, X, Y) && !ellipse(29614.932000, 28632.136000, 1286.528037, 1286.528037, 0.000000, X, Y) && !ellipse(25787.494507, 29353.559937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29020.462616, 28224.360046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.327200, 29600.795000, 1290.448037, 1290.448037, 0.000000, X, Y) && !ellipse(31924.158600, 30015.034000, 1489.064043, 1489.064043, 0.000000, X, Y) && !ellipse(29017.474000, 29788.057600, 1369.032039, 1369.032039, 0.000000, X, Y)
[Thu Jan  5 00:28:29 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src38.gif
[Thu Jan  5 03:05:44 2012] Mean detx,y = (-1863.26, 1543.79) 
[Thu Jan  5 03:05:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 03:06:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 03:06:04 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Jan  5 03:06:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Jan  5 14:14:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jan  5 14:14:07 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:07:00 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:00 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jan  6 08:07:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:07 2012] Using photon index=1.80, rate=0.00551, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src38.arf
[Fri Jan  6 08:07:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:08 2012] Updating source flux to 5.6e-14
[Fri Jan  6 08:07:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting