[Thu Nov 24 05:21:06 2011] Detection parameters:
  Position = (293.8, 311.0) = 14 45 45.07 -62 28 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.9 +/- 30.1
  Background counts = 130.2
  Rate = 0.004 +/- 0.0004

[Thu Nov 24 05:21:09 2011] Off-axis axis estimate = 0.97'
[Thu Nov 24 16:42:30 2011] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 16:42:30 2011] Initial guess for spatial extent in simple fitting = 6.91"
[Thu Nov 24 16:42:30 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.916
[Thu Nov 24 16:42:30 2011] Giving source the simple spatial ID 66 for pass 0, mean size = 6.91"
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src66.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src66.csv
[Fri Nov 25 01:00:38 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src66_1.ximg exists
[Fri Nov 25 01:00:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src66.csv
[Fri Nov 25 01:00:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Fri Nov 25 01:00:42 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Fri Nov 25 01:00:42 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Fri Nov 25 01:02:13 2011] Source 82 is offset by 6.131523 and -7.397881 pixels which is larger than
2 X fitted extent = 0.794589 x 0.794589, not incorporating fit results
[Fri Nov 25 01:02:14 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:02:14 2011] Assessing source extent using major
[Fri Nov 25 01:02:14 2011] Source does appear to be extended
[Fri Nov 25 01:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 23:57:19 2011] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:57:19 2011] Initial guess for spatial extent in simple fitting = 6.91"
[Fri Nov 25 23:57:19 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.916
[Fri Nov 25 23:57:19 2011] Giving source the simple spatial ID 67 for pass 1, mean size = 6.91"
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src67.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src67.csv
[Sat Nov 26 11:49:33 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src67_1.ximg exists
[Sat Nov 26 11:49:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src67.csv
[Sat Nov 26 11:49:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sat Nov 26 11:49:37 2011] fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sat Nov 26 11:49:37 2011] Fit fullrun_mos2_xmm0504810201_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Sat Nov 26 11:51:33 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 82 at 22.894669 pixels away
[Sat Nov 26 11:51:34 2011] Source 82 is offset by -2.336773 and -6.507145 pixels which is larger than
2 X fitted extent = 3.438786 x 3.438786, not incorporating fit results
[Sat Nov 26 11:51:34 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:51:34 2011] Assessing source extent using major
[Sat Nov 26 11:51:34 2011] Source does appear to be extended
[Sat Nov 26 11:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 04:43:23 2011] XMMSAS src. selection expression = ellipse(25509.908539, 27004.918365, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 04:43:23 2011] Writing source region out to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src82_src.reg
[Tue Nov 29 04:43:23 2011] Extracting stamp from image fullrun_mos2_xmm0504810201_pi300-10000_cl_sm2.00.img.gz, (256, 273) - (331, 348)
[Tue Nov 29 04:43:23 2011] XMMSAS bgd. selection expression = annulus(25509.908539, 27004.918365, 1087.500000, 2175.000000, X, Y) && !ellipse(26668.119540, 25833.732200, 1078.000031, 1078.000031, 0.000000, X, Y) && !ellipse(26964.620000, 27064.718000, 723.760821, 723.760821, 0.000000, X, Y) && !ellipse(27792.418432, 28906.599316, 1417.256041, 858.493624, 102.582947, X, Y) && !ellipse(26043.432600, 23564.740000, 2284.624066, 1643.816047, 31.797900, X, Y) && !ellipse(26613.252000, 25264.346000, 976.216028, 976.216028, 0.000000, X, Y) && !ellipse(26424.450000, 24509.666000, 585.609617, 585.609617, 0.000000, X, Y) && !ellipse(26083.042000, 28273.630000, 645.227219, 645.227219, 0.000000, X, Y) && !ellipse(26438.932495, 27347.868500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26613.860200, 30018.151800, 1093.768031, 1093.768031, 0.000000, X, Y) && !ellipse(26487.381470, 27709.666687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25779.289920, 27856.571800, 397.180811, 397.180811, 0.000000, X, Y) && !ellipse(26282.433600, 28675.260000, 1244.368036, 1244.368036, 0.000000, X, Y) && !ellipse(27928.621643, 25118.926270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.598541, 24902.628998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.459800, 25138.974000, 500.624814, 500.624814, 0.000000, X, Y) && !ellipse(30224.778000, 28356.614000, 2731.992079, 2731.992079, 0.000000, X, Y) && !ellipse(22866.757843, 27010.456757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24993.300903, 24572.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26984.665802, 24527.014038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.742188, 26603.358459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.286865, 24178.660919, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 04:43:23 2011] Writing fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src82.gif
[Tue Nov 29 08:40:19 2011] Mean detx,y = (1351.08, -521.91) 
[Tue Nov 29 08:40:22 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 08:40:45 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 08:40:45 2011] Setting source spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Tue Nov 29 08:40:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Tue Nov 29 23:29:56 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 23:29:56 2011] rmf not generated due to insufficient counts
[Wed Nov 30 00:29:32 2011] Updating aperture counts using extracted products
[Wed Nov 30 00:29:32 2011] Error reading totcts from fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Wed Nov 30 00:29:38 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 00:29:38 2011] Using photon index=1.80, rate=0.00448, arf fullrun_mos2_xmm0504810201_pi300-10000_pass1_cl_src82.arf
[Wed Nov 30 00:29:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 00:29:39 2011] Updating source flux to 4.8e-14
[Wed Nov 30 00:40:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting