[Thu Nov 24 05:19:11 2011] Detection parameters:
  Position = (224.5, 238.9) = 14 46 28.68 -62 33 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.1 +/- 27.4
  Background counts = 178.7
  Rate = 0.004 +/- 0.0004

[Thu Nov 24 05:19:14 2011] Off-axis axis estimate = 6.88'
[Thu Nov 24 05:26:52 2011] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:26:52 2011] Initial guess for spatial extent in simple fitting = 9.87"
[Thu Nov 24 05:26:52 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.978
[Thu Nov 24 05:26:52 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 9.87"
[Thu Nov 24 10:53:30 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src76.ximg exists
[Thu Nov 24 10:53:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src76.csv
[Thu Nov 24 10:53:30 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src76_1.ximg exists
[Thu Nov 24 10:53:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src76.csv
[Thu Nov 24 10:53:30 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 10:53:32 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Thu Nov 24 10:53:32 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Thu Nov 24 10:53:32 2011] Fit fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Fri Nov 25 01:01:21 2011] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 11.728885 pixels away
[Fri Nov 25 01:01:21 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:21 2011] Assessing source extent using major
[Fri Nov 25 01:01:21 2011] Source does appear to be extended
[Fri Nov 25 01:01:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:03:15 2011] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 01:03:15 2011] Initial guess for spatial extent in simple fitting = 9.87"
[Fri Nov 25 01:03:15 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.978
[Fri Nov 25 01:03:15 2011] Giving source the simple spatial ID 74 for pass 1, mean size = 9.87"
[Fri Nov 25 15:11:43 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src74.ximg exists
[Fri Nov 25 15:11:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src74.csv
[Fri Nov 25 15:11:43 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src74_1.ximg exists
[Fri Nov 25 15:11:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src74.csv
[Fri Nov 25 15:11:43 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 15:11:46 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Fri Nov 25 15:11:46 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Fri Nov 25 15:11:46 2011] Fit fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Sat Nov 26 11:50:23 2011] Spatial fit model total counts = 1822.000000, observed total counts = 1822.000000
[Sat Nov 26 11:50:23 2011] Offset between fit and detection position for source 85 = 0.459545 pixels
[Sat Nov 26 11:50:23 2011] 1784.323000 total counts/ 1490.150000 bgd. counts: snr = 7.620576
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.459545 pixels
  Position = (225.0, 239.0) = 14 46 28.40 -62 33 53.8
  Extent = 8.4 (6.8-10.4)", rotation angle = 0
  Source counts = 294.2 +/- 42.2
  Background counts = 1490.2
  Rate = 0.005 +/- 0.0007
[Sat Nov 26 11:50:24 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:50:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:50:24 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:50:24 2011] Source does appear to be extended
[Sat Nov 26 11:50:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:52:50 2011] XMMSAS src. selection expression = ellipse(19522.519000, 20744.205400, 503.291414, 503.291414, 0.000000, X, Y)
[Sat Nov 26 11:52:50 2011] Writing source region out to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src85_src.reg
[Sat Nov 26 11:52:50 2011] Extracting stamp from image fullrun_pn_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (196, 210) - (254, 268)
[Sat Nov 26 11:52:50 2011] XMMSAS bgd. selection expression = annulus(19522.519000, 20744.205400, 838.819024, 1677.638048, X, Y) && !ellipse(26660.746057, 26009.178874, 5469.960157, 2026.005317, 95.599867, X, Y)
[Sat Nov 26 11:52:50 2011] Writing fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src85.gif
[Sat Nov 26 17:26:38 2011] Mean detx,y = (-8174.23, 5628.63) 
[Sat Nov 26 17:26:44 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 17:27:21 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 17:27:22 2011] Setting source spectrum file to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Sat Nov 26 17:27:22 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Wed Nov 30 00:29:04 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:04 2011] Error reading totcts from fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Wed Nov 30 00:29:14 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:14 2011] Using photon index=1.80, rate=0.00457, arf fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src85.arf
[Wed Nov 30 00:29:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:14 2011] Updating source flux to 2.4e-14