[Thu Nov 24 05:19:10 2011] Detection parameters:
  Position = (303.0, 284.0) = 14 45 39.30 -62 30 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4738.3 +/- 97.8
  Background counts = 409.1
  Rate = 0.09 +/- 0.002

[Thu Nov 24 05:19:14 2011] Off-axis axis estimate = 1.09'
[Thu Nov 24 05:26:52 2011] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:26:52 2011] Initial guess for spatial extent in simple fitting = 6.98"
[Thu Nov 24 05:26:52 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Thu Nov 24 05:26:52 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 6.98"
[Thu Nov 24 10:53:29 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src11.ximg exists
[Thu Nov 24 10:53:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src11.csv
[Thu Nov 24 10:53:29 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Nov 24 10:53:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src11.csv
[Thu Nov 24 10:53:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 10:53:31 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Nov 24 10:53:31 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Nov 24 10:53:31 2011] Fit fullrun_pn_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Nov 25 01:01:20 2011] Spatial fit model total counts = 25311.600000, observed total counts = 25296.000000
[Fri Nov 25 01:01:20 2011] Offset between fit and detection position for source 11 = 0.109217 pixels
[Fri Nov 25 01:01:20 2011] Warning, changing simple spatial fit ID from 11 to 4
[Fri Nov 25 01:01:20 2011] 25905.980000 total counts/ 18853.000000 bgd. counts: snr = 51.366789
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.109217 pixels
  Position = (302.9, 284.1) = 14 45 39.35 -62 30 38.0
  Extent = 13.7 (13.7-27.5)", rotation angle = 0
  Source counts = 7053.0 +/- 161.0
  Background counts = 18853.0
  Rate = 0.1 +/- 0.003
[Fri Nov 25 01:01:21 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:01:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:01:21 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:01:21 2011] Source does appear to be extended
[Fri Nov 25 01:01:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:01:21 2011] Source is confused with source 4
[Fri Nov 25 01:03:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 01:03:15 2011] Initial guess for spatial extent in simple fitting = 13.74"
[Fri Nov 25 01:03:15 2011] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.195
[Fri Nov 25 01:03:15 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 13.74"
[Fri Nov 25 15:11:40 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src11.ximg exists
[Fri Nov 25 15:11:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src11.csv
[Fri Nov 25 15:11:40 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Nov 25 15:11:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src11.csv
[Fri Nov 25 15:11:40 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 15:11:44 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Nov 25 15:11:44 2011] fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Nov 25 15:11:44 2011] Fit fullrun_pn_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Nov 26 11:50:23 2011] Warning, spatial fit 11 centroid is now closest to src. 69
[Sat Nov 26 11:50:24 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:50:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:50:24 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:50:24 2011] Source does appear to be extended
[Sat Nov 26 11:50:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:52:36 2011] Counts = 7052.980000, rescaling region sizes by 2.000000
[Sat Nov 26 11:52:36 2011] XMMSAS src. selection expression = ellipse(26302.973600, 24669.842000, 1649.268047, 1649.268047, 0.000000, X, Y)
[Sat Nov 26 11:52:36 2011] Writing source region out to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src11_src.reg
[Sat Nov 26 11:52:36 2011] Extracting stamp from image fullrun_pn_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (208, 189) - (398, 379)
[Sat Nov 26 11:52:36 2011] XMMSAS bgd. selection expression = annulus(26302.973600, 24669.842000, 5497.560158, 10995.120316, X, Y) && !ellipse(26660.746057, 26009.178874, 5469.960157, 2026.005317, 95.599867, X, Y) && !ellipse(26978.609000, 27136.516400, 5469.960157, 2323.814467, 116.286700, X, Y) && !ellipse(27775.400600, 29304.677000, 3866.688111, 3866.688111, 0.000000, X, Y) && !ellipse(26730.692000, 25536.552000, 429.459212, 429.459212, 0.000000, X, Y) && !ellipse(25888.401800, 23178.500000, 3581.352103, 3581.352103, 0.000000, X, Y) && !ellipse(25955.741058, 22661.725861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28396.975800, 31165.614200, 4273.200123, 4273.200123, 0.000000, X, Y) && !ellipse(30190.793400, 32106.316000, 1060.976031, 1060.976031, 0.000000, X, Y) && !ellipse(26657.332550, 27787.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28762.448840, 25388.402600, 616.963218, 616.963218, 0.000000, X, Y) && !ellipse(31834.686000, 41077.976000, 11878.608342, 11878.608342, 0.000000, X, Y) && !ellipse(29534.289180, 37051.344400, 1801.856052, 886.112025, 108.234000, X, Y) && !ellipse(29398.778200, 35075.096000, 1650.272047, 1650.272047, 0.000000, X, Y) && !ellipse(28733.221913, 33113.568221, 1307.760038, 407.948920, 90.000000, X, Y) && !ellipse(29606.354000, 33363.765200, 721.217621, 721.217621, 0.000000, X, Y) && !ellipse(28648.909620, 32288.386000, 4524.888130, 4524.888130, 0.000000, X, Y) && !ellipse(30107.724800, 31702.586000, 1491.360043, 1491.360043, 0.000000, X, Y) && !ellipse(26521.177973, 29835.955036, 1307.760038, 676.497068, 105.998347, X, Y) && !ellipse(30418.312400, 29768.657200, 1427.584041, 1427.584041, 0.000000, X, Y) && !ellipse(26370.507408, 29182.184388, 1238.368036, 777.821520, 111.619284, X, Y) && !ellipse(25992.104000, 28146.294000, 1162.792033, 1162.792033, 0.000000, X, Y) && !ellipse(27970.188600, 25131.398800, 1170.384034, 1170.384034, 0.000000, X, Y) && !ellipse(27781.505000, 21067.922000, 5462.592157, 5462.592157, 0.000000, X, Y) && !ellipse(28101.595000, 19864.940000, 2025.488058, 2025.488058, 0.000000, X, Y) && !ellipse(30721.280600, 27816.658800, 901.256026, 901.256026, 0.000000, X, Y) && !ellipse(25177.545260, 25932.249200, 633.172818, 633.172818, 0.000000, X, Y) && !ellipse(25041.346313, 23903.347656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29328.572000, 23152.448000, 580.700017, 580.700017, 0.000000, X, Y) && !ellipse(26079.903400, 20832.486000, 894.304026, 894.304026, 0.000000, X, Y) && !ellipse(27110.947120, 17871.114000, 1303.584038, 1303.584038, 0.000000, X, Y) && !ellipse(29527.379395, 14664.466980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.311890, 36047.751678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25086.040500, 35955.252600, 448.761613, 448.761613, 0.000000, X, Y) && !ellipse(28377.985352, 34743.665009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27690.722400, 33630.869800, 662.316819, 662.316819, 0.000000, X, Y) && !ellipse(27566.284000, 33079.606000, 1778.720051, 1093.440031, 101.946000, X, Y) && !ellipse(27176.778700, 31942.564200, 845.664024, 845.664024, 0.000000, X, Y) && !ellipse(31460.599152, 29758.279327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30391.371063, 28782.972900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31912.178000, 29053.332000, 541.373616, 541.373616, 0.000000, X, Y) && !ellipse(25459.213409, 26914.246460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30966.244000, 27335.292000, 1390.656040, 1390.656040, 0.000000, X, Y) && !ellipse(22763.684296, 26598.908630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29175.440000, 14878.282000, 1816.240052, 1816.240052, 0.000000, X, Y) && !ellipse(34889.455322, 26135.921967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31756.709259, 26256.263824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35287.135200, 25389.120400, 1644.080047, 693.178420, 77.839098, X, Y) && !ellipse(25106.413116, 25447.414459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27184.740845, 24928.239410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29437.357971, 24660.365540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35568.122000, 24019.317600, 934.728027, 934.728027, 0.000000, X, Y) && !ellipse(29648.010000, 23999.888000, 2619.968075, 2619.968075, 0.000000, X, Y) && !ellipse(35350.615326, 23778.080719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.595600, 22978.130000, 1257.312036, 626.735218, 103.552600, X, Y) && !ellipse(16042.063446, 23299.185120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35699.938000, 23103.962000, 884.136025, 884.136025, 0.000000, X, Y) && !ellipse(32609.679901, 23510.501556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22904.885740, 22871.235200, 430.029612, 430.029612, 0.000000, X, Y) && !ellipse(27690.494000, 22169.742000, 1600.880046, 1110.720032, -0.000000, X, Y) && !ellipse(25218.049133, 22029.883316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35498.935883, 22241.132050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.170000, 21108.014000, 1324.120038, 1324.120038, 0.000000, X, Y) && !ellipse(25373.900000, 20414.974000, 1116.552032, 169.400005, 90.000000, X, Y) && !ellipse(19522.519000, 20744.205400, 671.055219, 671.055219, 0.000000, X, Y) && !ellipse(25251.818000, 20177.412000, 648.328819, 648.328819, 0.000000, X, Y) && !ellipse(34129.142548, 19533.355286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.594000, 20501.908000, 996.984029, 996.984029, 0.000000, X, Y) && !ellipse(26112.938000, 19401.692000, 1497.736043, 1497.736043, 0.000000, X, Y) && !ellipse(25054.906000, 19533.864000, 1416.552041, 1416.552041, 0.000000, X, Y) && !ellipse(26323.451996, 18318.285110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28022.000000, 18256.536000, 1595.264046, 1595.264046, 0.000000, X, Y) && !ellipse(28730.451000, 17280.074000, 1611.400046, 1611.400046, 0.000000, X, Y) && !ellipse(36374.766200, 17932.566000, 1054.944030, 1054.944030, 0.000000, X, Y) && !ellipse(28408.126000, 17983.282000, 1467.096042, 1467.096042, 0.000000, X, Y) && !ellipse(28371.257200, 16909.686000, 601.024017, 601.024017, 0.000000, X, Y) && !ellipse(27118.423523, 17364.747269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33934.146400, 16952.540000, 1818.608052, 1818.608052, 0.000000, X, Y) && !ellipse(36563.318542, 15726.132217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28697.626000, 16402.476000, 796.129623, 796.129623, 0.000000, X, Y) && !ellipse(28958.088013, 14586.219284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30771.624359, 36144.381470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36483.856171, 35183.619293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35922.009491, 34745.897888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.132200, 33000.105200, 560.594416, 386.008011, 341.290126, X, Y) && !ellipse(35404.355774, 29281.813080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32705.114929, 28741.944733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18072.667023, 28341.484009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34639.253326, 28236.334229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34803.535919, 27083.369171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33673.199677, 27005.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34914.943604, 26578.308258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35960.849915, 15008.696838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16961.955429, 26717.025574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30989.687225, 26330.655090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24592.848145, 26028.597717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35143.507111, 24752.136627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34794.997345, 24494.439484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34862.036835, 24119.119232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.386000, 24439.614000, 1135.768033, 1135.768033, 0.000000, X, Y) && !ellipse(20826.402344, 23822.770172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28737.027618, 23426.969025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.968994, 23359.350739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34773.433197, 15182.476471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.302887, 23370.528412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35685.684000, 22709.210000, 727.176021, 727.176021, 0.000000, X, Y) && !ellipse(35053.297180, 22392.726257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33672.395203, 21595.266968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35936.986511, 21443.255920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33119.076477, 21360.249084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29224.127258, 21007.930679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34873.442841, 21527.908875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34020.570435, 20753.180618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29424.804993, 20481.022858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33045.481720, 20239.058090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34424.623413, 19946.970352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33622.703674, 19798.696259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34282.712097, 18830.251755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35111.009552, 18832.784653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36320.651520, 18399.515732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.989960, 18550.317413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34131.821472, 18221.249100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29250.019104, 18138.142700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34161.610901, 17868.924057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35264.024200, 17869.621002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36571.646000, 17176.770000, 1139.624033, 1139.624033, 0.000000, X, Y) && !ellipse(25775.037109, 16744.994400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27381.406830, 16486.248520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26724.438416, 16479.893707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34480.073700, 16405.984329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34569.237549, 15873.214203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.133270, 15896.502792, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Nov 26 11:52:36 2011] Writing fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src11.gif
[Sat Nov 26 13:09:21 2011] Mean detx,y = (-788.94, 2664.86) 
[Sat Nov 26 13:09:28 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 13:14:22 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 13:14:22 2011] Setting source spectrum file to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Nov 26 13:14:22 2011] Setting bgd. spectrum file to fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Nov 30 00:29:00 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:00 2011] Error reading totcts from fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Nov 30 00:29:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:11 2011] Using photon index=1.80, rate=0.11, arf fullrun_pn_xmm0504810201_pi300-10000_pass1_cl_src11.arf
[Wed Nov 30 00:29:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:11 2011] Updating source flux to 2.8e-13
[Wed Nov 30 00:50:27 2011] Flag c found in src. 11 procflags, skipping spectral fitting