[Sat Dec 31 13:36:02 2011] Detection parameters:
  Position = (216.2, 396.1) = 14 42 49.22 -62 7 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.4 +/- 25.8
  Background counts = 77.3
  Rate = 0.006 +/- 0.0006

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 9.25'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Sun Jan  1 01:12:24 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.973
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 11.05"
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src29.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src29.csv
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src29.csv
[Sun Jan  1 11:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:26 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Jan  1 11:59:26 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Jan  1 11:59:26 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Jan  1 23:38:22 2012] Warning, spatial fit 29 centroid is now closest to src. 15
[Sun Jan  1 23:38:22 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.036685 pixels away
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:22 2012] Source is confused with source 18
[Mon Jan  2 15:34:18 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Mon Jan  2 15:34:18 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.973
[Mon Jan  2 15:34:18 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 11.05"
[Tue Jan  3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src29.ximg exists
[Tue Jan  3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Jan  3 05:58:59 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src29 appears to have run properly
[Tue Jan  3 05:59:02 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Jan  3 05:59:02 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Jan  3 05:59:02 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Jan  3 21:36:08 2012] Spatial fit model total counts = 1855.350000, observed total counts = 1856.000000
[Tue Jan  3 21:36:08 2012] Offset between fit and detection position for source 14 = 0.644510 pixels
[Tue Jan  3 21:36:08 2012] Warning, changing simple spatial fit ID from 29 to 25
[Tue Jan  3 21:36:08 2012] 1008.778000 total counts/ 335.203000 bgd. counts: snr = 36.790188
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.644510 pixels
  Position = (216.7, 396.5) = 14 42 48.95 -62 7 34.1
  Extent = 17.6 (13.1-22.3)", rotation angle = 0
  Source counts = 673.6 +/- 31.8
  Background counts = 335.2
  Rate = 0.009 +/- 0.0004
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 00:28:29 2012] XMMSAS src. selection expression = ellipse(18802.504000, 34450.714800, 1056.894030, 1056.894030, 0.000000, X, Y)
[Thu Jan  5 00:28:29 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src14_src.reg
[Thu Jan  5 00:28:29 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (156, 336) - (277, 457)
[Thu Jan  5 00:28:29 2012] XMMSAS bgd. selection expression = annulus(18802.504000, 34450.714800, 1761.490051, 3522.980101, X, Y) && !ellipse(19626.734000, 29282.117800, 3034.392087, 3034.392087, 0.000000, X, Y) && !ellipse(18450.022000, 34286.310000, 1761.232051, 1761.232051, 0.000000, X, Y) && !ellipse(19996.522000, 34556.202400, 3465.568100, 1055.560030, 357.753000, X, Y) && !ellipse(17920.494000, 34235.322200, 1778.496051, 1778.496051, 0.000000, X, Y) && !ellipse(20300.134000, 34704.177000, 1732.784050, 1732.784050, 0.000000, X, Y) && !ellipse(19052.310000, 34439.822000, 1746.136050, 1746.136050, 0.000000, X, Y) && !ellipse(21562.596200, 34819.560140, 700.042420, 700.042420, 0.000000, X, Y) && !ellipse(20597.266000, 32634.040000, 1587.784046, 1587.784046, 0.000000, X, Y) && !ellipse(22528.000000, 34446.131805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21218.461227, 32865.322052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22020.416200, 34211.953520, 1348.440039, 299.815209, 69.311000, X, Y) && !ellipse(21510.770660, 33787.780121, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 00:28:29 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src14.gif
[Thu Jan  5 03:03:18 2012] Mean detx,y = (9621.59, -844.50) 
[Thu Jan  5 03:03:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 03:03:41 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 03:03:41 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Jan  5 03:03:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Jan  6 08:06:59 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:00 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jan  6 08:07:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:07 2012] Using photon index=1.80, rate=0.00935, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src14.arf
[Fri Jan  6 08:07:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:07 2012] Updating source flux to 1.4e-13
[Fri Jan  6 08:07:34 2012] Flag c found in src. 14 procflags, skipping spectral fitting