[Sat Dec 31 13:36:06 2011] Detection parameters:
  Position = (381.5, 328.1) = 14 41 6.57 -62 12 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.1 +/- 21.5
  Background counts = 147.8
  Rate = 0.002 +/- 0.0004

[Sat Dec 31 13:36:08 2011] Off-axis axis estimate = 6.39'
[Sun Jan  1 01:12:24 2012] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 01:12:24 2012] Initial guess for spatial extent in simple fitting = 9.63"
[Sun Jan  1 01:12:24 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.019
[Sun Jan  1 01:12:24 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 9.63"
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src81.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src81.csv
[Sun Jan  1 11:59:24 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src81_1.ximg exists
[Sun Jan  1 11:59:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src81.csv
[Sun Jan  1 11:59:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 11:59:28 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sun Jan  1 11:59:28 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sun Jan  1 11:59:28 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Sun Jan  1 23:38:22 2012] Spatial fit model total counts = 2249.470000, observed total counts = 2242.000000
[Sun Jan  1 23:38:22 2012] Offset between fit and detection position for source 102 = 1.483735 pixels
[Sun Jan  1 23:38:22 2012] Warning, changing simple spatial fit ID from 81 to 49
[Sun Jan  1 23:38:22 2012] 2166.798000 total counts/ 1237.420000 bgd. counts: snr = 26.420061
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 1.483735 pixels
  Position = (380.1, 327.6) = 14 41 7.45 -62 12 34.1
  Extent = 20.3" x 20.3", rotation angle = 26
  Source counts = 929.4 +/- 46.5
  Background counts = 1237.4
  Rate = 0.01 +/- 0.0006
[Sun Jan  1 23:38:22 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:38:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:38:22 2012] Assessing source extent using major
[Sun Jan  1 23:38:22 2012] Source does appear to be extended
[Sun Jan  1 23:38:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:38:22 2012] Source is confused with source 108
[Mon Jan  2 15:34:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 15:34:19 2012] Initial guess for spatial extent in simple fitting = 20.34"
[Mon Jan  2 15:34:19 2012] source mask rpix=4.7, npix_max = 107, mask sum = 110, frac = 1.027
[Mon Jan  2 15:34:19 2012] Giving source the simple spatial ID 76 for pass 1, mean size = 20.34"
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src76.ximg exists
[Tue Jan  3 05:59:00 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src76_1.ximg exists
[Tue Jan  3 05:59:00 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_src76 appears to have run properly
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Tue Jan  3 05:59:04 2012] fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Tue Jan  3 05:59:04 2012] Fit fullrun_mos1_xmm0504810301_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Tue Jan  3 21:36:08 2012] Spatial fit model total counts = 2244.560000, observed total counts = 2242.000000
[Tue Jan  3 21:36:08 2012] Offset between fit and detection position for source 102 = 0.623959 pixels
[Tue Jan  3 21:36:08 2012] Warning, changing simple spatial fit ID from 76 to 47
[Tue Jan  3 21:36:08 2012] 1984.884000 total counts/ 1284.560000 bgd. counts: snr = 19.539876
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 0.623959 pixels
  Position = (379.5, 327.8) = 14 41 7.81 -62 12 33.1
  Extent = 18.9 (18.9-37.9)", rotation angle = 0
  Source counts = 700.3 +/- 44.6
  Background counts = 1284.6
  Rate = 0.01 +/- 0.0006
[Tue Jan  3 21:36:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan  3 21:36:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan  3 21:36:08 2012] Assessing source extent using major axis lower bound
[Tue Jan  3 21:36:08 2012] Source does appear to be extended
[Tue Jan  3 21:36:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 00:28:37 2012] XMMSAS src. selection expression = ellipse(32969.172000, 28469.180000, 1135.740033, 1135.740033, 0.000000, X, Y)
[Thu Jan  5 00:28:38 2012] Writing source region out to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src102_src.reg
[Thu Jan  5 00:28:38 2012] Extracting stamp from image fullrun_mos1_xmm0504810301_pi300-10000_cl_sm2.00.img.gz, (314, 263) - (445, 393)
[Thu Jan  5 00:28:38 2012] XMMSAS bgd. selection expression = annulus(32969.172000, 28469.180000, 1892.900054, 3785.800109, X, Y) && !ellipse(27929.514000, 26762.842000, 2312.016067, 2312.016067, 0.000000, X, Y) && !ellipse(31678.328000, 26104.266000, 1312.064038, 1312.064038, 0.000000, X, Y) && !ellipse(31809.885400, 26209.721800, 1413.792041, 1413.792041, 0.000000, X, Y) && !ellipse(30745.900000, 26555.160000, 1559.608045, 1559.608045, 0.000000, X, Y) && !ellipse(28970.440000, 26808.542000, 506.057615, 506.057615, 0.000000, X, Y) && !ellipse(29493.952000, 26578.658200, 2344.112067, 2344.112067, 0.000000, X, Y) && !ellipse(32922.186000, 26036.512000, 2179.616063, 2179.616063, 0.000000, X, Y) && !ellipse(33576.546000, 26439.942000, 1575.712045, 882.120025, 318.795000, X, Y) && !ellipse(29244.592224, 27337.768768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32451.731600, 27236.226000, 1456.408042, 1456.408042, 0.000000, X, Y) && !ellipse(30448.954000, 27697.570000, 1344.896039, 490.825614, 43.300400, X, Y) && !ellipse(28380.377533, 27616.241516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30678.241669, 27437.053589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34325.732000, 27123.284000, 1823.184052, 1823.184052, 0.000000, X, Y) && !ellipse(32374.738000, 28707.877200, 2121.680061, 2121.680061, 0.000000, X, Y) && !ellipse(31358.642000, 32710.222000, 2659.888077, 1446.896042, 35.846000, X, Y) && !ellipse(29300.230000, 29521.382000, 2738.064079, 853.992025, 218.765000, X, Y) && !ellipse(32136.228000, 28769.506000, 3253.760094, 3253.760094, 0.000000, X, Y) && !ellipse(29614.932000, 28632.136000, 1286.528037, 1286.528037, 0.000000, X, Y) && !ellipse(32859.531433, 32742.083557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31132.429400, 28753.016400, 575.575217, 575.575217, 0.000000, X, Y) && !ellipse(32009.922058, 29166.728180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29020.462616, 28224.360046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31924.158600, 30015.034000, 1489.064043, 1489.064043, 0.000000, X, Y) && !ellipse(30617.552000, 33236.334000, 1329.944038, 1329.944038, 0.000000, X, Y) && !ellipse(32304.104000, 31497.710000, 1349.712039, 1349.712039, 0.000000, X, Y) && !ellipse(29017.474000, 29788.057600, 1369.032039, 1369.032039, 0.000000, X, Y)
[Thu Jan  5 00:28:38 2012] Writing fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src102.gif
[Thu Jan  5 04:12:01 2012] Mean detx,y = (-4279.51, 5401.05) 
[Thu Jan  5 04:12:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 04:12:20 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 04:12:21 2012] Setting source spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Thu Jan  5 04:12:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Fri Jan  6 08:07:04 2012] Updating aperture counts using extracted products
[Fri Jan  6 08:07:04 2012] Error reading totcts from fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Fri Jan  6 08:07:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 08:07:10 2012] Using photon index=1.80, rate=0.00972, arf fullrun_mos1_xmm0504810301_pi300-10000_pass1_cl_src102.arf
[Fri Jan  6 08:07:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 08:07:10 2012] Updating source flux to 1.1e-13
[Fri Jan  6 08:07:34 2012] Flag c found in src. 102 procflags, skipping spectral fitting