[Thu Nov 24 05:19:11 2011] Detection parameters:
  Position = (299.8, 233.1) = 14 45 41.29 -62 34 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 682.2 +/- 42.0
  Background counts = 337.9
  Rate = 0.02 +/- 0.001

[Thu Nov 24 05:19:14 2011] Off-axis axis estimate = 4.74'
[Thu Nov 24 05:26:52 2011] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:26:52 2011] Initial guess for spatial extent in simple fitting = 8.80"
[Thu Nov 24 05:26:52 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.786
[Thu Nov 24 05:26:52 2011] Giving source the simple spatial ID 79 for pass 0, mean size = 8.80"
[Thu Nov 24 10:53:30 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src79.ximg exists
[Thu Nov 24 10:53:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src79.csv
[Thu Nov 24 10:53:30 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src79_1.ximg exists
[Thu Nov 24 10:53:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src79.csv
[Thu Nov 24 10:53:30 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 10:53:32 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Thu Nov 24 10:53:32 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Thu Nov 24 10:53:32 2011] Fit fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Fri Nov 25 01:01:21 2011] Warning, spatial fit 79 centroid is now closest to src. 42
[Fri Nov 25 01:01:21 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:21 2011] Assessing source extent using major
[Fri Nov 25 01:01:21 2011] Source does appear to be extended
[Fri Nov 25 01:01:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:21 2011] Source is confused with source 42
[Fri Nov 25 01:03:15 2011] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 01:03:15 2011] Initial guess for spatial extent in simple fitting = 8.80"
[Fri Nov 25 01:03:15 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.786
[Fri Nov 25 01:03:15 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 8.80"
[Fri Nov 25 15:11:43 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src77.ximg exists
[Fri Nov 25 15:11:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src77.csv
[Fri Nov 25 15:11:43 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src77_1.ximg exists
[Fri Nov 25 15:11:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src77.csv
[Fri Nov 25 15:11:43 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 15:11:46 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Fri Nov 25 15:11:46 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Fri Nov 25 15:11:46 2011] Fit fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sat Nov 26 11:50:23 2011] Spatial fit model total counts = 6056.670000, observed total counts = 6045.000000
[Sat Nov 26 11:50:23 2011] Offset between fit and detection position for source 88 = 5.187581 pixels
[Sat Nov 26 11:50:23 2011] Warning, changing simple spatial fit ID from 77 to 75
[Sat Nov 26 11:50:23 2011] 5820.513000 total counts/ 5488.310000 bgd. counts: snr = 4.484192
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 5.187581 pixels
  Position = (304.0, 236.2) = 14 45 38.68 -62 34 6.4
  Extent = 12.5 (10.9-13.7)", rotation angle = 0
  Source counts = 332.2 +/- 76.3
  Background counts = 5488.3
  Rate = 0.005 +/- 0.001
[Sat Nov 26 11:50:23 2011] Source 88 is offset by 4.042708 and 2.301494 pixels which is larger than
2 X fitted extent = 2.712630 x 7.186529, not incorporating fit results
[Sat Nov 26 11:50:24 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:50:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:50:24 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:50:24 2011] Source does appear to be extended
[Sat Nov 26 11:50:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:52:50 2011] XMMSAS src. selection expression = ellipse(26395.594000, 20501.908000, 747.738022, 747.738022, 0.000000, X, Y)
[Sat Nov 26 11:52:50 2011] Writing source region out to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src88_src.reg
[Sat Nov 26 11:52:50 2011] Extracting stamp from image fullrun_pn_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (261, 193) - (347, 279)
[Sat Nov 26 11:52:50 2011] XMMSAS bgd. selection expression = annulus(26395.594000, 20501.908000, 1246.230036, 2492.460072, X, Y) && !ellipse(26660.746057, 26009.178874, 5469.960157, 2026.005317, 95.599867, X, Y) && !ellipse(26978.609000, 27136.516400, 5469.960157, 2323.814467, 116.286700, X, Y) && !ellipse(25888.401800, 23178.500000, 3581.352103, 3581.352103, 0.000000, X, Y) && !ellipse(25955.741058, 22661.725861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27781.505000, 21067.922000, 5462.592157, 5462.592157, 0.000000, X, Y) && !ellipse(28101.595000, 19864.940000, 2025.488058, 2025.488058, 0.000000, X, Y) && !ellipse(29328.572000, 23152.448000, 580.700017, 580.700017, 0.000000, X, Y) && !ellipse(26079.903400, 20832.486000, 894.304026, 894.304026, 0.000000, X, Y) && !ellipse(27110.947120, 17871.114000, 1303.584038, 1303.584038, 0.000000, X, Y) && !ellipse(29648.010000, 23999.888000, 2619.968075, 2619.968075, 0.000000, X, Y) && !ellipse(27985.595600, 22978.130000, 1257.312036, 626.735218, 103.552600, X, Y) && !ellipse(27690.494000, 22169.742000, 1600.880046, 1110.720032, -0.000000, X, Y) && !ellipse(25218.049133, 22029.883316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.170000, 21108.014000, 1324.120038, 1324.120038, 0.000000, X, Y) && !ellipse(25373.900000, 20414.974000, 1116.552032, 169.400005, 90.000000, X, Y) && !ellipse(25251.818000, 20177.412000, 648.328819, 648.328819, 0.000000, X, Y) && !ellipse(26112.938000, 19401.692000, 1497.736043, 1497.736043, 0.000000, X, Y) && !ellipse(25054.906000, 19533.864000, 1416.552041, 1416.552041, 0.000000, X, Y) && !ellipse(26323.451996, 18318.285110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28022.000000, 18256.536000, 1595.264046, 1595.264046, 0.000000, X, Y) && !ellipse(28730.451000, 17280.074000, 1611.400046, 1611.400046, 0.000000, X, Y) && !ellipse(28408.126000, 17983.282000, 1467.096042, 1467.096042, 0.000000, X, Y) && !ellipse(27118.423523, 17364.747269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28737.027618, 23426.969025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.968994, 23359.350739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.302887, 23370.528412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29224.127258, 21007.930679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29424.804993, 20481.022858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.989960, 18550.317413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29250.019104, 18138.142700, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Nov 26 11:52:50 2011] Writing fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src88.gif
[Sat Nov 26 17:30:18 2011] Mean detx,y = (-1400.64, 6824.11) 
[Sat Nov 26 17:30:22 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 17:30:44 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 17:30:45 2011] Setting source spectrum file to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sat Nov 26 17:30:45 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Wed Nov 30 00:29:05 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:05 2011] Error reading totcts from fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Wed Nov 30 00:29:14 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:14 2011] Using photon index=1.80, rate=0.00516, arf fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src88.arf
[Wed Nov 30 00:29:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:14 2011] Updating source flux to 1.8e-14
[Wed Nov 30 00:50:27 2011] Flag b found in src. 88 procflags, skipping spectral fitting
[Wed Nov 30 00:50:27 2011] Flag c found in src. 88 procflags, skipping spectral fitting