[Thu Nov 24 05:21:06 2011] Detection parameters:
  Position = (263.4, 311.0) = 14 46 4.14 -62 28 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 335.6 +/- 25.2
  Background counts = 65.6
  Rate = 0.005 +/- 0.0004

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 2.70'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 7.78"
[Thu Nov 24 16:42:30 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.955
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 60 for pass 0, mean size = 7.78"
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src60.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src60.csv
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src60_1.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src60.csv
[Fri Nov 25 01:00:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Fri Nov 25 01:02:13 2011] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 83 at 10.572463 pixels away
[Fri Nov 25 01:02:13 2011] Source 83 is offset by 8.549699 and -3.133440 pixels which is larger than
2 X fitted extent = 7.155954 x 7.155954, not incorporating fit results
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:02:14 2011] Source is confused with source 88
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 7.78"
[Fri Nov 25 23:57:19 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.955
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 61 for pass 1, mean size = 7.78"
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src61.ximg exists
[Sat Nov 26 11:49:32 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src61_1.ximg exists
[Sat Nov 26 11:49:32 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src61 appears to have run properly
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sat Nov 26 11:49:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Sat Nov 26 11:51:34 2011] Source 83 is offset by -3.279335 and -8.129991 pixels which is larger than
2 X fitted extent = 0.897324 x 0.897324, not incorporating fit results
[Sat Nov 26 11:51:34 2011] Source 83 is offset by 8.549699 and -3.133440 pixels which is larger than
2 X fitted extent = 7.155954 x 7.155954, not incorporating fit results
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:21 2011] XMMSAS src. selection expression = ellipse(22866.757843, 27010.456757, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:43:21 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src83_src.reg
[Tue Nov 29 04:43:21 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (226, 274) - (301, 349)
[Tue Nov 29 04:43:21 2011] XMMSAS bgd. selection expression = annulus(22866.757843, 27010.456757, 1087.500000, 2175.000000, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(26282.433600, 28675.260000, 1244.368036, 1244.368036, 0.000000, X, Y) && !ellipse(25017.459800, 25138.974000, 500.624814, 500.624814, 0.000000, X, Y) && !ellipse(25509.908539, 27004.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24993.300903, 24572.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.742188, 26603.358459, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:21 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src83.gif
[Tue Nov 29 08:07:05 2011] Mean detx,y = (4085.42, -186.70) 
[Tue Nov 29 08:07:08 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:07:27 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:07:28 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Tue Nov 29 08:07:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Tue Nov 29 23:03:57 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 23:03:57 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:31 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:31 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Wed Nov 30 00:29:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:38 2011] Using photon index=1.80, rate=0.00517, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src83.arf
[Wed Nov 30 00:29:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:38 2011] Updating source flux to 5.6e-14
[Wed Nov 30 00:40:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting