[Sat Dec 31 13:36:06 2011] Detection parameters:
  Position = (324.2, 327.1) = 14 41 42.21 -62 12 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.1 +/- 24.4
  Background counts = 147.7
  Rate = 0.004 +/- 0.0004

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 2.79'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Sun Jan  1 01:12:24 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.662
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 7.83"
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src43.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src43.csv
[Sun Jan  1 11:59:23 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Jan  1 11:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src43.csv
[Sun Jan  1 11:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Jan  1 11:59:27 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sun Jan  1 23:38:22 2012] Warning, spatial fit 43 centroid is now closest to src. 38
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 15:34:18 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Mon Jan  2 15:34:18 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.662
[Mon Jan  2 15:34:18 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 7.83"
[Tue Jan  3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src42.ximg exists
[Tue Jan  3 05:58:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src42.csv
[Tue Jan  3 05:58:59 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src42_1.ximg exists
[Tue Jan  3 05:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src42.csv
[Tue Jan  3 05:59:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 05:59:03 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Tue Jan  3 05:59:03 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Tue Jan  3 05:59:03 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Tue Jan  3 21:36:08 2012] Warning, spatial fit 42 centroid is now closest to src. 38
[Tue Jan  3 21:36:08 2012] Source 105 is offset by -3.635958 and 0.951418 pixels which is larger than
2 X fitted extent = 1.854092 x 1.854092, not incorporating fit results
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 21:36:08 2012] Source is confused with source 5
[Thu Jan  5 00:28:30 2012] XMMSAS src. selection expression = ellipse(28156.619629, 28410.825409, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 00:28:30 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src105_src.reg
[Thu Jan  5 00:28:30 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (287, 290) - (362, 365)
[Thu Jan  5 00:28:30 2012] XMMSAS bgd. selection expression = annulus(28156.619629, 28410.825409, 1087.500000, 2175.000000, X, Y) && !ellipse(25537.510400, 27863.474200, 1672.360048, 1672.360048, 0.000000, X, Y) && !ellipse(25146.754000, 28261.476000, 1766.600051, 1766.600051, 0.000000, X, Y) && !ellipse(26630.126000, 27288.634000, 1134.040033, 1134.040033, 0.000000, X, Y) && !ellipse(27929.514000, 26762.842000, 2312.016067, 2312.016067, 0.000000, X, Y) && !ellipse(30745.900000, 26555.160000, 1559.608045, 1559.608045, 0.000000, X, Y) && !ellipse(28970.440000, 26808.542000, 506.057615, 506.057615, 0.000000, X, Y) && !ellipse(29493.952000, 26578.658200, 2344.112067, 2344.112067, 0.000000, X, Y) && !ellipse(29244.592224, 27337.768768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30448.954000, 27697.570000, 1344.896039, 490.825614, 43.300400, X, Y) && !ellipse(28380.377533, 27616.241516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30678.241669, 27437.053589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.806274, 28256.209778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32374.738000, 28707.877200, 2121.680061, 2121.680061, 0.000000, X, Y) && !ellipse(31358.642000, 32710.222000, 2659.888077, 1446.896042, 35.846000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(32136.228000, 28769.506000, 3253.760094, 3253.760094, 0.000000, X, Y) && !ellipse(26027.045600, 29472.635600, 1270.024037, 1270.024037, 0.000000, X, Y) && !ellipse(29614.932000, 28632.136000, 1286.528037, 1286.528037, 0.000000, X, Y) && !ellipse(25269.211548, 29483.789124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.494507, 29353.559937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24790.706000, 31336.168600, 1412.936041, 1412.936041, 0.000000, X, Y) && !ellipse(29020.462616, 28224.360046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.327200, 29600.795000, 1290.448037, 1290.448037, 0.000000, X, Y) && !ellipse(29017.474000, 29788.057600, 1369.032039, 1369.032039, 0.000000, X, Y)
[Thu Jan  5 00:28:30 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src105.gif
[Thu Jan  5 03:12:11 2012] Mean detx,y = (-1127.57, 1905.44) 
[Thu Jan  5 03:12:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 03:12:35 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 03:12:35 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Thu Jan  5 03:12:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Thu Jan  5 14:43:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jan  5 14:43:32 2012] rmf not generated due to insufficient counts
[Fri Jan  6 08:07:01 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:01 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Fri Jan  6 08:07:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:08 2012] Using photon index=1.80, rate=0.00421, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src105.arf
[Fri Jan  6 08:07:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:08 2012] Updating source flux to 4.3e-14
[Fri Jan  6 08:07:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting