[Sat Dec 31 13:36:06 2011] Detection parameters:
  Position = (341.8, 326.9) = 14 41 31.24 -62 12 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.9 +/- 25.1
  Background counts = 163.2
  Rate = 0.003 +/- 0.0004

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 3.76'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Sun Jan  1 01:12:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.861
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 8.31"
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src67.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src67.csv
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src67.csv
[Sun Jan  1 11:59:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun Jan  1 11:59:27 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun Jan  1 11:59:27 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Sun Jan  1 23:38:22 2012] Spatial fit model total counts = 4889.270000, observed total counts = 4895.000000
[Sun Jan  1 23:38:22 2012] Offset between fit and detection position for source 104 = 3.968693 pixels
[Sun Jan  1 23:38:22 2012] Warning, changing simple spatial fit ID from 67 to 28
[Sun Jan  1 23:38:22 2012] 4588.225000 total counts/ 4454.680000 bgd. counts: snr = 2.000872
Spatial fit parameters:
  Offset between fit and detection position for source 104 = 3.968693 pixels
  Position = (343.4, 323.3) = 14 41 30.24 -62 12 53.1
  Extent = 15.9 (15.9-31.7)", rotation angle = 0
  Source counts = 133.5 +/- 67.7
  Background counts = 4454.7
  Rate = 0.002 +/- 0.0009
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:22 2012] Source is confused with source 37
[Mon Jan  2 15:34:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:18 2012] Initial guess for spatial extent in simple fitting = 15.87"
[Mon Jan  2 15:34:18 2012] source mask rpix=3.6, npix_max = 68, mask sum = 72, frac = 1.046
[Mon Jan  2 15:34:18 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 15.87"
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src63.ximg exists
[Tue Jan  3 05:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src63.csv
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src63_1.ximg exists
[Tue Jan  3 05:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src63.csv
[Tue Jan  3 05:59:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Tue Jan  3 05:59:04 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Tue Jan  3 21:36:08 2012] Warning, spatial fit 63 centroid is now closest to src. 42
[Tue Jan  3 21:36:08 2012] Spatial fit model total counts = 2542.300000, observed total counts = 2542.000000
[Tue Jan  3 21:36:08 2012] Offset between fit and detection position for source 104 = 6.834058 pixels
[Tue Jan  3 21:36:08 2012] Warning, changing simple spatial fit ID from 63 to 84
[Tue Jan  3 21:36:08 2012] 2415.395000 total counts/ 2226.270000 bgd. counts: snr = 4.008298
Spatial fit parameters:
  Offset between fit and detection position for source 104 = 6.834058 pixels
  Position = (341.0, 329.7) = 14 41 31.79 -62 12 25.4
  Extent = 16.1 (16.0-32.2)", rotation angle = 0
  Source counts = 189.1 +/- 49.1
  Background counts = 2226.3
  Rate = 0.003 +/- 0.0007
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 00:28:33 2012] XMMSAS src. selection expression = ellipse(29614.932000, 28632.136000, 964.896028, 964.896028, 0.000000, X, Y)
[Thu Jan  5 00:28:34 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src104_src.reg
[Thu Jan  5 00:28:34 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (286, 274) - (396, 385)
[Thu Jan  5 00:28:34 2012] XMMSAS bgd. selection expression = annulus(29614.932000, 28632.136000, 1608.160046, 3216.320093, X, Y) && !ellipse(25537.510400, 27863.474200, 1672.360048, 1672.360048, 0.000000, X, Y) && !ellipse(25146.754000, 28261.476000, 1766.600051, 1766.600051, 0.000000, X, Y) && !ellipse(26630.126000, 27288.634000, 1134.040033, 1134.040033, 0.000000, X, Y) && !ellipse(27929.514000, 26762.842000, 2312.016067, 2312.016067, 0.000000, X, Y) && !ellipse(31678.328000, 26104.266000, 1312.064038, 1312.064038, 0.000000, X, Y) && !ellipse(31809.885400, 26209.721800, 1413.792041, 1413.792041, 0.000000, X, Y) && !ellipse(30745.900000, 26555.160000, 1559.608045, 1559.608045, 0.000000, X, Y) && !ellipse(28970.440000, 26808.542000, 506.057615, 506.057615, 0.000000, X, Y) && !ellipse(29493.952000, 26578.658200, 2344.112067, 2344.112067, 0.000000, X, Y) && !ellipse(32922.186000, 26036.512000, 2179.616063, 2179.616063, 0.000000, X, Y) && !ellipse(33576.546000, 26439.942000, 1575.712045, 882.120025, 318.795000, X, Y) && !ellipse(29244.592224, 27337.768768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32451.731600, 27236.226000, 1456.408042, 1456.408042, 0.000000, X, Y) && !ellipse(30448.954000, 27697.570000, 1344.896039, 490.825614, 43.300400, X, Y) && !ellipse(28380.377533, 27616.241516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30678.241669, 27437.053589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.806274, 28256.209778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.619629, 28410.825409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34325.732000, 27123.284000, 1823.184052, 1823.184052, 0.000000, X, Y) && !ellipse(32374.738000, 28707.877200, 2121.680061, 2121.680061, 0.000000, X, Y) && !ellipse(31358.642000, 32710.222000, 2659.888077, 1446.896042, 35.846000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(32136.228000, 28769.506000, 3253.760094, 3253.760094, 0.000000, X, Y) && !ellipse(26027.045600, 29472.635600, 1270.024037, 1270.024037, 0.000000, X, Y) && !ellipse(31132.429400, 28753.016400, 575.575217, 575.575217, 0.000000, X, Y) && !ellipse(25787.494507, 29353.559937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32969.172000, 28469.180000, 1514.320044, 1514.320044, 0.000000, X, Y) && !ellipse(25925.133400, 31572.508400, 649.733619, 649.733619, 0.000000, X, Y) && !ellipse(32009.922058, 29166.728180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29020.462616, 28224.360046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.327200, 29600.795000, 1290.448037, 1290.448037, 0.000000, X, Y) && !ellipse(31924.158600, 30015.034000, 1489.064043, 1489.064043, 0.000000, X, Y) && !ellipse(32304.104000, 31497.710000, 1349.712039, 1349.712039, 0.000000, X, Y) && !ellipse(29017.474000, 29788.057600, 1369.032039, 1369.032039, 0.000000, X, Y)
[Thu Jan  5 00:28:34 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src104.gif
[Thu Jan  5 03:56:58 2012] Mean detx,y = (-2017.92, 3146.36) 
[Thu Jan  5 03:57:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 03:57:34 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 03:57:34 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Thu Jan  5 03:57:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Fri Jan  6 08:07:03 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:03 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Fri Jan  6 08:07:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:09 2012] Using photon index=1.80, rate=0.00262, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src104.arf
[Fri Jan  6 08:07:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:09 2012] Updating source flux to 2.6e-14
[Fri Jan  6 08:07:34 2012] Flag c found in src. 104 procflags, skipping spectral fitting