[Thu Nov 24 05:21:07 2011] Detection parameters:
  Position = (339.4, 284.9) = 14 45 16.44 -62 30 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 269.1 +/- 29.9
  Background counts = 198.3
  Rate = 0.004 +/- 0.0004

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 3.12'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 7.99"
[Thu Nov 24 16:42:30 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 73 for pass 0, mean size = 7.99"
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src73.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src73.csv
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src73_1.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src73.csv
[Fri Nov 25 01:00:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Fri Nov 25 01:00:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src73.csv
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Fri Nov 25 01:00:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src73.csv
[Fri Nov 25 01:00:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:02:13 2011] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 97 at 10.576912 pixels away
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 105
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 7.99"
[Fri Nov 25 23:57:19 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 74 for pass 1, mean size = 7.99"
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src74.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src74.csv
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src74_1.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src74.csv
[Sat Nov 26 11:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Sat Nov 26 11:49:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Sat Nov 26 11:51:34 2011] Spatial fit model total counts = 3621.150000, observed total counts = 3628.000000
[Sat Nov 26 11:51:34 2011] Offset between fit and detection position for source 97 = 6.337623 pixels
[Sat Nov 26 11:51:34 2011] 3644.741000 total counts/ 2677.960000 bgd. counts: snr = 18.682116
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 6.337623 pixels
  Position = (342.7, 279.5) = 14 45 14.37 -62 30 57.9
  Extent = 16.0 (15.9-32.0)", rotation angle = 0
  Source counts = 966.8 +/- 60.4
  Background counts = 2678.0
  Rate = 0.01 +/- 0.0008
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:23 2011] XMMSAS src. selection expression = ellipse(29762.242000, 24268.984000, 958.908028, 958.908028, 0.000000, X, Y)
[Tue Nov 29 04:43:24 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src97_src.reg
[Tue Nov 29 04:43:24 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (288, 224) - (398, 335)
[Tue Nov 29 04:43:24 2011] XMMSAS bgd. selection expression = annulus(29762.242000, 24268.984000, 1598.180046, 3196.360092, X, Y) && !ellipse(26668.119540, 25833.732200, 1078.000031, 1078.000031, 0.000000, X, Y) && !ellipse(26964.620000, 27064.718000, 723.760821, 723.760821, 0.000000, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(26613.252000, 25264.346000, 976.216028, 976.216028, 0.000000, X, Y) && !ellipse(26424.450000, 24509.666000, 585.609617, 585.609617, 0.000000, X, Y) && !ellipse(25838.926400, 22815.724000, 1551.240045, 1551.240045, 0.000000, X, Y) && !ellipse(28763.042960, 25369.424400, 576.191217, 576.191217, 0.000000, X, Y) && !ellipse(25878.018384, 23165.672000, 1266.568036, 1266.568036, 0.000000, X, Y) && !ellipse(28214.960400, 20640.399000, 677.336019, 677.336019, 0.000000, X, Y) && !ellipse(27642.098000, 21478.286000, 999.408029, 999.408029, 0.000000, X, Y) && !ellipse(28338.770000, 19799.480000, 1515.544044, 1515.544044, 0.000000, X, Y) && !ellipse(26438.932495, 27347.868500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30874.410000, 27682.044000, 1375.608040, 1375.608040, 0.000000, X, Y) && !ellipse(27450.823600, 20489.535320, 1117.864032, 1117.864032, 0.000000, X, Y) && !ellipse(26487.381470, 27709.666687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26282.433600, 28675.260000, 1244.368036, 1244.368036, 0.000000, X, Y) && !ellipse(27928.621643, 25118.926270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.598541, 24902.628998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28074.764800, 20182.610000, 2512.384072, 2512.384072, 0.000000, X, Y) && !ellipse(29178.244060, 22887.227600, 796.143223, 796.143223, 0.000000, X, Y) && !ellipse(27663.564000, 22092.876000, 1309.008038, 314.276009, 85.672660, X, Y) && !ellipse(27658.144000, 21856.566000, 1227.280035, 1227.280035, 0.000000, X, Y) && !ellipse(30224.778000, 28356.614000, 2731.992079, 2731.992079, 0.000000, X, Y) && !ellipse(28120.497955, 21591.195480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29611.905800, 23851.468400, 1038.824030, 1038.824030, 0.000000, X, Y) && !ellipse(32291.219119, 28734.899135, 1984.928057, 1745.993159, 43.668361, X, Y) && !ellipse(30104.582000, 28695.310000, 1394.776040, 1394.776040, 0.000000, X, Y) && !ellipse(30361.816000, 29429.788000, 2166.640062, 2166.640062, 0.000000, X, Y) && !ellipse(30981.388000, 27323.784000, 1392.904040, 1392.904040, 0.000000, X, Y) && !ellipse(27249.358948, 22242.265747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26984.665802, 24527.014038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.834000, 20194.031000, 1404.248040, 1404.248040, 0.000000, X, Y) && !ellipse(27772.829834, 22894.582550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.286865, 24178.660919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27237.549377, 23364.838684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29235.334000, 22481.044000, 1345.368039, 1345.368039, 0.000000, X, Y) && !ellipse(25605.447400, 19969.652000, 1333.416038, 1333.416038, 0.000000, X, Y) && !ellipse(28340.156494, 22478.072174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33124.537872, 21344.841949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.855743, 23423.873260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30540.640000, 28088.712000, 2375.896068, 2375.896068, 0.000000, X, Y) && !ellipse(31940.336395, 26747.194672, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:24 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src97.gif
[Tue Nov 29 08:45:07 2011] Mean detx,y = (-2314.34, -3789.41) 
[Tue Nov 29 08:45:11 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:45:40 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:45:40 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Tue Nov 29 08:45:40 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Wed Nov 30 00:29:32 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:32 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Wed Nov 30 00:29:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:39 2011] Using photon index=1.80, rate=0.0129, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src97.arf
[Wed Nov 30 00:29:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:39 2011] Updating source flux to 1.3e-13
[Wed Nov 30 00:40:04 2011] Flag c found in src. 97 procflags, skipping spectral fitting