[Thu Nov 24 05:19:10 2011] Detection parameters:
  Position = (352.3, 465.1) = 14 45 8.57 -62 17 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1127.0 +/- 52.1
  Background counts = 301.0
  Rate = 0.02 +/- 0.0007

[Thu Nov 24 05:19:14 2011] Off-axis axis estimate = 12.69'
[Thu Nov 24 05:26:52 2011] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:26:52 2011] Initial guess for spatial extent in simple fitting = 12.78"
[Thu Nov 24 05:26:52 2011] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.889
[Thu Nov 24 05:26:52 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 12.78"
[Thu Nov 24 10:53:29 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src14.ximg exists
[Thu Nov 24 10:53:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src14.csv
[Thu Nov 24 10:53:29 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Nov 24 10:53:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src14.csv
[Thu Nov 24 10:53:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 10:53:31 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Nov 24 10:53:31 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Nov 24 10:53:31 2011] Fit fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Nov 25 01:01:20 2011] Warning, spatial fit 14 centroid is now closest to src. 16
[Fri Nov 25 01:01:21 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:21 2011] Assessing source extent using major
[Fri Nov 25 01:01:21 2011] Source does appear to be extended
[Fri Nov 25 01:01:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:21 2011] Source is confused with source 12
[Fri Nov 25 01:03:15 2011] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 01:03:15 2011] Initial guess for spatial extent in simple fitting = 12.78"
[Fri Nov 25 01:03:15 2011] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.889
[Fri Nov 25 01:03:15 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 12.78"
[Fri Nov 25 15:11:40 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src14.ximg exists
[Fri Nov 25 15:11:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src14.csv
[Fri Nov 25 15:11:40 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Nov 25 15:11:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src14.csv
[Fri Nov 25 15:11:40 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 15:11:44 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Nov 25 15:11:44 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Nov 25 15:11:44 2011] Fit fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sat Nov 26 11:50:23 2011] Warning, spatial fit 14 centroid is now closest to src. 35
[Sat Nov 26 11:50:23 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.552239 pixels away
[Sat Nov 26 11:50:24 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:50:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:50:24 2011] Assessing source extent using major
[Sat Nov 26 11:50:24 2011] Source does appear to be extended
[Sat Nov 26 11:50:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:52:37 2011] Counts = 1127.041504, rescaling region sizes by 2.000000
[Sat Nov 26 11:52:37 2011] XMMSAS src. selection expression = ellipse(30599.259857, 40411.071960, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Nov 26 11:52:37 2011] Writing source region out to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src14_src.reg
[Sat Nov 26 11:52:37 2011] Extracting stamp from image fullrun_pn_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (277, 390) - (427, 540)
[Sat Nov 26 11:52:37 2011] XMMSAS bgd. selection expression = annulus(30599.259857, 40411.071960, 4350.000000, 8700.000000, X, Y) && !ellipse(26978.609000, 27136.516400, 5469.960157, 2323.814467, 116.286700, X, Y) && !ellipse(27775.400600, 29304.677000, 3866.688111, 3866.688111, 0.000000, X, Y) && !ellipse(28396.975800, 31165.614200, 4273.200123, 4273.200123, 0.000000, X, Y) && !ellipse(30190.793400, 32106.316000, 1060.976031, 1060.976031, 0.000000, X, Y) && !ellipse(31701.626000, 41409.894000, 2182.696063, 2182.696063, 0.000000, X, Y) && !ellipse(31834.686000, 41077.976000, 11878.608342, 11878.608342, 0.000000, X, Y) && !ellipse(29482.008840, 39247.823980, 988.144028, 988.144028, 0.000000, X, Y) && !ellipse(31288.646000, 39767.362000, 1979.768057, 1979.768057, 0.000000, X, Y) && !ellipse(30219.407200, 38212.398000, 1549.512045, 1549.512045, 0.000000, X, Y) && !ellipse(30168.186000, 37900.286000, 1846.888053, 1846.888053, 0.000000, X, Y) && !ellipse(29534.289180, 37051.344400, 1801.856052, 886.112025, 108.234000, X, Y) && !ellipse(29398.778200, 35075.096000, 1650.272047, 1650.272047, 0.000000, X, Y) && !ellipse(28733.221913, 33113.568221, 1307.760038, 407.948920, 90.000000, X, Y) && !ellipse(29606.354000, 33363.765200, 721.217621, 721.217621, 0.000000, X, Y) && !ellipse(28648.909620, 32288.386000, 4524.888130, 4524.888130, 0.000000, X, Y) && !ellipse(30107.724800, 31702.586000, 1491.360043, 1491.360043, 0.000000, X, Y) && !ellipse(32211.204000, 41946.462400, 1955.488056, 1955.488056, 0.000000, X, Y) && !ellipse(31117.136000, 39229.434000, 995.336029, 995.336029, 0.000000, X, Y) && !ellipse(30423.794281, 38492.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33320.471069, 42008.956207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26510.145691, 38289.076965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22986.393463, 37835.605927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38811.037127, 37653.852289, 1624.157747, 1450.873534, 8.273988, X, Y) && !ellipse(28479.311890, 36047.751678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25086.040500, 35955.252600, 448.761613, 448.761613, 0.000000, X, Y) && !ellipse(28377.985352, 34743.665009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37838.156000, 33621.253400, 383.897611, 383.897611, 0.000000, X, Y) && !ellipse(27690.722400, 33630.869800, 662.316819, 662.316819, 0.000000, X, Y) && !ellipse(27566.284000, 33079.606000, 1778.720051, 1093.440031, 101.946000, X, Y) && !ellipse(27176.778700, 31942.564200, 845.664024, 845.664024, 0.000000, X, Y) && !ellipse(32721.844269, 43529.579102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24982.438200, 37436.890000, 616.038418, 616.038418, 0.000000, X, Y) && !ellipse(28339.089172, 36666.931061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30771.624359, 36144.381470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36483.856171, 35183.619293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35922.009491, 34745.897888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.132200, 33000.105200, 560.594416, 386.008011, 341.290126, X, Y)
[Sat Nov 26 11:52:37 2011] Writing fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src14.gif
[Sat Nov 26 13:33:54 2011] Mean detx,y = (5882.21, -12031.37) 
[Sat Nov 26 13:33:59 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 13:35:11 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 13:35:12 2011] Setting source spectrum file to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Nov 26 13:35:12 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Nov 28 00:22:23 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 00:22:23 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:00 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:00 2011] Error reading totcts from fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Nov 30 00:29:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:11 2011] Using photon index=1.80, rate=0.0158, arf fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src14.arf
[Wed Nov 30 00:29:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:11 2011] Updating source flux to 8.7e-14
[Wed Nov 30 00:50:27 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting