[Thu Nov 24 05:21:07 2011] Detection parameters:
  Position = (289.1, 294.0) = 14 45 48.01 -62 29 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 467.1 +/- 33.4
  Background counts = 128.0
  Rate = 0.007 +/- 0.0005

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 0.75'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 6.80"
[Thu Nov 24 16:42:30 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.939
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 6.80"
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src48.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src48.csv
[Fri Nov 25 01:00:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri Nov 25 01:00:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src48.csv
[Fri Nov 25 01:00:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Fri Nov 25 01:02:13 2011] Spatial fit model total counts = 2914.030000, observed total counts = 2908.000000
[Fri Nov 25 01:02:13 2011] Offset between fit and detection position for source 92 = 3.038669 pixels
[Fri Nov 25 01:02:13 2011] 3034.512000 total counts/ 2760.500000 bgd. counts: snr = 5.215257
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 3.038669 pixels
  Position = (288.5, 291.0) = 14 45 48.37 -62 30 8.0
  Extent = 8.9 (6.4-12.7)", rotation angle = 0
  Source counts = 274.0 +/- 55.1
  Background counts = 2760.5
  Rate = 0.004 +/- 0.0007
[Fri Nov 25 01:02:13 2011] Spatial fit model total counts = 2363.250000, observed total counts = 2357.000000
[Fri Nov 25 01:02:13 2011] Offset between fit and detection position for source 92 = 1.572144 pixels
[Fri Nov 25 01:02:13 2011] Warning, changing simple spatial fit ID from 48 to 69
[Fri Nov 25 01:02:13 2011] 2479.682000 total counts/ 2329.010000 bgd. counts: snr = 3.122100
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 1.572144 pixels
  Position = (288.1, 289.5) = 14 45 48.62 -62 30 14.6
  Extent = 6.2 (4.8-8.9)", rotation angle = 0
  Source counts = 150.7 +/- 49.8
  Background counts = 2329.0
  Rate = 0.002 +/- 0.0007
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 98
[Fri Nov 25 23:57:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 6.20"
[Fri Nov 25 23:57:19 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.809
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 6.20"
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src49.ximg exists
[Sat Nov 26 11:49:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src49.csv
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src49_1.ximg exists
[Sat Nov 26 11:49:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src49.csv
[Sat Nov 26 11:49:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sat Nov 26 11:49:36 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sat Nov 26 11:49:36 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Sat Nov 26 11:51:34 2011] Spatial fit model total counts = 2652.240000, observed total counts = 2651.000000
[Sat Nov 26 11:51:34 2011] Offset between fit and detection position for source 92 = 0.758820 pixels
[Sat Nov 26 11:51:34 2011] 2616.877000 total counts/ 2349.810000 bgd. counts: snr = 5.509394
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 0.758820 pixels
  Position = (288.5, 290.2) = 14 45 48.42 -62 30 11.6
  Extent = 8.5 (6.3-11.3)", rotation angle = 0
  Source counts = 267.1 +/- 51.2
  Background counts = 2349.8
  Rate = 0.004 +/- 0.0007
[Sat Nov 26 11:51:34 2011] Spatial fit model total counts = 2364.470000, observed total counts = 2357.000000
[Sat Nov 26 11:51:34 2011] Offset between fit and detection position for source 92 = 0.745751 pixels
[Sat Nov 26 11:51:34 2011] Warning, changing simple spatial fit ID from 49 to 70
[Sat Nov 26 11:51:34 2011] 2473.327000 total counts/ 2321.290000 bgd. counts: snr = 3.155619
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 0.745751 pixels
  Position = (288.1, 289.5) = 14 45 48.63 -62 30 14.5
  Extent = 6.3 (5.1-8.3)", rotation angle = 0
  Source counts = 152.0 +/- 49.7
  Background counts = 2321.3
  Rate = 0.002 +/- 0.0007
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:18 2011] XMMSAS src. selection expression = ellipse(25017.459800, 25138.974000, 375.468611, 375.468611, 0.000000, X, Y)
[Tue Nov 29 04:43:18 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src92_src.reg
[Tue Nov 29 04:43:18 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (267, 268) - (310, 311)
[Tue Nov 29 04:43:18 2011] XMMSAS bgd. selection expression = annulus(25017.459800, 25138.974000, 625.781018, 1251.562036, X, Y) && !ellipse(26668.119540, 25833.732200, 1078.000031, 1078.000031, 0.000000, X, Y) && !ellipse(26964.620000, 27064.718000, 723.760821, 723.760821, 0.000000, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(26613.252000, 25264.346000, 976.216028, 976.216028, 0.000000, X, Y) && !ellipse(26424.450000, 24509.666000, 585.609617, 585.609617, 0.000000, X, Y) && !ellipse(25838.926400, 22815.724000, 1551.240045, 1551.240045, 0.000000, X, Y) && !ellipse(25878.018384, 23165.672000, 1266.568036, 1266.568036, 0.000000, X, Y) && !ellipse(25509.908539, 27004.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24993.300903, 24572.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26984.665802, 24527.014038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.286865, 24178.660919, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:18 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src92.gif
[Tue Nov 29 07:31:41 2011] Mean detx,y = (2164.07, -2272.97) 
[Tue Nov 29 07:31:44 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 07:31:59 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 07:31:59 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Tue Nov 29 07:31:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Wed Nov 30 00:29:30 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:30 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Wed Nov 30 00:29:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:38 2011] Using photon index=1.80, rate=0.00203, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src92.arf
[Wed Nov 30 00:29:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:38 2011] Updating source flux to 2.3e-14
[Wed Nov 30 00:40:04 2011] Flag c found in src. 92 procflags, skipping spectral fitting